This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear GRAHAMC, This is a computer-generated error report created automatically by CPANPLUS, version 0.82. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sat Dec 8 00:18:02 2007] Trying to get 'http://www.cpan.org/authors/id/G/GR/GRAHAMC/Geo-Coordinates-UTM-0.07.tar.gz' [MSG] [Sat Dec 8 00:18:04 2007] Trying to get 'http://www.cpan.org/authors/id/G/GR/GRAHAMC/CHECKSUMS' [MSG] [Sat Dec 8 00:18:05 2007] Checksum matches for 'Geo-Coordinates-UTM-0.07.tar.gz' [MSG] [Sat Dec 8 00:18:06 2007] Extracted 'Geo-Coordinates-UTM-0.07/' [MSG] [Sat Dec 8 00:18:06 2007] Extracted 'Geo-Coordinates-UTM-0.07/Changes' [MSG] [Sat Dec 8 00:18:06 2007] Extracted 'Geo-Coordinates-UTM-0.07/t/' [MSG] [Sat Dec 8 00:18:06 2007] Extracted 'Geo-Coordinates-UTM-0.07/t/02_points.t' [MSG] [Sat Dec 8 00:18:06 2007] Extracted 'Geo-Coordinates-UTM-0.07/t/01_basic_settings.t' [MSG] [Sat Dec 8 00:18:06 2007] Extracted 'Geo-Coordinates-UTM-0.07/README' [MSG] [Sat Dec 8 00:18:06 2007] Extracted 'Geo-Coordinates-UTM-0.07/MANIFEST' [MSG] [Sat Dec 8 00:18:06 2007] Extracted 'Geo-Coordinates-UTM-0.07/Makefile.PL' [MSG] [Sat Dec 8 00:18:06 2007] Extracted 'Geo-Coordinates-UTM-0.07/UTM.pm' [MSG] [Sat Dec 8 00:18:06 2007] Extracted 'Geo-Coordinates-UTM-0.07/META.yml' [MSG] [Sat Dec 8 00:18:06 2007] Extracted 'Geo::Coordinates::UTM' to '/opt/perl/testers/.cpanplus/5.8.8/build/Geo-Coordinates-UTM-0.07' [MSG] [Sat Dec 8 00:18:06 2007] Checking if your kit is complete... Looks good Writing Makefile for Geo::Coordinates::UTM [MSG] [Sat Dec 8 00:18:06 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sat Dec 8 00:18:07 2007] cp UTM.pm blib/lib/Geo/Coordinates/UTM.pm Manifying blib/man3/Geo::Coordinates::UTM.3 [ERROR] [Sat Dec 8 00:18:10 2007] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) t/01_basic_settings......ok t/02_points.............. # Failed test 'fz longitude (zone 60N) 86' # at t/02_points.t line 16. # floating point value -197803765303640.574 too different to reference 174.654184750992 # Failed test 'fz latitude (zone 60N) 86' # at t/02_points.t line 16. # floating point value 36528982783944148.4 too different to reference 0.173063552093197 # Failed test 'fz longitude (zone 1N) 229' # at t/02_points.t line 16. # floating point value -276859223864393.147 too different to reference -174.161351096588 # Failed test 'fz latitude (zone 1N) 229' # at t/02_points.t line 16. # floating point value 45536751102950428.5 too different to reference 4.91799601358203 # Failed test 'fz longitude (zone 59T) 247' # at t/02_points.t line 16. # floating point value 936237761037.622698 too different to reference 169.136911121965 # Failed test 'fz latitude (zone 59T) 247' # at t/02_points.t line 16. # floating point value -56984989176744.8728 too different to reference 44.3698039723548 # Failed test 'fz longitude (zone 60C) 273' # at t/02_points.t line 16. # floating point value -46096.2325625308731 too different to reference 178.530333926786 # Failed test 'fz latitude (zone 60C) 273' # at t/02_points.t line 16. # floating point value 120272.227320774188 too different to reference -76.6120600397079 # Failed test 'fz longitude (zone 60W) 364' # at t/02_points.t line 16. # floating point value 760317691816.139261 too different to reference 174.437251264525 # Failed test 'fz latitude (zone 60W) 364' # at t/02_points.t line 16. # floating point value 11352528238884.336 too different to reference 67.7170047755081 # Failed test 'fz longitude (zone 60N) 609' # at t/02_points.t line 16. # floating point value -127840346841163.317 too different to reference 174.81595471932 # Failed test 'fz latitude (zone 60N) 609' # at t/02_points.t line 16. # floating point value -24006398576413362.4 too different to reference 3.54293898179039 # Failed test 'fz longitude (zone 1K) 629' # at t/02_points.t line 