This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear SKATTOOR, This is a computer-generated error report created automatically by CPANPLUS, version 0.84. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Thu Dec 27 14:18:37 2007] Trying to get 'http://www.cpan.org/authors/id/S/SK/SKATTOOR/Device-Modem-GSM/CHECKSUMS' [MSG] [Thu Dec 27 14:18:38 2007] Checksum matches for 'Device-Modem-GSM-0.1.tar.gz' [MSG] [Thu Dec 27 14:18:38 2007] Extracted 'Device-Modem-GSM/' [MSG] [Thu Dec 27 14:18:38 2007] Extracted 'Device-Modem-GSM/MANIFEST' [MSG] [Thu Dec 27 14:18:38 2007] Extracted 'Device-Modem-GSM/README' [MSG] [Thu Dec 27 14:18:38 2007] Extracted 'Device-Modem-GSM/t/' [MSG] [Thu Dec 27 14:18:38 2007] Extracted 'Device-Modem-GSM/t/Device-Modem-GSM.t' [MSG] [Thu Dec 27 14:18:38 2007] Extracted 'Device-Modem-GSM/Makefile.PL' [MSG] [Thu Dec 27 14:18:38 2007] Extracted 'Device-Modem-GSM/lib/' [MSG] [Thu Dec 27 14:18:38 2007] Extracted 'Device-Modem-GSM/lib/Device/' [MSG] [Thu Dec 27 14:18:38 2007] Extracted 'Device-Modem-GSM/lib/Device/Modem/' [MSG] [Thu Dec 27 14:18:38 2007] Extracted 'Device-Modem-GSM/lib/Device/Modem/GSM.pm' [MSG] [Thu Dec 27 14:18:38 2007] Extracted 'Device-Modem-GSM/Changes' [MSG] [Thu Dec 27 14:18:38 2007] Extracted 'Device::Modem::GSM' to '/usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Device-Modem-GSM' [MSG] [Thu Dec 27 14:18:39 2007] Checking if your kit is complete... Looks good Writing Makefile for Device::Modem::GSM [MSG] [Thu Dec 27 14:18:39 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Thu Dec 27 14:18:41 2007] cp lib/Device/Modem/GSM.pm blib/lib/Device/Modem/GSM.pm Manifying blib/man3/Device::Modem::GSM.3 [ERROR] [Thu Dec 27 14:18:42 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/perl5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/Device-Modem-GSM...... Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests Test Summary Report ------------------- t/Device-Modem-GSM.t (Wstat: 256 Tests: 1 Failed: 1) Failed test number(s): 1 Non-zero exit status: 1 Files=1, Tests=1, 1 wallclock secs ( 0.02 usr 0.06 sys + 0.02 cusr 0.10 csys = 0.20 CPU) Result: FAIL # Failed test 'use Device::Modem::GSM;' # at t/Device-Modem-GSM.t line 9. # Tried to use 'Device::Modem::GSM'. # Error: Can't locate Device/Modem.pm in @INC (@INC contains: /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Device-Modem-GSM/blib/lib /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Device-Modem-GSM/blib/arch /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Device-Modem-GSM/blib /home/cpan/perl5.10.0/lib/5.10.0/i386-freebsd-thread-multi-64int /home/cpan/perl5.10.0/lib/5.10.0 /home/cpan/perl5.10.0/lib/site_perl/5.10.0/i386-freebsd-thread-multi-64int /home/cpan/perl5.10.0/lib/site_perl/5.10.0 .) at /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Device-Modem-GSM/blib/lib/Device/Modem/GSM.pm line 60. # BEGIN failed--compilation aborted at t/Device-Modem-GSM.t line 9. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. # Looks like you failed 1 test of 1. Failed 1/1 test programs. 1/1 subtests failed. *** Error code 1 Stop in /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Device-Modem-GSM. [MSG] [Thu Dec 27 14:18:42 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Device::Modem As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'SKATTOOR ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Device::Modem' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/X11R6/bin:/home/cpan/bin PERL5LIB = :/usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Device-Modem-GSM/blib/lib:/usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Device-Modem-GSM/blib/arch:/usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Device-Modem-GSM/blib PERL5_CPANPLUS_IS_RUNNING = 76175 PERL5_CPANPLUS_IS_VERSION = 0.84 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/local/bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cpan/perl5.10.0/bin/perl UID: $< = 1002 EUID: $> = 1002 GID: $( = 20 20 20 2 EGID: $) = 20 20 20 2 ------------------------------- -- Summary of my perl5 (revision 5 version 10 subversion 0) configuration: Platform: osname=freebsd, osvers=6.2-release, archname=i386-freebsd-thread-multi-64int uname='freebsd forneus.bingosnet.co.uk 6.2-release freebsd 6.2-release #0: fri jan 12 10:40:27 utc 2007 [EMAIL PROTECTED]:usrobjusrsrcsysgeneric i386 ' config_args='-e -Dprefix=/home/cpan/perl5.10.0 -Dusethreads -Duse64bitint -Dusemymalloc=n' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include', optimize='-O', cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='3.4.6 [FreeBSD] 20060305', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags ='-pthread -Wl,-E -L/usr/local/lib' libpth=/usr/lib /usr/local/lib libs=-lm -lcrypt perllibs=-lm -lcrypt libc=, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' ' cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
