This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear GRAHAMC,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.82. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Mon Dec 17 01:26:55 2007] Trying to get 
'http://www.cpan.org/authors/id/G/GR/GRAHAMC/CHECKSUMS'
[MSG] [Mon Dec 17 01:26:56 2007] Checksum matches for 
'Geo-Coordinates-UTM-0.07.tar.gz'
[MSG] [Mon Dec 17 01:26:57 2007] Extracted 'Geo-Coordinates-UTM-0.07/'
[MSG] [Mon Dec 17 01:26:57 2007] Extracted 'Geo-Coordinates-UTM-0.07/Changes'
[MSG] [Mon Dec 17 01:26:57 2007] Extracted 'Geo-Coordinates-UTM-0.07/t/'
[MSG] [Mon Dec 17 01:26:57 2007] Extracted 
'Geo-Coordinates-UTM-0.07/t/02_points.t'
[MSG] [Mon Dec 17 01:26:57 2007] Extracted 
'Geo-Coordinates-UTM-0.07/t/01_basic_settings.t'
[MSG] [Mon Dec 17 01:26:57 2007] Extracted 'Geo-Coordinates-UTM-0.07/README'
[MSG] [Mon Dec 17 01:26:57 2007] Extracted 'Geo-Coordinates-UTM-0.07/MANIFEST'
[MSG] [Mon Dec 17 01:26:57 2007] Extracted 
'Geo-Coordinates-UTM-0.07/Makefile.PL'
[MSG] [Mon Dec 17 01:26:57 2007] Extracted 'Geo-Coordinates-UTM-0.07/UTM.pm'
[MSG] [Mon Dec 17 01:26:57 2007] Extracted 'Geo-Coordinates-UTM-0.07/META.yml'
[MSG] [Mon Dec 17 01:26:57 2007] Extracted 'Geo::Coordinates::UTM' to 
'/Volumes/Media/smoke/perl584/.cpanplus/5.8.4/build/Geo-Coordinates-UTM-0.07'
[MSG] [Mon Dec 17 01:26:58 2007] Checking if your kit is complete...
Looks good
Writing Makefile for Geo::Coordinates::UTM

[MSG] [Mon Dec 17 01:26:58 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Mon Dec 17 01:27:01 2007] cp UTM.pm blib/lib/Geo/Coordinates/UTM.pm
Manifying blib/man3/Geo::Coordinates::UTM.3

[ERROR] [Mon Dec 17 01:27:26 2007] MAKE TEST failed:  PERL_DL_NONLAZY=1 
/Volumes/Media/smoke/perl584/bin/perl "-MExtUtils::Command::MM" "-e" 
"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01_basic_settings....ok
t/02_points............
#   Failed test 'fz longitude (zone 60N) 86'
#   at t/02_points.t line 16.
# floating point value 2.76623362878106e+15 too different to reference 
174.654184750992

#   Failed test 'fz latitude (zone 60N) 86'
#   at t/02_points.t line 16.
# floating point value -3.64355915750402e+17 too different to reference 
0.173063552093197

#   Failed test 'fz longitude (zone 59V) 101'
#   at t/02_points.t line 16.
# floating point value -17958290518.9802 too different to reference 
169.461688394098

#   Failed test 'fz latitude (zone 59V) 101'
#   at t/02_points.t line 16.
# floating point value -561459599766.965 too different to reference 
63.6032565144119

#   Failed test 'fz longitude (zone 60H) 223'
#   at t/02_points.t line 16.
# floating point value 29696459666.1867 too different to reference 
174.953950987426

#   Failed test 'fz latitude (zone 60H) 223'
#   at t/02_points.t line 16.
# floating point value -505880950687.311 too different to reference 
-32.7058399004368

#   Failed test 'fz longitude (zone 1N) 229'
#   at t/02_points.t line 16.
# floating point value -276859223864640 too different to reference 
-174.161351096588

#   Failed test 'fz latitude (zone 1N) 229'
#   at t/02_points.t line 16.
# floating point value 4.55367511029864e+16 too different to reference 
4.91799601358203

#   Failed test 'fz longitude (zone 1G) 293'
#   at t/02_points.t line 16.
# floating point value 736772512133.678 too different to reference 
-179.11990259409

#   Failed test 'fz latitude (zone 1G) 293'
#   at t/02_points.t line 16.
# floating point value -56673505613367.3 too different to reference 
-44.7032654610135

#   Failed test 'fz longitude (zone 1J) 408'
#   at t/02_points.t line 16.
# floating point value -20075437.2020298 too different to reference 
-179.490858873814

#   Failed test 'fz latitude (zone 1J) 408'
#   at t/02_points.t line 16.
# floating point value -111981715.311126 too different to reference 
-30.70120357214

#   Failed test 'fz longitude (zone 59N) 542'
#   at t/02_points.t line 16.
# floating point value -13817067412094.6 too different to reference 
168.503947958448