16. # floating point value -17874419249144503 too different to reference -178.027089960346 # Failed test 'fz latitude (zone 1K) 629' # at t/02_points.t line 16. # floating point value -829792550303324213 too different to reference -21.7374795357266 # Failed test 'fz longitude (zone 1H) 691' # at t/02_points.t line 16. # floating point value 19317969728.3997029 too different to reference -174.576952777604 # Failed test 'fz latitude (zone 1H) 691' # at t/02_points.t line 16. # floating point value -426141908038.860471 too different to reference -32.9284160914746 # Failed test 'fz longitude (zone 1C) 696' # at t/02_points.t line 16. # floating point value 160.241138933689672 too different to reference -178.667252355676 # Failed test 'fz latitude (zone 1C) 696' # at t/02_points.t line 16. # floating point value 789.169939565407809 too different to reference -79.9635778969601 # Failed test 'fz longitude (zone 1E) 775' # at t/02_points.t line 16. # floating point value 55855886447.1887874 too different to reference -177.53261758132 # Failed test 'fz latitude (zone 1E) 775' # at t/02_points.t line 16. # floating point value 2520389222100.13659 too different to reference -58.9746255467707 # Failed test 'fz longitude (zone 1K) 833' # at t/02_points.t line 16. # floating point value -200114663401795.122 too different to reference -174.197788153224 # Failed test 'fz latitude (zone 1K) 833' # at t/02_points.t line 16. # floating point value -17216198771579471.7 too different to reference -16.2686031840395 # Failed test 'fz longitude (zone 60C) 871' # at t/02_points.t line 16. # floating point value 5147977.60720092751 too different to reference 177.199081842649 # Failed test 'fz latitude (zone 60C) 871' # at t/02_points.t line 16. # floating point value -36223384.1805736533 too different to reference -73.5905477131022 # Failed test 'fz longitude (zone 60U) 884' # at t/02_points.t line 16. # floating point value 520469409539.54285 too different to reference 175.293568765728 # Failed test 'fz latitude (zone 60U) 884' # at t/02_points.t line 16. # floating point value 31847719811092.0977 too different to reference 51.8498991358998 # Failed test 'fz longitude (zone 60R) 944' # at t/02_points.t line 16. # floating point value 10808630890.2766895 too different to reference 178.022588263852 # Failed test 'fz latitude (zone 60R) 944' # at t/02_points.t line 16. # floating point value 112052800911.687727 too different to reference 27.5894439325656 # Failed test 'fz longitude (zone 60N) 955' # at t/02_points.t line 16. # floating point value 25584056648279.889 too different to reference 178.566129759528 # Failed test 'fz latitude (zone 60N) 955' # at t/02_points.t line 16. # floating point value -537675028617103.843 too different to reference 0.7476776507023 # Looks like you failed 30 tests of 9991. Dubious, test returned 30 (wstat 7680, 0x1e00) Failed 30/9991 subtests Test Summary Report ------------------- t/02_points.t (Wstat: 7680 Tests: 9991 Failed: 30) Failed test number(s): 850-851, 2280-2281, 2460-2461, 2720-2721 3630-3631, 6080-6081, 6280-6281, 6900-6901 6950-6951, 7740-7741, 8320-8321, 8700-8701 8830-8831, 9430-9431, 9540-9541 Non-zero exit status: 30 Files=2, Tests=9994, 3 wallclock secs ( 2.13 usr 0.05 sys + 2.70 cusr 0.13 csys = 5.01 CPU) Result: FAIL Failed 1/2 test programs. 30/9994 subtests failed. make: *** [test_dynamic] Error 30 [MSG] [Sat Dec 8 00:18:10 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.03. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007 x86_64 gnulinux ' config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true [EMAIL PROTECTED]' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g -O3', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8 alignbytes=16, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE' cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
