This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear SREEKANTH,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.82. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Sun Dec 23 12:37:14 2007] Trying to get
'http://www.cpan.org/authors/id/S/SR/SREEKANTH/C-Analyzer-0.10.tar.gz'
[MSG] [Sun Dec 23 12:37:15 2007] Trying to get
'http://www.cpan.org/authors/id/S/SR/SREEKANTH/CHECKSUMS'
[MSG] [Sun Dec 23 12:37:15 2007] Checksum matches for 'C-Analyzer-0.10.tar.gz'
[MSG] [Sun Dec 23 12:37:16 2007] Extracted 'Analyzer/'
[MSG] [Sun Dec 23 12:37:16 2007] Extracted 'Analyzer/README'
[MSG] [Sun Dec 23 12:37:16 2007] Extracted 'Analyzer/scripts/'
[MSG] [Sun Dec 23 12:37:16 2007] Extracted 'Analyzer/Makefile.PL'
[MSG] [Sun Dec 23 12:37:16 2007] Extracted 'Analyzer/MANIFEST'
[MSG] [Sun Dec 23 12:37:16 2007] Extracted 'Analyzer/Todo'
[MSG] [Sun Dec 23 12:37:16 2007] Extracted 'Analyzer/Changes'
[MSG] [Sun Dec 23 12:37:16 2007] Extracted 'Analyzer/pm_to_blib'
[MSG] [Sun Dec 23 12:37:16 2007] Extracted 'Analyzer/LICENSE'
[MSG] [Sun Dec 23 12:37:16 2007] Extracted 'Analyzer/lib/'
[MSG] [Sun Dec 23 12:37:16 2007] Extracted 'Analyzer/lib/C/'
[MSG] [Sun Dec 23 12:37:16 2007] Extracted 'Analyzer/lib/C/Analyzer.pm'
[MSG] [Sun Dec 23 12:37:16 2007] Extracted 'Analyzer/t/'
[MSG] [Sun Dec 23 12:37:16 2007] Extracted 'Analyzer/t/001_load.t'
[MSG] [Sun Dec 23 12:37:16 2007] Extracted 'C::Analyzer' to
'/home/cpan/perl562/.cpanplus/5.6.2/build/Analyzer'
[MSG] [Sun Dec 23 12:37:16 2007] Checking if your kit is complete...
Looks good
Writing Makefile for C::Analyzer
[MSG] [Sun Dec 23 12:37:16 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[MSG] [Sun Dec 23 12:37:17 2007] Manifying blib/man3/C::Analyzer.3
[ERROR] [Sun Dec 23 12:37:18 2007] MAKE TEST failed: PERL_DL_NONLAZY=1
/home/cpan/perl562/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0,
'blib/lib', 'blib/arch')" t/*.t
t/001_load....
# Failed test 'use C::Analyzer;'
# at t/001_load.t line 7.
# Tried to use 'C::Analyzer'.
# Error: Can't locate C/Analyzer.pm in @INC (@INC contains:
/home/cpan/perl562/.cpanplus/5.6.2/build/Analyzer/blib/lib
/home/cpan/perl562/.cpanplus/5.6.2/build/Analyzer/blib/arch
/home/cpan/perl562/.cpanplus/5.6.2/build/Analyzer/blib
/home/cpan/perl562/lib/5.6.2/i386-netbsd-thread-multi-64int
/home/cpan/perl562/lib/5.6.2/i386-netbsd-thread-multi-64int
/home/cpan/perl562/lib/5.6.2
/home/cpan/perl562/lib/site_perl/5.6.2/i386-netbsd-thread-multi-64int
/home/cpan/perl562/lib/site_perl/5.6.2/i386-netbsd-thread-multi-64int
/home/cpan/perl562/lib/site_perl/5.6.2
/home/cpan/perl562/lib/site_perl/5.6.2/i386-netbsd-thread-multi-64int
/home/cpan/perl562/lib/site_perl/5.6.2 /home/cpan/perl562/lib/site_perl .
/home/cpan/perl562/lib/5.6.2/i386-netbsd-thread-multi-64int
/home/cpan/perl562/lib/5.6.2
/home/cpan/perl562/lib/site_perl/5.6.2/i386-netbsd-thread-multi-64int
/home/cpan/perl562/lib/site_perl/5.6.2 /home/cpan/perl562/lib/site_perl .) at
(eval 3) line 2.
# BEGIN failed--compilation aborted at t/001_load.t line 7.
Can't locate object method "new" via package "C::Analyzer" (perhaps you forgot
to load "C::Analyzer"?) at t/001_load.t line 9.
# Looks like you planned 2 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-2
Failed 2/2 tests, 0.00% okay
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/001_load.t 255 65280 2 3 1-2
Failed 1/1 test scripts. 2/2 subtests failed.
Files=1, Tests=2, 0 wallclock secs ( 0.11 cusr + 0.00 csys = 0.11 CPU)
Failed 1/1 test programs. 2/2 subtests failed.
gmake: *** [test_dynamic] Error 35
[MSG] [Sun Dec 23 12:37:18 2007] DEFAULT 'proceed_on_test_failure' HANDLER
RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
C::Analyzer
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'SREEKANTH ([EMAIL PROTECTED])',
... # other information
PREREQ_PM => {
'C::Analyzer' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Test::Simple 0.70 0.44
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH =
/home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
PERL5LIB =
:/home/cpan/perl562/.cpanplus/5.6.2/build/Analyzer/blib/lib:/home/cpan/perl562/.cpanplus/5.6.2/build/Analyzer/blib/arch:/home/cpan/perl562/.cpanplus/5.6.2/build/Analyzer/blib
PERL5_CPANPLUS_IS_EXECUTING =
PERL5_CPANPLUS_IS_RUNNING = 10990
PERL5_CPANPLUS_IS_VERSION = 0.82
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/perl562/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5.0 version 6 subversion 2) configuration:
Platform:
osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int
uname='netbsd canker.bingosnet.co.uk 3.1 netbsd 3.1 (generic_laptop) #0:
tue oct 31 04:32:05 utc 2006 [EMAIL
PROTECTED]:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric_laptop
i386 '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -I/usr/pkg/include',
optimize='-O',
cppflags='-fno-strict-aliasing -I/usr/pkg/include'
ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=4, usemymalloc=n, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib
-L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lgdbm -lm -lc -lposix -lcrypt -lutil -lpthread
perllibs=-lm -lc -lposix -lcrypt -lutil -lpthread
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared
-L/usr/pkg/lib'