#   Failed test 'fz latitude (zone 59N) 542'
#   at t/02_points.t line 16.
# floating point value 1.1878325944822e+15 too different to reference 
7.04533528057556

#   Failed test 'fz longitude (zone 60N) 609'
#   at t/02_points.t line 16.
# floating point value 47751959001845.9 too different to reference 
174.81595471932

#   Failed test 'fz latitude (zone 60N) 609'
#   at t/02_points.t line 16.
# floating point value 8.53275600844402e+15 too different to reference 
3.54293898179039

#   Failed test 'fz longitude (zone 1J) 676'
#   at t/02_points.t line 16.
# floating point value -1501872063.38683 too different to reference 
-179.637259783815

#   Failed test 'fz latitude (zone 1J) 676'
#   at t/02_points.t line 16.
# floating point value 2381537166.86413 too different to reference 
-26.3045496152241

#   Failed test 'fz longitude (zone 60R) 790'
#   at t/02_points.t line 16.
# floating point value -1071889466.13067 too different to reference 
179.525452314159

#   Failed test 'fz latitude (zone 60R) 790'
#   at t/02_points.t line 16.
# floating point value -12072463790.2687 too different to reference 
30.9984249356909

#   Failed test 'fz longitude (zone 1S) 822'
#   at t/02_points.t line 16.
# floating point value -3318716094675.71 too different to reference 
-176.036941916601

#   Failed test 'fz latitude (zone 1S) 822'
#   at t/02_points.t line 16.
# floating point value -160692379128067 too different to reference 
39.6262193018376

#   Failed test 'fz longitude (zone 1C) 878'
#   at t/02_points.t line 16.
# floating point value 7878534.68742959 too different to reference 
-178.158104283004

#   Failed test 'fz latitude (zone 1C) 878'
#   at t/02_points.t line 16.
# floating point value 33748412.7966994 too different to reference 
-75.2950782667526

#   Failed test 'fz longitude (zone 1Q) 938'
#   at t/02_points.t line 16.
# floating point value -9.18596158497168e+15 too different to reference 
-175.62673930873

#   Failed test 'fz latitude (zone 1Q) 938'
#   at t/02_points.t line 16.
# floating point value 6.47784607887517e+17 too different to reference 
17.724839026044
# Looks like you failed 26 tests of 9991.
dubious
        Test returned status 26 (wstat 6656, 0x1a00)
DIED. FAILED tests 850-851, 1000-1001, 2220-2221, 2280-2281, 2920-2921, 
4070-4071, 5410-5411, 6080-6081, 6750-6751, 7890-7891, 8210-8211, 8770-8771, 
9370-9371
        Failed 26/9991 tests, 99.74% okay
Failed Test   Stat Wstat Total Fail  List of Failed
-------------------------------------------------------------------------------
t/02_points.t   26  6656  9991   26  850-851 1000-1001 2220-2221 2280-2281
                                     2920-2921 4070-4071 5410-5411 6080-6081
                                     6750-6751 7890-7891 8210-8211 8770-8771
                                     9370-9371
Failed 1/2 test scripts. 26/9994 subtests failed.
Files=2, Tests=9994, 24 wallclock secs (12.39 cusr +  0.72 csys = 13.11 CPU)
Failed 1/2 test programs. 26/9994 subtests failed.

[MSG] [Mon Dec 17 01:27:26 2007] DEFAULT 'proceed_on_test_failure' HANDLER 
RETURNING 'sub return value'


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin
    PERL5LIB = 
:/Volumes/Media/smoke/perl584/.cpanplus/5.8.4/build/Geo-Coordinates-UTM-0.07/blib/lib:/Volumes/Media/smoke/perl584/.cpanplus/5.8.4/build/Geo-Coordinates-UTM-0.07/blib/arch:/Volumes/Media/smoke/perl584/.cpanplus/5.8.4/build/Geo-Coordinates-UTM-0.07/blib
    PERL5_CPANPLUS_IS_RUNNING = 1248
    PERL5_CPANPLUS_IS_VERSION = 0.82
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /Volumes/Media/smoke/perl584/bin/perl
    UID:  $<  = 502
    EUID: $>  = 502
    GID:  $(  = 502 502
    EGID: $)  = 502 502


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 4) configuration:
  Platform:
    osname=darwin, osvers=8.10.0, archname=darwin-thread-multi-2level
    uname='darwin afalglas.bingosnet.co.uk 8.10.0 darwin kernel version 8.10.0: 
wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc power macintosh 
powerpc '
    config_args=''
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define 
usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp 
-fno-strict-aliasing -I/usr/local/include',
    optimize='-O3',
    cppflags='-no-cpp-precomp -pipe -fno-common -DPERL_DARWIN -no-cpp-precomp 
-fno-strict-aliasing -I/usr/local/include'
    ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)', 
gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', 
lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib
    libs=-ldbm -ldl -lm -lc
    perllibs=-ldl -lm -lc
    libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dyld.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
    cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup 
-L/usr/local/lib'

Reply via email to