This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear GRAHAMC, This is a computer-generated error report created automatically by CPANPLUS, version 0.82. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Mon Dec 17 01:23:57 2007] Trying to get 'http://www.cpan.org/authors/id/G/GR/GRAHAMC/CHECKSUMS' [MSG] [Mon Dec 17 01:23:58 2007] Checksum matches for 'Geo-Coordinates-UTM-0.07.tar.gz' [MSG] [Mon Dec 17 01:23:58 2007] Extracted 'Geo-Coordinates-UTM-0.07/' [MSG] [Mon Dec 17 01:23:58 2007] Extracted 'Geo-Coordinates-UTM-0.07/Changes' [MSG] [Mon Dec 17 01:23:58 2007] Extracted 'Geo-Coordinates-UTM-0.07/t/' [MSG] [Mon Dec 17 01:23:58 2007] Extracted 'Geo-Coordinates-UTM-0.07/t/02_points.t' [MSG] [Mon Dec 17 01:23:58 2007] Extracted 'Geo-Coordinates-UTM-0.07/t/01_basic_settings.t' [MSG] [Mon Dec 17 01:23:58 2007] Extracted 'Geo-Coordinates-UTM-0.07/README' [MSG] [Mon Dec 17 01:23:58 2007] Extracted 'Geo-Coordinates-UTM-0.07/MANIFEST' [MSG] [Mon Dec 17 01:23:58 2007] Extracted 'Geo-Coordinates-UTM-0.07/Makefile.PL' [MSG] [Mon Dec 17 01:23:58 2007] Extracted 'Geo-Coordinates-UTM-0.07/UTM.pm' [MSG] [Mon Dec 17 01:23:58 2007] Extracted 'Geo-Coordinates-UTM-0.07/META.yml' [MSG] [Mon Dec 17 01:23:58 2007] Extracted 'Geo::Coordinates::UTM' to '/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Geo-Coordinates-UTM-0.07' [MSG] [Mon Dec 17 01:23:59 2007] Checking if your kit is complete... Looks good Writing Makefile for Geo::Coordinates::UTM [MSG] [Mon Dec 17 01:23:59 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Dec 17 01:24:02 2007] cp UTM.pm blib/lib/Geo/Coordinates/UTM.pm Manifying blib/man3/Geo::Coordinates::UTM.3 [ERROR] [Mon Dec 17 01:24:25 2007] MAKE TEST failed: PERL_DL_NONLAZY=1 /Volumes/Media/smoke/perl562/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/01_basic_settings....ok t/02_points............ # Failed test 'fz longitude (zone 60J) 2' # at t/02_points.t line 16. # floating point value 1784763805.8408 too different to reference 176.847283481794 # Failed test 'fz latitude (zone 60J) 2' # at t/02_points.t line 16. # floating point value -26873996302.6418 too different to reference -25.9668774017417 # Failed test 'fz longitude (zone 59P) 83' # at t/02_points.t line 16. # floating point value 8.61448740045506e+16 too different to reference 173.009499976332 # Failed test 'fz latitude (zone 59P) 83' # at t/02_points.t line 16. # floating point value 8.96469375400747e+18 too different to reference 10.7456100701673 # Failed test 'fz longitude (zone 60H) 223' # at t/02_points.t line 16. # floating point value 29696459666.1867 too different to reference 174.953950987426 # Failed test 'fz latitude (zone 60H) 223' # at t/02_points.t line 16. # floating point value -505880950687.311 too different to reference -32.7058399004368 # Failed test 'fz longitude (zone 59J) 238' # at t/02_points.t line 16. # floating point value -1656370830.91639 too different to reference 173.118835166358 # Failed test 'fz latitude (zone 59J) 238' # at t/02_points.t line 16. # floating point value 28613399935.0151 too different to reference -31.9234244312324 # Failed test 'fz longitude (zone 60C) 273' # at t/02_points.t line 16. # floating point value 563219.753251431 too different to reference 178.530333926786 # Failed test 'fz latitude (zone 60C) 273' # at t/02_points.t line 16. # floating point value 1437091.2930034 too different to reference -76.6120600397079 # Failed test 'fz longitude (zone 1J) 408' # at t/02_points.t line 16. # floating point value -20075437.2020298 too different to reference -179.490858873814 # Failed test 'fz latitude (zone 1J) 408' # at t/02_points.t line 16. # floating point value -111981715.311126 too different to reference -30.70120357214 # Failed test 'fz longitude (zone 1K) 629' # at t/02_points.t line 16. # floating point value -1.7874419249505e+16 too different to reference -178.027089960346 # Failed test 'fz latitude (zone 1K) 629' # at t/02_points.t line 16. # floating point value -8.29792550320017e+17 too different to reference -21.7374795357266 # Failed test 'fz longitude (zone 59K) 721' # at t/02_points.t line 16. # floating point value -237649713233.003 too different to reference 170.41270562919 # Failed test 'fz latitude (zone 59K) 721' # at t/02_points.t line 16. # floating point value -13084428793140.3 