This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear VLADO, This is a computer-generated error report created automatically by CPANPLUS, version 0.83_08. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Tue Dec 11 01:35:16 2007] Trying to get 'http://www.cpan.org/authors/id/V/VL/VLADO/AI-NaiveBayes1-1.3.tar.gz' [MSG] [Tue Dec 11 01:35:18 2007] Trying to get 'http://www.cpan.org/authors/id/V/VL/VLADO/CHECKSUMS' [MSG] [Tue Dec 11 01:35:19 2007] Checksum matches for 'AI-NaiveBayes1-1.3.tar.gz' [MSG] [Tue Dec 11 01:35:19 2007] Extracted 'AI-NaiveBayes1-1.3/' [MSG] [Tue Dec 11 01:35:19 2007] Extracted 'AI-NaiveBayes1-1.3/META.yml' [MSG] [Tue Dec 11 01:35:19 2007] Extracted 'AI-NaiveBayes1-1.3/MANIFEST' [MSG] [Tue Dec 11 01:35:19 2007] Extracted 'AI-NaiveBayes1-1.3/README' [MSG] [Tue Dec 11 01:35:19 2007] Extracted 'AI-NaiveBayes1-1.3/Makefile.PL' [MSG] [Tue Dec 11 01:35:19 2007] Extracted 'AI-NaiveBayes1-1.3/t/' [MSG] [Tue Dec 11 01:35:19 2007] Extracted 'AI-NaiveBayes1-1.3/t/8-1.out' [MSG] [Tue Dec 11 01:35:19 2007] Extracted 'AI-NaiveBayes1-1.3/t/5.t' [MSG] [Tue Dec 11 01:35:19 2007] Extracted 'AI-NaiveBayes1-1.3/t/4-3.out' [MSG] [Tue Dec 11 01:35:19 2007] Extracted 'AI-NaiveBayes1-1.3/t/auxfunctions.pl' [MSG] [Tue Dec 11 01:35:19 2007] Extracted 'AI-NaiveBayes1-1.3/t/6-3.out' [MSG] [Tue Dec 11 01:35:19 2007] Extracted 'AI-NaiveBayes1-1.3/t/8.t' [MSG] [Tue Dec 11 01:35:19 2007] Extracted 'AI-NaiveBayes1-1.3/t/2.t' [MSG] [Tue Dec 11 01:35:19 2007] Extracted 'AI-NaiveBayes1-1.3/t/5-3.out' [MSG] [Tue Dec 11 01:35:19 2007] Extracted 'AI-NaiveBayes1-1.3/t/6-2.out' [MSG] [Tue Dec 11 01:35:19 2007] Extracted 'AI-NaiveBayes1-1.3/t/3-1.out' [MSG] [Tue Dec 11 01:35:19 2007] Extracted 'AI-NaiveBayes1-1.3/t/6-1.out' [MSG] [Tue Dec 11 01:35:20 2007] Extracted 'AI-NaiveBayes1-1.3/t/a2.arff' [MSG] [Tue Dec 11 01:35:20 2007] Extracted 'AI-NaiveBayes1-1.3/t/2-3.out' [MSG] [Tue Dec 11 01:35:20 2007] Extracted 'AI-NaiveBayes1-1.3/t/1-1.out' [MSG] [Tue Dec 11 01:35:20 2007] Extracted 'AI-NaiveBayes1-1.3/t/7.t' [MSG] [Tue Dec 11 01:35:20 2007] Extracted 'AI-NaiveBayes1-1.3/t/4-2.out' [MSG] [Tue Dec 11 01:35:20 2007] Extracted 'AI-NaiveBayes1-1.3/t/6.t' [MSG] [Tue Dec 11 01:35:20 2007] Extracted 'AI-NaiveBayes1-1.3/t/1.t' [MSG] [Tue Dec 11 01:35:20 2007] Extracted 'AI-NaiveBayes1-1.3/t/6-4.out' [MSG] [Tue Dec 11 01:35:20 2007] Extracted 'AI-NaiveBayes1-1.3/t/2-2.out' [MSG] [Tue Dec 11 01:35:20 2007] Extracted 'AI-NaiveBayes1-1.3/t/3-2.out' [MSG] [Tue Dec 11 01:35:20 2007] Extracted 'AI-NaiveBayes1-1.3/t/7-2.out' [MSG] [Tue Dec 11 01:35:20 2007] Extracted 'AI-NaiveBayes1-1.3/t/3.t' [MSG] [Tue Dec 11 01:35:20 2007] Extracted 'AI-NaiveBayes1-1.3/t/2-1.out' [MSG] [Tue Dec 11 01:35:20 2007] Extracted 'AI-NaiveBayes1-1.3/t/4.t' [MSG] [Tue Dec 11 01:35:20 2007] Extracted 'AI-NaiveBayes1-1.3/t/1-2.out' [MSG] [Tue Dec 11 01:35:20 2007] Extracted 'AI-NaiveBayes1-1.3/t/5-2.out' [MSG] [Tue Dec 11 01:35:20 2007] Extracted 'AI-NaiveBayes1-1.3/t/4-1.out' [MSG] [Tue Dec 11 01:35:20 2007] Extracted 'AI-NaiveBayes1-1.3/t/3-3.out' [MSG] [Tue Dec 11 01:35:20 2007] Extracted 'AI-NaiveBayes1-1.3/t/5-1.out' [MSG] [Tue Dec 11 01:35:20 2007] Extracted 'AI-NaiveBayes1-1.3/t/7-1.out' [MSG] [Tue Dec 11 01:35:20 2007] Extracted 'AI-NaiveBayes1-1.3/NaiveBayes1.pm' [MSG] [Tue Dec 11 01:35:20 2007] Extracted 'AI-NaiveBayes1-1.3/Changes' [MSG] [Tue Dec 11 01:35:20 2007] Extracted 'AI::NaiveBayes1' to '/home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3' [MSG] [Tue Dec 11 01:35:23 2007] Checking if your kit is complete... Looks good Writing Makefile for AI::NaiveBayes1 [MSG] [Tue Dec 11 01:35:23 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Tue Dec 11 01:35:25 2007] cp NaiveBayes1.pm blib/lib/AI/NaiveBayes1.pm Manifying blib/man3/AI::NaiveBayes1.3 [ERROR] [Tue Dec 11 01:35:30 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/1...... # Failed test in t/1.t at line 23. # got: 'Model: # category | P(category) # ----------+------------- # repairs=Y | 0.38 # repairs=N | 0.62 # ----------+------------- # # category | model | P( model | category ) # ----------+-------+----------------------- # repairs=Y | H | 0.631578947368421053 # repairs=Y | T | 0.368421052631578947 # ----------+-------+----------------------- # repairs=N | H | 0.20967741935483871 # repairs=N | T | 0.79032258064516129 # ----------+-------+----------------------- # # category | place | P( place | category ) # ----------+-------+----------------------- # repairs=Y | B | 0.684210526315789474 # repairs=Y | N | 0.315789473684210526 # ----------+-------+----------------------- # repairs=N | B | 0.193548387096774194 # repairs=N | N | 0.806451612903225806 # ----------+-------+----------------------- # # ' # expected: 'Model: # category | P(category) # ----------+------------- # repairs=Y | 0.38 # repairs=N | 0.62 # ----------+------------- # # category | model | P( model | category ) # ----------+-------+----------------------- # repairs=Y | H | 0.631578947368421 # repairs=Y | T | 0.368421052631579 # ----------+-------+----------------------- # repairs=N | H | 0.209677419354839 # repairs=N | T | 0.790322580645161 # ----------+-------+----------------------- # # category | place | P( place | category ) # ----------+-------+----------------------- # repairs=Y | B | 0.684210526315789 # repairs=Y | N | 0.315789473684211 # ----------+-------+----------------------- # repairs=N | B | 0.193548387096774 # repairs=N | N | 0.806451612903226 # ----------+-------+----------------------- # # ' Can't locate YAML.pm in @INC (@INC contains: /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/lib/AI/NaiveBayes1.pm line 375. # Looks like you planned 4 tests but only ran 2. # Looks like you failed 1 test of 2 run. # Looks like your test died just after 2. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 3/4 subtests t/2...... # Failed test in t/2.t at line 65. # got: 'Model: # category | P(category) # ---------+------------- # spam=N | 0.15 # spam=Y | 0.85 # ---------+------------- # # category | html | P( html | category ) # ---------+------+----------------------- # spam=N | N | 0.666666666666666667 # spam=N | Y | 0.333333333333333333 # ---------+------+----------------------- # spam=Y | N | 0.0588235294117647059 # spam=Y | Y | 0.941176470588235294 # ---------+------+----------------------- # # category | morning | P( morning | category ) # ---------+---------+------------------------- # spam=N | N | 0.333333333333333333 # spam=N | Y | 0.666666666666666667 # ---------+---------+------------------------- # spam=Y | N | 0.647058823529411765 # spam=Y | Y | 0.352941176470588235 # ---------+---------+------------------------- # # category | size1 | P( size1 | category ) # ---------+-------+----------------------- # spam=N | L | 0.333333333333333333 # spam=N | S | 0.666666666666666667 # ---------+-------+----------------------- # spam=Y | L | 0.588235294117647059 # spam=Y | S | 0.411764705882352941 # ---------+-------+----------------------- # # ' # expected: 'Model: # category | P(category) # ---------+------------- # spam=N | 0.15 # spam=Y | 0.85 # ---------+------------- # # category | html | P( html | category ) # ---------+------+---------------------- # spam=N | N | 0.666666666666667 # spam=N | Y | 0.333333333333333 # ---------+------+---------------------- # spam=Y | N | 0.0588235294117647 # spam=Y | Y | 0.941176470588235 # ---------+------+---------------------- # # category | morning | P( morning | category ) # ---------+---------+------------------------- # spam=N | N | 0.333333333333333 # spam=N | Y | 0.666666666666667 # ---------+---------+------------------------- # spam=Y | N | 0.647058823529412 # spam=Y | Y | 0.352941176470588 # ---------+---------+------------------------- # # category | size1 | P( size1 | category ) # ---------+-------+----------------------- # spam=N | L | 0.333333333333333 # spam=N | S | 0.666666666666667 # ---------+-------+----------------------- # spam=Y | L | 0.588235294117647 # spam=Y | S | 0.411764705882353 # ---------+-------+----------------------- # # ' Can't locate YAML.pm in @INC (@INC contains: /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/lib/AI/NaiveBayes1.pm line 375. # Looks like you planned 6 tests but only ran 2. # Looks like you failed 1 test of 2 run. # Looks like your test died just after 2. