This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Peter Karman, This is a computer-generated report for CatalystX-CRUD-Model-RDBO-0.08 on perl-5.10.0, created automatically by CPAN-Reporter-1.0601 and sent to the CPAN Testers mailing list. If you have received this email directly, it is because the person testing your distribution chose to send a copy to your CPAN email address; there may be a delay before the official report is received and processed by CPAN Testers. Thank you for uploading your work to CPAN. However, it appears that there were some problems with your distribution. If these results are not what you expect or if you would like to learn how to avoid FAIL reports for missing dependencies, unsupported operating systems, etc., please consult "Notes for CPAN Authors" on the CPAN Testers Wiki: http://cpantest.grango.org Sections of this report: * Tester comments * Program output * Prerequisites * Environment and other context ------------------------------ TESTER COMMENTS ------------------------------ Additional comments from tester: [none provided] ------------------------------ PROGRAM OUTPUT ------------------------------ Output from '/usr/bin/make test': PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/perl/pPXCIpe/[EMAIL PROTECTED]/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00-load........... # Failed test 'use CatalystX::CRUD::Model::RDBO;' # at t/00-load.t line 7. # Tried to use 'CatalystX::CRUD::Model::RDBO'. # Error: Can't locate Sort/SQL.pm in @INC (@INC contains: ../CatalystX-CRUD/lib /home/sand/.cpan/build/CatalystX-CRUD-Model-RDBO-0.08-9Hj4KB/blib/lib /home/sand/.cpan/build/CatalystX-CRUD-Model-RDBO-0.08-9Hj4KB/blib/arch /home/src/perl/repoperls/installed-perls/perl/pPXCIpe/[EMAIL PROTECTED]/lib/5.10.0/i686-linux /home/src/perl/repoperls/installed-perls/perl/pPXCIpe/[EMAIL PROTECTED]/lib/5.10.0 /home/src/perl/repoperls/installed-perls/perl/pPXCIpe/[EMAIL PROTECTED]/lib/site_perl/5.10.0/i686-linux /home/src/perl/repoperls/installed-perls/perl/pPXCIpe/[EMAIL PROTECTED]/lib/site_perl/5.10.0) at /home/src/perl/repoperls/installed-perls/perl/pPXCIpe/[EMAIL PROTECTED]/lib/site_perl/5.10.0/CatalystX/CRUD/Model/Utils.pm line 5. # BEGIN failed--compilation aborted at t/00-load.t line 7. # Compilation failed in require at (eval 23) line 3. # ...propagated at /home/src/perl/repoperls/installed-perls/perl/pPXCIpe/[EMAIL PROTECTED]/lib/5.10.0/base.pm line 93. # BEGIN failed--compilation aborted at /home/sand/.cpan/build/CatalystX-CRUD-Model-RDBO-0.08-9Hj4KB/blib/lib/CatalystX/CRUD/Model/RDBO.pm line 4. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. Use of uninitialized value $CatalystX::CRUD::Model::RDBO::VERSION in concatenation (.) or string at t/00-load.t line 10. # Testing CatalystX::CRUD::Model::RDBO , Perl 5.010000, /home/src/perl/repoperls/installed-perls/perl/pPXCIpe/[EMAIL PROTECTED]/bin/perl # Looks like you failed 1 test of 1. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests t/01-rdbo........... # Failed test 'use CatalystX::CRUD::Model::RDBO;' # at t/01-rdbo.t line 5. # Tried to use 'CatalystX::CRUD::Model::RDBO'. # Error: Can't locate Sort/SQL.pm in @INC (@INC contains: ../CatalystX-CRUD/lib /home/sand/.cpan/build/CatalystX-CRUD-Model-RDBO-0.08-9Hj4KB/blib/lib /home/sand/.cpan/build/CatalystX-CRUD-Model-RDBO-0.08-9Hj4KB/blib/arch /home/src/perl/repoperls/installed-perls/perl/pPXCIpe/[EMAIL PROTECTED]/lib/5.10.0/i686-linux /home/src/perl/repoperls/installed-perls/perl/pPXCIpe/[EMAIL PROTECTED]/lib/5.10.0 /home/src/perl/repoperls/installed-perls/perl/pPXCIpe/[EMAIL PROTECTED]/lib/site_perl/5.10.0/i686-linux /home/src/perl/repoperls/installed-perls/perl/pPXCIpe/[EMAIL PROTECTED]/lib/site_perl/5.10.0 .) at /home/src/perl/repoperls/installed-perls/perl/pPXCIpe/[EMAIL PROTECTED]/lib/site_perl/5.10.0/CatalystX/CRUD/Model/Utils.pm line 5. # BEGIN failed--compilation aborted at t/01-rdbo.t line 5. # Compilation failed in require at (eval 23) line 3. # ...propagated at /home/src/perl/repoperls/installed-perls/perl/pPXCIpe/[EMAIL PROTECTED]/lib/5.10.0/base.pm line 93. # BEGIN failed--compilation aborted at /home/sand/.cpan/build/CatalystX-CRUD-Model-RDBO-0.08-9Hj4KB/blib/lib/CatalystX/CRUD/Model/RDBO.pm line 4. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. Useless localization of subroutine entry at /home/src/perl/repoperls/installed-perls/perl/pPXCIpe/[EMAIL PROTECTED]/lib/site_perl/5.10.0/Catalyst/Action.pm line 41. Attempt to reload CatalystX/CRUD/Model/RDBO.pm aborted. Compilation failed in require at (eval 809) line 3. ...propagated at /home/src/perl/repoperls/installed-perls/perl/pPXCIpe/[EMAIL PROTECTED]/lib/5.10.0/base.pm line 93. BEGIN failed--compilation aborted at t/lib/MyApp/Model/Foo.pm line 2. Compilation failed in require at (eval 808) line 1. Compilation failed in require at /home/src/perl/repoperls/installed-perls/perl/pPXCIpe/[EMAIL PROTECTED]/lib/site_perl/5.10.0/Catalyst/Test.pm line 90. BEGIN failed--compilation aborted at t/01-rdbo.t line 12. # Looks like you planned 5 tests but only ran 4. # Looks like you failed 1 test of 4 run. # Looks like your test died just after 4. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 2/5 subtests t/boilerplate.......ok t/pod-coverage......ok t/pod...............ok Test Summary Report ------------------- t/00-load.t (Wstat: 256 Tests: 1 Failed: 1) Failed test number(s): 1 Non-zero exit status: 1 t/01-rdbo.t (Wstat: 65280 Tests: 4 Failed: 1) Failed test number(s): 1 Non-zero exit status: 255 Parse errors: Bad plan. You planned 5 tests but ran 4. Files=5, Tests=12, 4 wallclock secs ( 0.05 usr 0.02 sys + 3.00 cusr 0.24 csys = 3.31 CPU) Result: FAIL Failed 2/5 test programs. 2/12 subtests failed. make: *** [test_dynamic] Fehler 255 ------------------------------ PREREQUISITES ------------------------------ Prerequisite modules loaded: requires: Module Need Have ----------------- ---- ------ Catalyst::Runtime 0 5.7012 CatalystX::CRUD 0.18 0.18 Data::Dump 0 1.08 Rose::DB::Object 0 0.766 Rose::DBx::TestDB 0 0.04 Test::More 0 0.72 ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: LANG = de_DE.UTF-8 PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin PERL5LIB = PERL5_CPANPLUS_IS_RUNNING = 13338 PERL5_CPAN_IS_RUNNING = 13338 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/bin/zsh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): $^X = /home/src/perl/repoperls/installed-perls/perl/pPXCIpe/[EMAIL PROTECTED]/bin/perl $UID/$EUID = 1005 / 1005 $GID = 1005 1005 $EGID = 1005 1005 Perl module toolchain versions installed: Module Have ------------------- --------- CPAN 1.9205 Cwd 3.2501 ExtUtils::CBuilder 0.21 ExtUtils::Command 1.13 ExtUtils::Install 1.44 ExtUtils::MakeMaker 6.42 ExtUtils::Manifest 1.51_01 ExtUtils::ParseXS 2.18_02 File::Spec 3.2501 Module::Build 0.2808_01 Module::Signature 0.55 Test::Harness 3.05 Test::More 0.72 YAML 0.66 YAML::Syck 1.00 version 0.74 -- Summary of my perl5 (revision 5 version 10 subversion 0) configuration: Platform: osname=linux, osvers=2.6.22-1-k7, archname=i686-linux uname='linux k75 2.6.22-1-k7 #1 smp sun jul 29 15:15:55 utc 2007 i686 gnulinux ' config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/perl/pPXCIpe/[EMAIL PROTECTED] -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Doptimize=-g' hint=recommended, useposix=true, d_sigaction=define useithreads=undef, usemultiplicity=undef useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=undef, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g', cppflags='-DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib /usr/lib64 libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc libc=/lib/libc-2.6.1.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.6.1' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fPIC', lddlflags='-shared -g -L/usr/local/lib'