too different to reference -22.6288991538721 # Failed test 'fz longitude (zone 59W) 739' # at t/02_points.t line 16. # floating point value -1186197166.96684 too different to reference 172.920171351635 # Failed test 'fz latitude (zone 59W) 739' # at t/02_points.t line 16. # floating point value -22902459578.7256 too different to reference 68.4100151885887 # Failed test 'fz longitude (zone 60H) 769' # at t/02_points.t line 16. # floating point value -17367893068.4693 too different to reference 177.82816444711 # Failed test 'fz latitude (zone 60H) 769' # at t/02_points.t line 16. # floating point value -529566815316.76 too different to reference -35.2932053173919 # Failed test 'fz longitude (zone 1S) 822' # at t/02_points.t line 16. # floating point value -3318716094675.71 too different to reference -176.036941916601 # Failed test 'fz latitude (zone 1S) 822' # at t/02_points.t line 16. # floating point value -160692379128067 too different to reference 39.6262193018376 # Failed test 'fz longitude (zone 1K) 833' # at t/02_points.t line 16. # floating point value -200114663401495 too different to reference -174.197788153224 # Failed test 'fz latitude (zone 1K) 833' # at t/02_points.t line 16. # floating point value -1.7216198771555e+16 too different to reference -16.2686031840395 # Failed test 'fz longitude (zone 60U) 884' # at t/02_points.t line 16. # floating point value 5.66103304016909e+15 too different to reference 175.293568765728 # Failed test 'fz latitude (zone 60U) 884' # at t/02_points.t line 16. # floating point value 2.58922968182948e+17 too different to reference 51.8498991358998 # Failed test 'fz longitude (zone 59V) 912' # at t/02_points.t line 16. # floating point value -515477189466.47 too different to reference 171.061522099043 # Failed test 'fz latitude (zone 59V) 912' # at t/02_points.t line 16. # floating point value -25208944181736.3 too different to reference 56.3836532184208 # Looks like you failed 28 tests of 9991. dubious Test returned status 28 (wstat 7168, 0x1c00) DIED. FAILED tests 10-11, 820-821, 2220-2221, 2370-2371, 2720-2721, 4070-4071, 6280-6281, 7200-7201, 7380-7381, 7680-7681, 8210-8211, 8320-8321, 8830-8831, 9110-9111 Failed 28/9991 tests, 99.72% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/02_points.t 28 7168 9991 28 10-11 820-821 2220-2221 2370-2371 2720- 2721 4070-4071 6280-6281 7200-7201 7380- 7381 7680-7681 8210-8211 8320-8321 8830- 8831 9110-9111 Failed 1/2 test scripts. 28/9994 subtests failed. Files=2, Tests=9994, 23 wallclock secs (11.44 cusr + 0.69 csys = 12.13 CPU) Failed 1/2 test programs. 28/9994 subtests failed. [MSG] [Mon Dec 17 01:24:26 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 3.07e-02. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin PERL5LIB = :/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Geo-Coordinates-UTM-0.07/blib/lib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Geo-Coordinates-UTM-0.07/blib/arch:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Geo-Coordinates-UTM-0.07/blib PERL5_CPANPLUS_IS_EXECUTING = PERL5_CPANPLUS_IS_RUNNING = 1035 PERL5_CPANPLUS_IS_VERSION = 0.82 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /Volumes/Media/smoke/perl562/bin/perl UID: $< = 502 EUID: $> = 502 GID: $( = 502 502 EGID: $) = 502 502 ------------------------------- -- Summary of my perl5 (revision 5.0 version 6 subversion 2) configuration: Platform: osname=darwin, osvers=8.10.0, archname=darwin-thread-multi uname='darwin bingos-power-mac-g4-agp-graphics.local 8.10.0 darwin kernel version 8.10.0: wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc power macintosh powerpc ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef Compiler: cc='cc', ccflags ='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include', optimize='-O3', cppflags='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include' ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, usemymalloc=n, prototype=define Linker and Libraries: ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /usr/lib libs=-ldbm -ldl -lm -lc perllibs=-ldl -lm -lc libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a Dynamic Linking: dlsrc=dl_dyld.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' ' cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup -L/usr/local/lib'