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 5/6 subtests t/3...... # Failed test in t/3.t at line 57. # got: 'Model: # category | P(category) # ---------+---------------------- # play=no | 0.357142857142857143 # play=yes | 0.642857142857142857 # ---------+---------------------- # # category | humidity | P( humidity | category ) # ---------+----------+-------------------------- # play=no | high | 0.8 # play=no | normal | 0.2 # ---------+----------+-------------------------- # play=yes | high | 0.333333333333333333 # play=yes | normal | 0.666666666666666667 # ---------+----------+-------------------------- # # category | outlook | P( outlook | category ) # ---------+----------+------------------------- # play=no | rainy | 0.4 # play=no | sunny | 0.6 # ---------+----------+------------------------- # play=yes | overcast | 0.444444444444444444 # play=yes | rainy | 0.333333333333333333 # play=yes | sunny | 0.222222222222222222 # ---------+----------+------------------------- # # category | temperature | P( temperature | category ) # ---------+-------------+----------------------------- # play=no | cool | 0.2 # play=no | hot | 0.4 # play=no | mild | 0.4 # ---------+-------------+----------------------------- # play=yes | cool | 0.333333333333333333 # play=yes | hot | 0.222222222222222222 # play=yes | mild | 0.444444444444444444 # ---------+-------------+----------------------------- # # category | windy | P( windy | category ) # ---------+-------+----------------------- # play=no | FALSE | 0.4 # play=no | TRUE | 0.6 # ---------+-------+----------------------- # play=yes | FALSE | 0.666666666666666667 # play=yes | TRUE | 0.333333333333333333 # ---------+-------+----------------------- # # ' # expected: 'Model: # category | P(category) # ---------+------------------- # play=no | 0.357142857142857 # play=yes | 0.642857142857143 # ---------+------------------- # # category | humidity | P( humidity | category ) # ---------+----------+-------------------------- # play=no | high | 0.8 # play=no | normal | 0.2 # ---------+----------+-------------------------- # play=yes | high | 0.333333333333333 # play=yes | normal | 0.666666666666667 # ---------+----------+-------------------------- # # category | outlook | P( outlook | category ) # ---------+----------+------------------------- # play=no | rainy | 0.4 # play=no | sunny | 0.6 # ---------+----------+------------------------- # play=yes | overcast | 0.444444444444444 # play=yes | rainy | 0.333333333333333 # play=yes | sunny | 0.222222222222222 # ---------+----------+------------------------- # # category | temperature | P( temperature | category ) # ---------+-------------+----------------------------- # play=no | cool | 0.2 # play=no | hot | 0.4 # play=no | mild | 0.4 # ---------+-------------+----------------------------- # play=yes | cool | 0.333333333333333 # play=yes | hot | 0.222222222222222 # play=yes | mild | 0.444444444444444 # ---------+-------------+----------------------------- # # category | windy | P( windy | category ) # ---------+-------+----------------------- # play=no | FALSE | 0.4 # play=no | TRUE | 0.6 # ---------+-------+----------------------- # play=yes | FALSE | 0.666666666666667 # play=yes | TRUE | 0.333333333333333 # ---------+-------+----------------------- # # ' Can't locate YAML.pm in @INC (@INC contains: /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/lib/AI/NaiveBayes1.pm line 375. # Looks like you planned 6 tests but only ran 2. # Looks like you failed 1 test of 2 run. # Looks like your test died just after 2. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 5/6 subtests t/4...... # Failed test in t/4.t at line 60. # got: 'Model: # category | P(category) # ---------+---------------------- # play=no | 0.357142857142857143 # play=yes | 0.642857142857142857 # ---------+---------------------- # # category | humidity | P( humidity | category ) # ---------+----------+--------------------------------------------------------------- # play=no | real | Gaussian(mean=86.2,stddev=9.73139250056229106) # ---------+----------+--------------------------------------------------------------- # play=yes | real | Gaussian(mean=79.1111111111111111,stddev=10.2157286138146363) # ---------+----------+--------------------------------------------------------------- # # category | outlook | P( outlook | category ) # ---------+----------+------------------------- # play=no | rainy | 0.4 # play=no | sunny | 0.6 # ---------+----------+------------------------- # play=yes | overcast | 0.444444444444444444 # play=yes | rainy | 0.333333333333333333 # play=yes | sunny | 0.222222222222222222 # ---------+----------+------------------------- # # category | temperature | P( temperature | category ) # ---------+-------------+------------------------------------------------ # play=no | real | Gaussian(mean=74.6,stddev=7.89303490426844622) # ---------+-------------+------------------------------------------------ # play=yes | real | Gaussian(mean=73,stddev=6.16441400296897645) # ---------+-------------+------------------------------------------------ # # category | windy | P( windy | category ) # ---------+-------+----------------------- # play=no | FALSE | 0.4 # play=no | TRUE | 0.6 # ---------+-------+----------------------- # play=yes | FALSE | 0.666666666666666667 # play=yes | TRUE | 0.333333333333333333 # ---------+-------+----------------------- # # ' # expected: 'Model: # category | P(category) # ---------+------------------- # play=no | 0.357142857142857 # play=yes | 0.642857142857143 # ---------+------------------- # # category | humidity | P( humidity | category ) # ---------+----------+--------------------------------------------------------- # play=no | real | Gaussian(mean=86.2,stddev=9.73139250056229) # ---------+----------+--------------------------------------------------------- # play=yes | real | Gaussian(mean=79.1111111111111,stddev=10.2157286138146) # ---------+----------+--------------------------------------------------------- # # category | outlook | P( outlook | category ) # ---------+----------+------------------------- # play=no | rainy | 0.4 # play=no | sunny | 0.6 # ---------+----------+------------------------- # play=yes | overcast | 0.444444444444444 # play=yes | rainy | 0.333333333333333 # play=yes | sunny | 0.222222222222222 # ---------+----------+------------------------- # # category | temperature | P( temperature | category ) # ---------+-------------+--------------------------------------------- # play=no | real | Gaussian(mean=74.6,stddev=7.89303490426845) # ---------+-------------+--------------------------------------------- # play=yes | real | Gaussian(mean=73,stddev=6.16441400296898) # ---------+-------------+--------------------------------------------- # # category | windy | P( windy | category ) # ---------+-------+----------------------- # play=no | FALSE | 0.4 # play=no | TRUE | 0.6 # ---------+-------+----------------------- # play=yes | FALSE | 0.666666666666667 # play=yes | TRUE | 0.333333333333333 # ---------+-------+----------------------- # # ' Can't locate YAML.pm in @INC (@INC contains: /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/lib/AI/NaiveBayes1.pm line 375. # Looks like you planned 6 tests but only ran 2. # Looks like you failed 1 test of 2 run. # Looks like your test died just after 2. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 5/6 subtests t/5...... # Failed test in t/5.t at line 66. # got: 'Model: # category | P(category) # ---------+------------- # spam=N | 0.15 # spam=Y | 0.85 # ---------+------------- # # category | html | P( html | category ) # ---------+------+----------------------- # spam=N | N | 0.666666666666666667 # spam=N | Y | 0.333333333333333333 # ---------+------+----------------------- # spam=Y | N | 0.0588235294117647059 # spam=Y | Y | 0.941176470588235294 # ---------+------+----------------------- # # category | morning | P( morning | category ) # ---------+---------+------------------------- # spam=N | N | 0.333333333333333333 # spam=N | Y | 0.666666666666666667 # ---------+---------+------------------------- # spam=Y | N | 0.647058823529411765 # spam=Y | Y | 0.352941176470588235 # ---------+---------+------------------------- # # category | size | P( size | category ) # ---------+------+--------------------------------------------------------------- # spam=N | real | Gaussian(mean=1443.33333333333333,stddev=1521.30777074638429) # ---------+------+--------------------------------------------------------------- # spam=Y | real | Gaussian(mean=2344.64705882352941,stddev=1397.40106721265203) # ---------+------+--------------------------------------------------------------- # # ' # expected: 'Model: # category | P(category) # ---------+------------- # spam=N | 0.15 # spam=Y | 0.85 # ---------+------------- # # category | html | P( html | category ) # ---------+------+---------------------- # spam=N | N | 0.666666666666667 # spam=N | Y | 0.333333333333333 # ---------+------+---------------------- # spam=Y | N | 0.0588235294117647 # spam=Y | Y | 0.941176470588235 # ---------+------+---------------------- # # category | morning | P( morning | category ) # ---------+---------+------------------------- # spam=N | N | 0.333333333333333 # spam=N | Y | 0.666666666666667 # ---------+---------+------------------------- # spam=Y | N | 0.647058823529412 # spam=Y | Y | 0.352941176470588 # ---------+---------+------------------------- # # category | size | P( size | category ) # ---------+------+--------------------------------------------------------- # spam=N | real | Gaussian(mean=1443.33333333333,stddev=1521.30777074638) # ---------+------+--------------------------------------------------------- # spam=Y | real | Gaussian(mean=2344.64705882353,stddev=1397.40106721265) # ---------+------+--------------------------------------------------------- # # ' Can't locate YAML.pm in @INC (@INC contains: /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/lib/AI/NaiveBayes1.pm line 368. # Looks like you planned 6 tests but only ran 2. # Looks like you failed 1 test of 2 run. # Looks like your test died just after 2. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 5/6 subtests t/6...... # Failed test in t/6.t at line 24. # got: 'Model: # category | P(category) # ---------+------------- # S=Y | 0.38 # S=N | 0.62 # ---------+------------- # # category | C | P( C | category ) # ---------+---+---------------------- # S=Y | N | 0.368421052631578947 # S=Y | Y | 0.631578947368421053 # ---------+---+---------------------- # S=N | N | 0.79032258064516129 # S=N | Y | 0.20967741935483871 # ---------+---+---------------------- # # category | F | P( F | category ) # ---------+---+---------------------- # S=Y | 0 | 0.315789473684210526 # S=Y | 2 | 0.684210526315789474 # ---------+---+---------------------- # S=N | 0 | 0.806451612903225806 # S=N | 2 | 0.193548387096774194 # ---------+---+---------------------- # # ' # expected: 'Model: # category | P(category) # ---------+------------- # S=Y | 0.38 # S=N | 0.62 # ---------+------------- # # category | C | P( C | category ) # ---------+---+------------------- # S=Y | N | 0.368421052631579 # S=Y | Y | 0.631578947368421 # ---------+---+------------------- # S=N | N | 0.790322580645161 # S=N | Y | 0.209677419354839 # ---------+---+------------------- # # category | F | P( F | category ) # ---------+---+------------------- # S=Y | 0 | 0.315789473684211 # S=Y | 2 | 0.684210526315789 # ---------+---+------------------- # S=N | 0 | 0.806451612903226 # S=N | 2 | 0.193548387096774 # ---------+---+------------------- # # ' Can't locate YAML.pm in @INC (@INC contains: /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/lib/AI/NaiveBayes1.pm line 375. # Looks like you planned 9 tests but only ran 2. # Looks like you failed 1 test of 2 run. # Looks like your test died just after 2. