This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Philip Gwyn, This is a computer-generated report for POE-XUL-0.0100 on perl-5.9.5, created automatically by CPAN-Reporter-1.06 and sent to the CPAN Testers mailing list. If you have received this email directly, it is because the person testing your distribution chose to send a copy to your CPAN email address; there may be a delay before the official report is received and processed by CPAN Testers. Thank you for uploading your work to CPAN. However, it appears that there were some problems with your distribution. If these results are not what you expect or if you would like to learn how to avoid FAIL reports for missing dependencies, unsupported operating systems, etc., please consult "Notes for CPAN Authors" on the CPAN Testers Wiki: http://cpantest.grango.org Sections of this report: * Tester comments * Program output * Prerequisites * Environment and other context ------------------------------ TESTER COMMENTS ------------------------------ Additional comments from tester: [none provided] ------------------------------ PROGRAM OUTPUT ------------------------------ Output from '/usr/bin/make test': PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/perl/pNaGaP6/[EMAIL PROTECTED]/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00_compile..............ok t/10_node.................ok t/11_mixedmode............ok t/20_changemanager........# The following warning about an unknown child may be ignored Attempt to remove an unknown child node at t/20_changemanager.t line 162 ok t/21_cm_instructions......ok t/25_cm_leaks.............# The following warning about an unknown child may be ignored Attempt to remove an unknown child node at t/25_cm_leaks.t line 54 ok t/26_cm_cycle.............ok t/30_logging..............ok t/31_log_poe..............ok t/32_log_4_perl...........ok t/50_poe..................# sleep 5 # http://localhost:8881 JSON::XS::from_json has been renamed to decode_json, either downgrade to pre-2.0 versions of JSON::XS or rename the call at t/Client.pm line 60 # Looks like you planned 138 tests but only ran 2. # Looks like your test died just after 2. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 136/138 subtests t/51_error................# # # We are testing several error conditions. Because of this you are # going to see some error messages. These may be ignored # # sleep 5 # http://localhost:8881 404 <html> <head><title>404 absent</title></head> <body> <h1>Écheque au démarrage</h1> <p>Application inconue : Bad</p> </body> </html> 410 <html> <head><title>410 absent</title></head> <body> <h1>Session inexistante</h1> <p>La session <tt>honk-honk</tt> n'existe pas. Elle doit être expirée.</p> </body> </html> 415 Error while argument parsing: Unsupported Media Type (415) 405 Error while argument parsing: Method Not Allowed (405) 400 Error while argument parsing: Bad Request (400) JSON::XS::from_json has been renamed to decode_json, either downgrade to pre-2.0 versions of JSON::XS or rename the call at t/Client.pm line 60 # Looks like your test died just after 13. Dubious, test returned 255 (wstat 65280, 0xff00) All 13 subtests passed t/55_concurrent...........# prog=/usr/local/bin/perl -Iblib/lib t/test-app.pl 8881 t-tmp # sleep 5 # STDERR Can't locate MIME/Types.pm in @INC (@INC contains: blib/lib /home/sand/.cpan/build/POE-XUL-0.0100-99VAO0/blib/lib /home/sand/.cpan/build/POE-XUL-0.0100-99VAO0/blib/arch /usr/local/perl-5.8.7/lib/5.8.7/i686-linux-64int /usr/local/perl-5.8.7/lib/5.8.7 /usr/local/perl-5.8.7/lib/site_perl/5.8.7/i686-linux-64int /usr/local/perl-5.8.7/lib/site_perl/5.8.7 /usr/local/perl-5.8.7/lib/site_perl .) at blib/lib/POE/Component/XUL.pm line 15. # STDERR BEGIN failed--compilation aborted at blib/lib/POE/Component/XUL.pm line 15. # STDERR Compilation failed in require at t/test-app.pl line 8. # STDERR BEGIN failed--compilation aborted at t/test-app.pl line 8. # Failed test ''boot' successful' # at t/Client.pm line 53. # Failed test 'Right content type' # at t/Client.pm line 55. # got: '' # expected: 'application/json' <html> <HEAD><TITLE>Error: Internal Server Error</TITLE></HEAD> <BODY> <H1>Error: Internal Server Error</H1> Cannot connect to localhost:8881 (connect error 111: Verbindungsaufbau abgelehnt) </BODY> </HTML> # Looks like you planned 560 tests but only ran 2. # Looks like you failed 2 tests of 2 run. # Looks like your test died just after 2. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 560/560 subtests t/56_timeout..............# sleep 5 # http://localhost:8881 at t/test-timeout.pl line 21. JSON::XS::from_json has been renamed to decode_json, either downgrade to pre-2.0 versions of JSON::XS or rename the call at t/Client.pm line 60 # Looks like you planned 48 tests but only ran 5. # Looks like your test died just after 5. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 43/48 subtests t/60_static...............# sleep 5 # http://localhost:8881 ok t/61_error................