This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear GRAHAMC, This is a computer-generated error report created automatically by CPANPLUS, version 0.83_09. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Fri Dec 7 03:48:23 2007] Trying to get 'http://www.cpan.org/authors/id/G/GR/GRAHAMC/Geo-Coordinates-UTM-0.07.tar.gz' [MSG] [Fri Dec 7 03:48:26 2007] Trying to get 'http://www.cpan.org/authors/id/G/GR/GRAHAMC/CHECKSUMS' [MSG] [Fri Dec 7 03:48:27 2007] Checksum matches for 'Geo-Coordinates-UTM-0.07.tar.gz' [MSG] [Fri Dec 7 03:48:27 2007] Extracted 'Geo-Coordinates-UTM-0.07/' [MSG] [Fri Dec 7 03:48:27 2007] Extracted 'Geo-Coordinates-UTM-0.07/Changes' [MSG] [Fri Dec 7 03:48:27 2007] Extracted 'Geo-Coordinates-UTM-0.07/t/' [MSG] [Fri Dec 7 03:48:27 2007] Extracted 'Geo-Coordinates-UTM-0.07/t/02_points.t' [MSG] [Fri Dec 7 03:48:27 2007] Extracted 'Geo-Coordinates-UTM-0.07/t/01_basic_settings.t' [MSG] [Fri Dec 7 03:48:28 2007] Extracted 'Geo-Coordinates-UTM-0.07/README' [MSG] [Fri Dec 7 03:48:28 2007] Extracted 'Geo-Coordinates-UTM-0.07/MANIFEST' [MSG] [Fri Dec 7 03:48:28 2007] Extracted 'Geo-Coordinates-UTM-0.07/Makefile.PL' [MSG] [Fri Dec 7 03:48:28 2007] Extracted 'Geo-Coordinates-UTM-0.07/UTM.pm' [MSG] [Fri Dec 7 03:48:28 2007] Extracted 'Geo-Coordinates-UTM-0.07/META.yml' [MSG] [Fri Dec 7 03:48:28 2007] Extracted 'Geo::Coordinates::UTM' to '/export/home/chris/perl5.10.0/.cpanplus/5.10.0/build/Geo-Coordinates-UTM-0.07' [MSG] [Fri Dec 7 03:48:29 2007] Checking if your kit is complete... Looks good Writing Makefile for Geo::Coordinates::UTM [MSG] [Fri Dec 7 03:48:29 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Dec 7 03:48:32 2007] cp UTM.pm blib/lib/Geo/Coordinates/UTM.pm Manifying blib/man3/Geo::Coordinates::UTM.3 [ERROR] [Fri Dec 7 03:48:48 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /export/home/chris/perl5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/01_basic_settings......ok t/02_points.............. # Failed test 'fz longitude (zone 60J) 2' # at t/02_points.t line 16. # floating point value 1784763805.8408 too different to reference 176.847283481794 # Failed test 'fz latitude (zone 60J) 2' # at t/02_points.t line 16. # floating point value -26873996302.6418 too different to reference -25.9668774017417 # Failed test 'fz longitude (zone 60H) 223' # at t/02_points.t line 16. # floating point value 3947168821.35062 too different to reference 174.953950987426 # Failed test 'fz latitude (zone 60H) 223' # at t/02_points.t line 16. # floating point value -95550815135.1866 too different to reference -32.7058399004368 # Failed test 'fz longitude (zone 60C) 273' # at t/02_points.t line 16. # floating point value -46096.2325625247 too different to reference 178.530333926786 # Failed test 'fz latitude (zone 60C) 273' # at t/02_points.t line 16. # floating point value 120272.227320738 too different to reference -76.6120600397079 # Failed test 'fz longitude (zone 1G) 293' # at t/02_points.t line 16. # floating point value 736772512133.678 too different to reference -179.11990259409 # Failed test 'fz latitude (zone 1G) 293' # at t/02_points.t line 16. # floating point value -56673505613367.3 too different to reference -44.7032654610135 # Failed test 'fz longitude (zone 60W) 364' # at t/02_points.t line 16. # floating point value 1910966861.49365 too different to reference 174.437251264525 # Failed test 'fz latitude (zone 60W) 364' # at t/02_points.t line 16. # floating point value 36933435643.1145 too different to reference 67.7170047755081 # Failed test 'fz longitude (zone 1G) 435' # at t/02_points.t line 16. # floating point value -265729211642.829 too different to reference -174.563276761252 # Failed test 'fz latitude (zone 1G) 435' # at t/02_points.t line 16. # floating point value 16100296086588.4 too different to reference -44.4500025316326 # Failed test 'fz longitude (zone 59N) 542' # at t/02_points.t line 16. # floating point value -13817067412094.6 too different to reference 168.503947958448 # Failed test 'fz latitude (zone 59N) 542' # at t/02_points.t line 16. # floating point value 1.1878325944822e+15 too different to reference 7.04533528057556 # Failed test 'fz longitude (zone 60N) 609' # at t/02_points.t line 16. # floating point value 47751959001845.9 too different to reference 174.81595471932 # Failed test 'fz latitude (zone 60N) 609' # at t/02_points.t line 