This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear TMTM, This is a computer-generated error report created automatically by CPANPLUS, version 0.83_09. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sat Dec 15 21:06:55 2007] Trying to get 'http://www.cpan.org/authors/id/T/TM/TMTM/Spreadsheet-Engine-0.03.tar.gz' [MSG] [Sat Dec 15 21:06:59 2007] Trying to get 'http://www.cpan.org/authors/id/T/TM/TMTM/CHECKSUMS' [MSG] [Sat Dec 15 21:07:00 2007] Checksum matches for 'Spreadsheet-Engine-0.03.tar.gz' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/t/' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/t/data/' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/t/data/stringfns.txt' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/t/99-podc.t' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/t/circular.t' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/t/98-pod.t' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/t/copypaste.t' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/t/dsum.t' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/t/stringfns.t' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/t/commands.t' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/t/formatting.t' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/t/header.t' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/lib/' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/lib/Spreadsheet/' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/lib/Spreadsheet/Engine/' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/lib/Spreadsheet/Engine/Functions.pm' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/lib/Spreadsheet/Engine/Sheet.pm' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/lib/Spreadsheet/Engine/Storage/' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/lib/Spreadsheet/Engine/Storage/SocialCalc.pm' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/lib/Spreadsheet/Engine.pm' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/README' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/MANIFEST.SKIP' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/Makefile.PL' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/LICENSE.txt' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/META.yml' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/CHANGES' [MSG] [Sat Dec 15 21:07:01 2007] Extracted 'Spreadsheet-Engine-0.03/MANIFEST' [MSG] [Sat Dec 15 21:07:02 2007] Extracted 'Spreadsheet::Engine' to '/home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/Spreadsheet-Engine-0.03' [MSG] [Sat Dec 15 21:07:04 2007] Checking if your kit is complete... Looks good Writing Makefile for Spreadsheet::Engine [MSG] [Sat Dec 15 21:07:04 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sat Dec 15 21:07:16 2007] cp lib/Spreadsheet/Engine/Functions.pm blib/lib/Spreadsheet/Engine/Functions.pm cp lib/Spreadsheet/Engine/Storage/SocialCalc.pm blib/lib/Spreadsheet/Engine/Storage/SocialCalc.pm cp lib/Spreadsheet/Engine.pm blib/lib/Spreadsheet/Engine.pm cp lib/Spreadsheet/Engine/Sheet.pm blib/lib/Spreadsheet/Engine/Sheet.pm [ERROR] [Sat Dec 15 21:07:25 2007] MAKE TEST failed: Illegal seek /home/cwill1is/perl5.10.0/bin/perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/98-pod..........skipped: Test::Pod 1.00 required for testing POD t/99-podc.........skipped: Test::Pod::Coverage required for testing POD t/circular........ok t/commands........ok t/copypaste.......ok t/dsum............ok t/formatting...... Dubious, test returned 255 (wstat 65280, 0xff00) Failed 12/12 subtests Can't use string ("2/8") as a HASH ref while "strict refs" in use at lib/Spreadsheet/Engine/Sheet.pm line 3237. # Looks like your test died before it could output anything. t/header..........ok t/stringfns.......ok Test Summary Report ------------------- t/formatting.