This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear VLADO, This is a computer-generated error report created automatically by CPANPLUS, version 0.83_09. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Wed Dec 19 19:52:18 2007] Trying to get 'http://www.cpan.org/authors/id/V/VL/VLADO/AI-NaiveBayes1-1.3.tar.gz' [MSG] [Wed Dec 19 19:52:23 2007] Trying to get 'http://www.cpan.org/authors/id/V/VL/VLADO/CHECKSUMS' [MSG] [Wed Dec 19 19:52:24 2007] Checksum matches for 'AI-NaiveBayes1-1.3.tar.gz' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/META.yml' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/MANIFEST' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/README' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/Makefile.PL' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/8-1.out' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/5.t' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/4-3.out' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/auxfunctions.pl' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/6-3.out' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/8.t' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/2.t' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/5-3.out' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/6-2.out' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/3-1.out' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/6-1.out' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/a2.arff' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/2-3.out' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/1-1.out' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/7.t' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/4-2.out' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/6.t' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/1.t' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/6-4.out' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/2-2.out' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/3-2.out' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/7-2.out' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/3.t' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/2-1.out' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/4.t' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/1-2.out' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/5-2.out' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/4-1.out' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/3-3.out' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/5-1.out' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/t/7-1.out' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/NaiveBayes1.pm' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI-NaiveBayes1-1.3/Changes' [MSG] [Wed Dec 19 19:52:25 2007] Extracted 'AI::NaiveBayes1' to '/Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3' [MSG] [Wed Dec 19 19:52:27 2007] Checking if your kit is complete... Looks good Writing Makefile for AI::NaiveBayes1 [MSG] [Wed Dec 19 19:52:27 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Wed Dec 19 19:52:32 2007] cp NaiveBayes1.pm blib/lib/AI/NaiveBayes1.pm Manifying blib/man3/AI::NaiveBayes1.3 [ERROR] [Wed Dec 19 19:52:36 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /Volumes/Media/smoke/perl5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/1......Can't locate YAML.pm in @INC (@INC contains: /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/lib /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/arch /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib /Volumes/Media/smoke/perl5.10.0/lib/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl5.10.0/lib/5.10.0 /Volumes/Media/smoke/perl5.10.0/lib/site_perl/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl5.10.0/lib/site_perl/5.10.0 .) at /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/lib/AI/NaiveBayes1.pm line 375. # Looks like you planned 4 tests but only ran 2. # Looks like your test died just after 2. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 2/4 subtests t/2......Can't locate YAML.pm in @INC (@INC contains: /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/lib /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/arch /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib /Volumes/Media/smoke/perl5.10.0/lib/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl5.10.0/lib/5.10.0 /Volumes/Media/smoke/perl5.10.0/lib/site_perl/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl5.10.0/lib/site_perl/5.10.0 .) at /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/lib/AI/NaiveBayes1.pm line 375. # Looks like you planned 6 tests but only ran 2. # Looks like your test died just after 2. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 4/6 subtests t/3......Can't locate YAML.pm in @INC (@INC contains: /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/lib /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/arch /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib /Volumes/Media/smoke/perl5.10.0/lib/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl5.10.0/lib/5.10.0 /Volumes/Media/smoke/perl5.10.0/lib/site_perl/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl5.10.0/lib/site_perl/5.10.0 .) at /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/lib/AI/NaiveBayes1.pm line 375. # Looks like you planned 6 tests but only ran 2. # Looks like your test died just after 2. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 4/6 subtests t/4......Can't locate YAML.pm in @INC (@INC contains: /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/lib /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/arch /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib /Volumes/Media/smoke/perl5.10.0/lib/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl5.10.0/lib/5.10.0 /Volumes/Media/smoke/perl5.10.0/lib/site_perl/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl5.10.0/lib/site_perl/5.10.0 .) at /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/lib/AI/NaiveBayes1.pm line 375. # Looks like you planned 6 tests but only ran 2. # Looks like your test died just after 2. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 4/6 subtests t/5......Can't locate YAML.pm in @INC (@INC contains: /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/lib /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/arch /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib /Volumes/Media/smoke/perl5.10.0/lib/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl5.10.0/lib/5.10.0 /Volumes/Media/smoke/perl5.10.0/lib/site_perl/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl5.10.0/lib/site_perl/5.10.0 .) at /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/lib/AI/NaiveBayes1.pm line 368. # Looks like you planned 6 tests but only ran 2. # Looks like your test died just after 2. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 4/6 subtests t/6......Can't locate YAML.pm in @INC (@INC contains: /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/lib /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/arch /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib /Volumes/Media/smoke/perl5.10.0/lib/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl5.10.0/lib/5.10.0 /Volumes/Media/smoke/perl5.10.0/lib/site_perl/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl5.10.0/lib/site_perl/5.10.0 .) at /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/lib/AI/NaiveBayes1.pm line 375. # Looks like you planned 9 tests but only ran 2. # Looks like your test died just after 2. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 7/9 subtests t/7......Can't locate YAML.pm in @INC (@INC contains: /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/lib /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/arch /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib /Volumes/Media/smoke/perl5.10.0/lib/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl5.10.0/lib/5.10.0 /Volumes/Media/smoke/perl5.10.0/lib/site_perl/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl5.10.0/lib/site_perl/5.10.0 .) at /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/lib/AI/NaiveBayes1.pm line 375. # Looks like you planned 12 tests but only ran 2. # Looks like your test died just after 2. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 10/12 subtests t/8......Can't locate YAML.pm in @INC (@INC contains: /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/lib /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/arch /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib /Volumes/Media/smoke/perl5.10.0/lib/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl5.10.0/lib/5.10.0 /Volumes/Media/smoke/perl5.10.0/lib/site_perl/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl5.10.0/lib/site_perl/5.10.0 .) at t/8.t line 48. BEGIN failed--compilation aborted at t/8.t line 48. # Looks like your test died before it could output anything. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 2/2 subtests Test Summary Report ------------------- t/1.t (Wstat: 65280 Tests: 2 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 4 tests but ran 2. t/2.t (Wstat: 65280 Tests: 2 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 6 tests but ran 2. t/3.t (Wstat: 65280 Tests: 2 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 6 tests but ran 2. t/4.t (Wstat: 65280 Tests: 2 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 6 tests but ran 2. t/5.t (Wstat: 65280 Tests: 2 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 6 tests but ran 2. t/6.t (Wstat: 65280 Tests: 2 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 9 tests but ran 2. t/7.t (Wstat: 65280 Tests: 2 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 12 tests but ran 2. t/8.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 2 tests but ran 0. Files=8, Tests=14, 3 wallclock secs ( 0.19 usr 0.15 sys + 1.61 cusr 0.32 csys = 2.27 CPU) Result: FAIL Failed 8/8 test programs. 0/14 subtests failed. make: *** [test_dynamic] Error 255 [MSG] [Wed Dec 19 19:52:36 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: YAML As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'VLADO ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'YAML' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin PERL5LIB = :/Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/lib:/Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib/arch:/Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/AI-NaiveBayes1-1.3/blib PERL5_CPANPLUS_IS_RUNNING = 11506 PERL5_CPANPLUS_IS_VERSION = 0.83_09 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /Volumes/Media/smoke/perl5.10.0/bin/perl UID: $< = 502 EUID: $> = 502 GID: $( = 502 502 EGID: $) = 502 502 ------------------------------- -- Summary of my perl5 (revision 5 version 10 subversion 0) configuration: Platform: osname=darwin, osvers=8.10.0, archname=darwin-thread-multi-64int-2level uname='darwin afalglas.bingosnet.co.uk 8.10.0 darwin kernel version 8.10.0: wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc power macintosh powerpc ' config_args='-de -Dprefix=/Volumes/Media/smoke/perl5.10.0 -Dusethreads -Duse64bitint -Uusemymalloc' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe -I/usr/local/include', optimize='-O3', cppflags='-no-cpp-precomp -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /usr/lib libs=-ldbm -ldl -lm -lc perllibs=-ldl -lm -lc libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' ' cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup -L/usr/local/lib'