16. # floating point value 8.53275600844402e+15 too different to reference 3.54293898179039 # Failed test 'fz longitude (zone 1S) 822' # at t/02_points.t line 16. # floating point value -3318716094675.71 too different to reference -176.036941916601 # Failed test 'fz latitude (zone 1S) 822' # at t/02_points.t line 16. # floating point value -160692379128067 too different to reference 39.6262193018376 # Failed test 'fz longitude (zone 1K) 833' # at t/02_points.t line 16. # floating point value -200114663401495 too different to reference -174.197788153224 # Failed test 'fz latitude (zone 1K) 833' # at t/02_points.t line 16. # floating point value -1.7216198771555e+16 too different to reference -16.2686031840395 # Failed test 'fz longitude (zone 60U) 884' # at t/02_points.t line 16. # floating point value 520469409539.289 too different to reference 175.293568765728 # Failed test 'fz latitude (zone 60U) 884' # at t/02_points.t line 16. # floating point value 31847719811078.2 too different to reference 51.8498991358998 # Failed test 'fz longitude (zone 59V) 912' # at t/02_points.t line 16. # floating point value -515477189466.47 too different to reference 171.061522099043 # Failed test 'fz latitude (zone 59V) 912' # at t/02_points.t line 16. # floating point value -25208944181736.3 too different to reference 56.3836532184208 # Failed test 'fz longitude (zone 1Q) 938' # at t/02_points.t line 16. # floating point value -9.18596158497168e+15 too different to reference -175.62673930873 # Failed test 'fz latitude (zone 1Q) 938' # at t/02_points.t line 16. # floating point value 6.47784607887517e+17 too different to reference 17.724839026044 # Failed test 'fz longitude (zone 60R) 944' # at t/02_points.t line 16. # floating point value 1332850857.33011 too different to reference 178.022588263852 # Failed test 'fz latitude (zone 60R) 944' # at t/02_points.t line 16. # floating point value -17129468940.8606 too different to reference 27.5894439325656 # Failed test 'fz longitude (zone 60N) 955' # at t/02_points.t line 16. # floating point value 25584056648279.7 too different to reference 178.566129759528 # Failed test 'fz latitude (zone 60N) 955' # at t/02_points.t line 16. # floating point value -537675028616809 too different to reference 0.7476776507023 # Looks like you failed 30 tests of 9991. Dubious, test returned 30 (wstat 7680, 0x1e00) Failed 30/9991 subtests Test Summary Report ------------------- t/02_points.t (Wstat: 7680 Tests: 9991 Failed: 30) Failed test number(s): 10-11, 2220-2221, 2720-2721, 2920-2921 3630-3631, 4340-4341, 5410-5411, 6080-6081 8210-8211, 8320-8321, 8830-8831, 9110-9111 9370-9371, 9430-9431, 9540-9541 Non-zero exit status: 30 Files=2, Tests=9994, 15 wallclock secs ( 4.18 usr 0.30 sys + 7.26 cusr 0.51 csys = 12.25 CPU) Result: FAIL Failed 1/2 test programs. 30/9994 subtests failed. make: *** [test_dynamic] Error 30 [MSG] [Fri Dec 7 03:48:48 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/usr/bin/X11:/usr/games PERL5LIB = :/export/home/chris/perl5.10.0/.cpanplus/5.10.0/build/Geo-Coordinates-UTM-0.07/blib/lib:/export/home/chris/perl5.10.0/.cpanplus/5.10.0/build/Geo-Coordinates-UTM-0.07/blib/arch:/export/home/chris/perl5.10.0/.cpanplus/5.10.0/build/Geo-Coordinates-UTM-0.07/blib PERL5_CPANPLUS_IS_RUNNING = 3329 PERL5_CPANPLUS_IS_VERSION = 0.83_09 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /export/home/chris/perl5.10.0/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 10 10 EGID: $) = 10 10 ------------------------------- -- Summary of my perl5 (revision 5 version 10 subversion 0) configuration: Platform: osname=solaris, osvers=2.11, archname=i386-pc-solaris2.11-thread-multi-64int uname='sunos wobble 5.11 nexentaos_20070402 i86pc i386 i86pc solaris ' config_args='-e -Dprefix=/export/home/chris/perl5.10.0 -Dusethreads -Duse64bitint -Dusemymalloc' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -DPTR_IS_LONG -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV', optimize='-O', cppflags='-D_REENTRANT -DPTR_IS_LONG -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.0.3 (GNU_Solaris 4.0.3-1nexenta6)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib ' libpth=/usr/local/lib /usr/lib /usr/ccs/lib libs=-lsocket -lnsl -lgdbm -ldl -lm -lpthread -lc perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' -Wl,-E' cccdlflags='-fPIC', lddlflags=' -Wl,-E -G -L/usr/local/lib'