# # # We are testing several error conditions. Because of this you are # going to see some error messages. These may be ignored # # sleep 5 # http://localhost:8881 405 Error while POST: Method Not Allowed (405) 404 <html> <head><title>404 N'existe pas</title></head> <body> <h1>Le fichier que vous cherchez ne semble pas exister.</h1> <pre>Unknown file 'poe-xul/xul/HONK/bonk/ZONK'</pre> </body> </html> ok t/62_build_file...........ok t/70_xul_from.............# sleep 5 # http://localhost:8881 JSON::XS::from_json has been renamed to decode_json, either downgrade to pre-2.0 versions of JSON::XS or rename the call at t/Client.pm line 60 # Looks like you planned 12 tests but only ran 2. # Looks like your test died just after 2. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 10/12 subtests t/75_framify..............# sleep 5 # http://localhost:8881 JSON::XS::from_json has been renamed to decode_json, either downgrade to pre-2.0 versions of JSON::XS or rename the call at t/Client.pm line 60 # Looks like you planned 532 tests but only ran 2. # Looks like your test died just after 2. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 530/532 subtests t/90_complete.............# sleep 3 # http://localhost:8881 JSON::XS::from_json has been renamed to decode_json, either downgrade to pre-2.0 versions of JSON::XS or rename the call at t/Client.pm line 60 # Looks like you planned 733 tests but only ran 2. # Looks like your test died just after 2. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 731/733 subtests t/95_searchlist...........# sleep 5 # http://localhost:8881 JSON::XS::from_json has been renamed to decode_json, either downgrade to pre-2.0 versions of JSON::XS or rename the call at t/Client.pm line 60 # Looks like you planned 30 tests but only ran 2. # Looks like your test died just after 2. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 28/30 subtests Test Summary Report ------------------- t/50_poe.t (Wstat: 65280 Tests: 2 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 138 tests but ran 2. t/51_error.t (Wstat: 65280 Tests: 13 Failed: 0) Non-zero exit status: 255 t/55_concurrent.t (Wstat: 65280 Tests: 2 Failed: 2) Failed test number(s): 1-2 Non-zero exit status: 255 Parse errors: Bad plan. You planned 560 tests but ran 2. t/56_timeout.t (Wstat: 65280 Tests: 5 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 48 tests but ran 5. t/70_xul_from.t (Wstat: 65280 Tests: 2 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 12 tests but ran 2. t/75_framify.t (Wstat: 65280 Tests: 2 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 532 tests but ran 2. t/90_complete.t (Wstat: 65280 Tests: 2 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 733 tests but ran 2. t/95_searchlist.t (Wstat: 65280 Tests: 2 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 30 tests but ran 2. Files=21, Tests=333, 70 wallclock secs ( 0.34 usr 0.02 sys + 16.25 cusr 1.18 csys = 17.79 CPU) Result: FAIL Failed 8/21 test programs. 2/333 subtests failed. make: *** [test_dynamic] Fehler 255 ------------------------------ PREREQUISITES ------------------------------ Prerequisite modules loaded: requires: Module Need Have ---------------------------- ------ ------- Carp 0 1.07 Digest::MD5 2.3 2.36_01 HTTP::Date 1.4 1.47 HTTP::Status 1 1.28 JSON::XS 0.8 2.01 MIME::Types 0 1.22 POE 0.9500 0.9999 POE::Component::Server::HTTP 0.09 0.09 Scalar::Util 1.13 1.19 Test::More 0.60 0.72 Time::HiRes 1 1.9711 Unicode::String 2 2.09 ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: LANG = de_DE.UTF-8 PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin PERL5LIB = PERL5_CPANPLUS_IS_RUNNING = 17159 PERL5_CPAN_IS_RUNNING = 17159 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/bin/zsh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): $^X = /home/src/perl/repoperls/installed-perls/perl/pNaGaP6/[EMAIL PROTECTED]/bin/perl $UID/$EUID = 1005 / 1005 $GID = 1005 1005 $EGID = 1005 1005 Perl module toolchain versions installed: Module Have ------------------- ------- CPAN 1.9205 Cwd 3.25 ExtUtils::CBuilder 0.19 ExtUtils::Command 1.13 ExtUtils::Install 1.44 ExtUtils::MakeMaker 6.40 ExtUtils::Manifest 1.51_01 ExtUtils::ParseXS 2.18 File::Spec 3.25 Module::Build 0.2808 Module::Signature 0.55 Test::Harness 3.04 Test::More 0.72 YAML 0.65 YAML::Syck 0.97 version 0.7203 -- Summary of my perl5 (revision 5 version 9 subversion 5) configuration: Platform: osname=linux, osvers=2.6.22-1-k7, archname=i686-linux-64int uname='linux k75 2.6.22-1-k7 #1 smp sun jul 29 15:15:55 utc 2007 i686 gnulinux ' config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/perl/pNaGaP6/[EMAIL PROTECTED] -Dinstallusrbinperl=n -Uversiononly -Doptimize=-g -des -Duse64bitint -Dusedevel' hint=recommended, useposix=true, d_sigaction=define useithreads=undef, usemultiplicity=undef useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g', cppflags='-DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib /usr/lib64 libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc libc=/lib/libc-2.6.1.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.6.1' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fPIC', lddlflags='-shared -g -L/usr/local/lib'
