This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear ASPINDLER, This is a computer-generated error report created automatically by CPANPLUS, version 0.82. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sat Dec 15 04:39:40 2007] Trying to get 'http://www.cpan.org/authors/id/A/AS/ASPINDLER/CHECKSUMS' [MSG] [Sat Dec 15 04:39:41 2007] Archive size is not known for 'Data-Rlist-1.35.tar.gz' [MSG] [Sat Dec 15 04:39:41 2007] No 'md5' checksum known for 'Data-Rlist-1.35.tar.gz' [MSG] [Sat Dec 15 04:39:42 2007] Extracted 'Data-Rlist-1.35/' [MSG] [Sat Dec 15 04:39:42 2007] Extracted 'Data-Rlist-1.35/MANIFEST' [MSG] [Sat Dec 15 04:39:42 2007] Extracted 'Data-Rlist-1.35/lib/' [MSG] [Sat Dec 15 04:39:42 2007] Extracted 'Data-Rlist-1.35/lib/Data/' [MSG] [Sat Dec 15 04:39:42 2007] Extracted 'Data-Rlist-1.35/lib/Data/Rlist.pm' [MSG] [Sat Dec 15 04:39:42 2007] Extracted 'Data-Rlist-1.35/t/' [MSG] [Sat Dec 15 04:39:42 2007] Extracted 'Data-Rlist-1.35/t/Data-Rlist.t' [MSG] [Sat Dec 15 04:39:42 2007] Extracted 'Data-Rlist-1.35/Changes' [MSG] [Sat Dec 15 04:39:42 2007] Extracted 'Data-Rlist-1.35/README' [MSG] [Sat Dec 15 04:39:42 2007] Extracted 'Data-Rlist-1.35/Makefile.PL' [MSG] [Sat Dec 15 04:39:42 2007] Extracted 'Data-Rlist-1.35/META.yml' [MSG] [Sat Dec 15 04:39:42 2007] Extracted 'Data::Rlist' to '/Volumes/Media/smoke/perl583/.cpanplus/5.8.3/build/Data-Rlist-1.35' [MSG] [Sat Dec 15 04:39:45 2007] perl thinks the current OS is 'darwin' Checking if your kit is complete... Looks good Writing Makefile for Data::Rlist [MSG] [Sat Dec 15 04:39:45 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sat Dec 15 04:39:50 2007] cp lib/Data/Rlist.pm blib/lib/Data/Rlist.pm Manifying blib/man3/Data::Rlist.3 [ERROR] [Sat Dec 15 04:39:52 2007] MAKE TEST failed: PERL_DL_NONLAZY=1 /Volumes/Media/smoke/perl583/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/Data-Rlist....# Failed test 20 in t/Data-Rlist.t at line 80 # t/Data-Rlist.t line 80 is: ok(defined $test1file); # Failed test 21 in t/Data-Rlist.t at line 81 # t/Data-Rlist.t line 81 is: ok(defined $test2file); FAILED tests 20-21 Failed 2/30 tests, 93.33% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/Data-Rlist.t 30 2 20-21 Failed 1/1 test scripts. 2/30 subtests failed. Files=1, Tests=30, 1 wallclock secs ( 0.29 cusr + 0.09 csys = 0.38 CPU) Failed 1/1 test programs. 2/30 subtests failed. [MSG] [Sat Dec 15 04:39:52 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin PERL5LIB = :/Volumes/Media/smoke/perl583/.cpanplus/5.8.3/build/Data-Rlist-1.35/blib/lib:/Volumes/Media/smoke/perl583/.cpanplus/5.8.3/build/Data-Rlist-1.35/blib/arch:/Volumes/Media/smoke/perl583/.cpanplus/5.8.3/build/Data-Rlist-1.35/blib PERL5_CPANPLUS_IS_RUNNING = 13822 PERL5_CPANPLUS_IS_VERSION = 0.82 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /Volumes/Media/smoke/perl583/bin/perl UID: $< = 502 EUID: $> = 502 GID: $( = 502 502 EGID: $) = 502 502 ------------------------------- -- Summary of my perl5 (revision 5.0 version 8 subversion 3) configuration: Platform: osname=darwin, osvers=8.10.0, archname=darwin-thread-multi-2level uname='darwin afalglas.bingosnet.co.uk 8.10.0 darwin kernel version 8.10.0: wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc power macintosh powerpc ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include', optimize='-O3', cppflags='-no-cpp-precomp -pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include' ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /usr/lib libs=-ldbm -ldl -lm -lc perllibs=-ldl -lm -lc libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dyld.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' ' cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup -L/usr/local/lib'