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 12 tests but ran 0. Files=9, Tests=25, 5 wallclock secs ( 0.11 usr 0.09 sys + 2.93 cusr 1.70 csys = 4.83 CPU) Result: FAIL Failed 1/9 test programs. 0/25 subtests failed. make: *** [test_dynamic] Error 255 [MSG] [Sat Dec 15 21:07:25 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 COMSPEC = C:\WINDOWS\system32\cmd.exe INCLUDE = ;C:\strawberry-perl\mingw\include;C:\strawberry-perl\perl\lib\CORE;C:\strawberry-perl\perl\lib\encode LIB = ;C:\strawberry-perl\mingw\lib;C:\strawberry-perl\perl\bin NUMBER_OF_PROCESSORS = 1 PATH = /usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/cygdrive/c/GNUWin32/bin:/cygdrive/c/strawberry-perl/perl/bin:/cygdrive/c/Program Files/Support Tools/:/cygdrive/c/Mingw/dmake:/cygdrive/c/Mingw/bin:/cygdrive/c/Mingw/tools:/cygdrive/c/Perl/bin/:/cygdrive/c/WINDOWS/system32:/cygdrive/c/WINDOWS:/cygdrive/c/WINDOWS/System32/Wbem:/cygdrive/c/Program Files/Microsoft SQL Server/80/Tools/BINN://scc030/helpdeskv6$/HelpDesk/HDBIN32/:/cygdrive/c/Program Files/Vim/vim63:/cygdrive/c/Program Files/QuickTime/QTSystem/:/cygdrive/c/Program Files/Subversion/bin:/cygdrive/c/strawberry-perl/perl/bin:/cygdrive/c/strawberry-perl/dmake/bin:/cygdrive/c/strawberry-perl/mingw/bin:/cygdrive/c/WINDOWS/system32/WindowsPowerShell/v1.0:/cygdrive/c/Program Files/SSH Communications Security/SSH Secure Shell:/cygdrive/c/Program Files/Nmap PERL5LIB = :/home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/Spreadsheet-Engine-0.03/blib/lib:/home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/Spreadsheet-Engine-0.03/blib/arch:/home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/Spreadsheet-Engine-0.03/blib PERL5_CPANPLUS_IS_RUNNING = 24380 PERL5_CPANPLUS_IS_VERSION = 0.83_09 PERL_MM_USE_DEFAULT = 1 PROCESSOR_IDENTIFIER = x86 Family 15 Model 1 Stepping 2, GenuineIntel SHELL = /bin/sh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cwill1is/perl5.10.0/bin/perl.exe UID: $< = 11964 EUID: $> = 11964 GID: $( = 10513 544 545 1003 1026 10512 10513 35917 10519 12222 51275 47366 11814 11812 11265 14694 13857 44594 44599 19834 18930 49232 47137 46503 EGID: $) = 10513 544 545 1003 1026 10512 10513 35917 10519 12222 51275 47366 11814 11812 11265 14694 13857 44594 44599 19834 18930 49232 47137 46503 ------------------------------- -- Summary of my perl5 (revision 5 version 10 subversion 0) configuration: Platform: osname=cygwin, osvers=1.5.24(0.15642), archname=cygwin-thread-multi-64int uname='cygwin_nt-5.2 citu003 1.5.24(0.15642) 2007-01-31 10:57 i686 cygwin ' config_args='-e -Dprefix=/home/cwill1is/perl5.10.0 -Dusethreads -Duse64bitint -Dusemymalloc' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-DPERL_USE_SAFE_PUTENV -U__STRICT_ANSI__ -fno-strict-aliasing -pipe -I/usr/local/include', optimize='-O2', cppflags='-DPERL_USE_SAFE_PUTENV -U__STRICT_ANSI__ -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='3.4.4 (cygming special, gdc 0.12, using dmd 0.125)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='g++', ldflags =' -Wl,--enable-auto-import -Wl,--export-all-symbols -Wl,--stack,8388608 -Wl,--enable-auto-image-base -Wl,--enable-auto-import -L/usr/local/lib' libpth=/usr/local/lib /usr/lib /lib libs=-lgdbm -ldb -ldl -lcrypt -lgdbm_compat perllibs=-ldl -lcrypt -lgdbm_compat libc=/usr/lib/libc.a, so=dll, useshrplib=true, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' -s' cccdlflags=' ', lddlflags=' --shared -Wl,--enable-auto-import -Wl,--export-all-symbols -Wl,--stack,8388608 -Wl,--enable-auto-image-base -Wl,--enable-auto-import -L/usr/local/lib'
