This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear EZDB,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.82. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Sat Dec 29 00:36:27 2007] Trying to get 
'http://www.cpan.org/authors/id/E/EZ/EZDB/CHECKSUMS'
[MSG] [Sat Dec 29 00:36:28 2007] Checksum matches for 'Data-Table-1.51.tar.gz'
[MSG] [Sat Dec 29 00:36:29 2007] Extracted 'Data-Table-1.51/'
[MSG] [Sat Dec 29 00:36:29 2007] Extracted 'Data-Table-1.51/aaa.csv'
[MSG] [Sat Dec 29 00:36:29 2007] Extracted 'Data-Table-1.51/aaa.tsv'
[MSG] [Sat Dec 29 00:36:29 2007] Extracted 'Data-Table-1.51/bbb.csv'
[MSG] [Sat Dec 29 00:36:29 2007] Extracted 'Data-Table-1.51/Changes'
[MSG] [Sat Dec 29 00:36:29 2007] Extracted 'Data-Table-1.51/Makefile.PL'
[MSG] [Sat Dec 29 00:36:29 2007] Extracted 'Data-Table-1.51/MANIFEST'
[MSG] [Sat Dec 29 00:36:29 2007] Extracted 'Data-Table-1.51/README'
[MSG] [Sat Dec 29 00:36:29 2007] Extracted 'Data-Table-1.51/Table.html'
[MSG] [Sat Dec 29 00:36:29 2007] Extracted 'Data-Table-1.51/Table.pm'
[MSG] [Sat Dec 29 00:36:29 2007] Extracted 'Data-Table-1.51/test.pl'
[MSG] [Sat Dec 29 00:36:29 2007] Extracted 'Data-Table-1.51/t_dos.csv'
[MSG] [Sat Dec 29 00:36:29 2007] Extracted 'Data-Table-1.51/t_mac.csv'
[MSG] [Sat Dec 29 00:36:29 2007] Extracted 'Data-Table-1.51/t_unix.csv'
[MSG] [Sat Dec 29 00:36:29 2007] Extracted 'Data-Table-1.51/ccc.csv'
[MSG] [Sat Dec 29 00:36:29 2007] Extracted 'Data-Table-1.51/t_unix_noheader.csv'
[MSG] [Sat Dec 29 00:36:29 2007] Extracted 'Data::Table' to 
'/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Data-Table-1.51'
[MSG] [Sat Dec 29 00:36:30 2007] Checking if your kit is complete...
Looks good
Writing Makefile for Data::Table

[MSG] [Sat Dec 29 00:36:30 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Sat Dec 29 00:36:33 2007] cp Table.pm blib/lib/Data/Table.pm
AutoSplitting blib/lib/Data/Table.pm (blib/lib/auto/Data/Table)
Manifying blib/man3/Data::Table.3

[ERROR] [Sat Dec 29 00:36:34 2007] MAKE TEST failed:  PERL_DL_NONLAZY=1 
/Volumes/Media/smoke/perl562/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
1..60
ok loaded
ok 1 fromCSV
ok 2 colIndex
ok 3 nofCol
ok 4 nofRow
ok 5 html
ok 6 html2
ok 7 nofCol
ok 8 colMap
ok 9 colsMap
ok 10 delRow()
ok 11 addRow()
ok 12 delRows()
ok 13 delRows() & addRow()
ok 14 delCol()
ok 15 addCol()
ok 16 delCols()
ok 17 delCols() & addCol()
ok 18 rowRef()
ok 19 rowRefs()
ok 20 row()
ok 21 colRef()
ok 22 colRefs()
ok 23 col()
ok 24 rename()
ok 25 replace()
ok 26 swap()
ok 27 elm()
ok 28 elmRef()
ok 29 setElm()
ok 30 sort()
ok 31 match_pattern()
ok 32 match_string()
ok 33 clone()
ok 34 subTable()
ok 35 subTable($rowIdcsRef,undef)
ok 36 subTable(undef,$colIDsRef)
ok 37 rowMerge()
ok 38 colMerge()
ok 39 fromTSV and tsv
ok 40 rowHashRef
ok 41 looks good so far
ok 42 join: inner
ok 43 join: left outer
ok 44 join: right outer
ok 45 join: full outer
ok 46 instant method fromCSVi
ok 47 instant method fromTSVi
ok 48 rowMask
ok 49 header rename
ok 50 group
ok 51 pivot
ok 52 fromCSV using file handler
ok 53 fromTSV using file handler
ok 54 sort using custom operator
Cannot open in-memory file

[MSG] [Sat Dec 29 00:36:34 2007] DEFAULT 'proceed_on_test_failure' HANDLER 
RETURNING 'sub return value'


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 3.07e-02.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin
    PERL5LIB = 
:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Data-Table-1.51/blib/lib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Data-Table-1.51/blib/arch:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Data-Table-1.51/blib
    PERL5_CPANPLUS_IS_EXECUTING = 
    PERL5_CPANPLUS_IS_RUNNING = 20701
    PERL5_CPANPLUS_IS_VERSION = 0.82
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /Volumes/Media/smoke/perl562/bin/perl
    UID:  $<  = 502
    EUID: $>  = 502
    GID:  $(  = 502 502
    EGID: $)  = 502 502


-------------------------------


--

Summary of my perl5 (revision 5.0 version 6 subversion 2) configuration:
  Platform:
    osname=darwin, osvers=8.10.0, archname=darwin-thread-multi
    uname='darwin bingos-power-mac-g4-agp-graphics.local 8.10.0 darwin kernel 
version 8.10.0: wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc 
power macintosh powerpc '
    config_args=''
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define 
usemultiplicity=define
    useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
  Compiler:
    cc='cc', ccflags ='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp 
-fno-strict-aliasing -I/usr/local/include',
    optimize='-O3',
    cppflags='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp 
-fno-strict-aliasing -I/usr/local/include'
    ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)', 
gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', 
lseeksize=8
    alignbytes=8, usemymalloc=n, prototype=define
  Linker and Libraries:
    ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib
    libs=-ldbm -ldl -lm -lc
    perllibs=-ldl -lm -lc
    libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a
  Dynamic Linking:
    dlsrc=dl_dyld.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
    cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup 
-L/usr/local/lib'

Reply via email to