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 8/9 subtests t/7...... # Failed test in t/7.t at line 24. # got: 'Model: # category | P(category) # ---------+------------- # S=Y | 0.38 # S=N | 0.62 # ---------+------------- # # category | C | P( C | category ) # ---------+---+---------------------- # S=Y | N | 0.368421052631578947 # S=Y | Y | 0.631578947368421053 # ---------+---+---------------------- # S=N | N | 0.79032258064516129 # S=N | Y | 0.20967741935483871 # ---------+---+---------------------- # # category | F | P( F | category ) # ---------+---+---------------------- # S=Y | 0 | 0.315789473684210526 # S=Y | 2 | 0.684210526315789474 # ---------+---+---------------------- # S=N | 0 | 0.806451612903225806 # S=N | 2 | 0.193548387096774194 # ---------+---+---------------------- # # ' # expected: 'Model: # category | P(category) # ---------+------------- # S=Y | 0.38 # S=N | 0.62 # ---------+------------- # # category | C | P( C | category ) # ---------+---+------------------- # S=Y | N | 0.368421052631579 # S=Y | Y | 0.631578947368421 # ---------+---+------------------- # S=N | N | 0.790322580645161 # S=N | Y | 0.209677419354839 # ---------+---+------------------- # # category | F | P( F | category ) # ---------+---+------------------- # S=Y | 0 | 0.315789473684211 # S=Y | 2 | 0.684210526315789 # ---------+---+------------------- # S=N | 0 | 0.806451612903226 # S=N | 2 | 0.193548387096774 # ---------+---+------------------- # # ' Can't locate YAML.pm in @INC (@INC contains: /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/lib/AI/NaiveBayes1.pm line 375. # Looks like you planned 12 tests but only ran 2. # Looks like you failed 1 test of 2 run. # Looks like your test died just after 2. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 11/12 subtests t/8......Can't locate YAML.pm in @INC (@INC contains: /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at t/8.t line 48. BEGIN failed--compilation aborted at t/8.t line 48. # Looks like your test died before it could output anything. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 2/2 subtests Test Summary Report ------------------- t/1.t (Wstat: 65280 Tests: 2 Failed: 1) Failed test number(s): 2 Non-zero exit status: 255 Parse errors: Bad plan. You planned 4 tests but ran 2. t/2.t (Wstat: 65280 Tests: 2 Failed: 1) Failed test number(s): 2 Non-zero exit status: 255 Parse errors: Bad plan. You planned 6 tests but ran 2. t/3.t (Wstat: 65280 Tests: 2 Failed: 1) Failed test number(s): 2 Non-zero exit status: 255 Parse errors: Bad plan. You planned 6 tests but ran 2. t/4.t (Wstat: 65280 Tests: 2 Failed: 1) Failed test number(s): 2 Non-zero exit status: 255 Parse errors: Bad plan. You planned 6 tests but ran 2. t/5.t (Wstat: 65280 Tests: 2 Failed: 1) Failed test number(s): 2 Non-zero exit status: 255 Parse errors: Bad plan. You planned 6 tests but ran 2. t/6.t (Wstat: 65280 Tests: 2 Failed: 1) Failed test number(s): 2 Non-zero exit status: 255 Parse errors: Bad plan. You planned 9 tests but ran 2. t/7.t (Wstat: 65280 Tests: 2 Failed: 1) Failed test number(s): 2 Non-zero exit status: 255 Parse errors: Bad plan. You planned 12 tests but ran 2. t/8.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 2 tests but ran 0. Files=8, Tests=14, 3 wallclock secs ( 0.03 usr 0.27 sys + 0.70 cusr 0.30 csys = 1.30 CPU) Result: FAIL Failed 8/8 test programs. 7/14 subtests failed. make: *** [test_dynamic] Error 255 [MSG] [Tue Dec 11 01:35:30 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: YAML As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'VLADO ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'YAML' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 LANG = en_GB.UTF-8 PATH = /usr/local/bin:/bin:/usr/bin:/usr/X11/bin PERL5LIB = :/home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/lib:/home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib/arch:/home/cpan/perl588/.cpanplus/5.8.8/build/AI-NaiveBayes1-1.3/blib PERL5_CPANPLUS_IS_RUNNING = 7581 PERL5_CPANPLUS_IS_VERSION = 0.83_08 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen.linux Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cpan/perl588/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 100 100 EGID: $) = 100 100 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.16.38, archname=i686-linux-thread-multi-64int-ld uname='linux scratch 2.6.16.38 #1 preempt thu feb 22 16:04:10 gmt 2007 i686 athlon-4 i386 gnulinux ' config_args='-e' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='4.0.3', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
