This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear STRZELEC, This is a computer-generated error report created automatically by CPANPLUS, version 0.84. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Mon Dec 31 11:36:38 2007] Trying to get 'http://www.cpan.org/authors/id/S/ST/STRZELEC/Gtk2-GladeXML-OO-0.01.tar.gz' [MSG] [Mon Dec 31 11:36:40 2007] Trying to get 'http://www.cpan.org/authors/id/S/ST/STRZELEC/CHECKSUMS' [MSG] [Mon Dec 31 11:36:40 2007] Checksum matches for 'Gtk2-GladeXML-OO-0.01.tar.gz' [MSG] [Mon Dec 31 11:36:41 2007] Extracted 'Gtk2-GladeXML-OO-0.01/Changes' [MSG] [Mon Dec 31 11:36:41 2007] Extracted 'Gtk2-GladeXML-OO-0.01/example/' [MSG] [Mon Dec 31 11:36:41 2007] Extracted 'Gtk2-GladeXML-OO-0.01/example/glade/' [MSG] [Mon Dec 31 11:36:41 2007] Extracted 'Gtk2-GladeXML-OO-0.01/example/glade/example.gladep' [MSG] [Mon Dec 31 11:36:41 2007] Extracted 'Gtk2-GladeXML-OO-0.01/example/glade/example.glade' [MSG] [Mon Dec 31 11:36:41 2007] Extracted 'Gtk2-GladeXML-OO-0.01/example/glade/example.gladep.bak' [MSG] [Mon Dec 31 11:36:41 2007] Extracted 'Gtk2-GladeXML-OO-0.01/example/glade/example.glade.bak' [MSG] [Mon Dec 31 11:36:41 2007] Extracted 'Gtk2-GladeXML-OO-0.01/example/Gtk2/' [MSG] [Mon Dec 31 11:36:41 2007] Extracted 'Gtk2-GladeXML-OO-0.01/example/Gtk2/GladeXML/' [MSG] [Mon Dec 31 11:36:41 2007] Extracted 'Gtk2-GladeXML-OO-0.01/example/Gtk2/GladeXML/OO.pm' [MSG] [Mon Dec 31 11:36:41 2007] Extracted 'Gtk2-GladeXML-OO-0.01/example/example.pl' [MSG] [Mon Dec 31 11:36:41 2007] Extracted 'Gtk2-GladeXML-OO-0.01/example/MyObject.pm' [MSG] [Mon Dec 31 11:36:41 2007] Extracted 'Gtk2-GladeXML-OO-0.01/Makefile.PL' [MSG] [Mon Dec 31 11:36:41 2007] Extracted 'Gtk2-GladeXML-OO-0.01/MANIFEST' [MSG] [Mon Dec 31 11:36:41 2007] Extracted 'Gtk2-GladeXML-OO-0.01/OO.pm' [MSG] [Mon Dec 31 11:36:41 2007] Extracted 'Gtk2-GladeXML-OO-0.01/README' [MSG] [Mon Dec 31 11:36:41 2007] Extracted 'Gtk2-GladeXML-OO-0.01/test.pl' [MSG] [Mon Dec 31 11:36:41 2007] Extracted 'Gtk2::GladeXML::OO' to '/home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Gtk2-GladeXML-OO-0.01' [MSG] [Mon Dec 31 11:36:42 2007] Checking if your kit is complete... Warning: the following files are missing in your kit: example example/glade example/Gtk2 example/Gtk2/GladeXML Please inform the author. Writing Makefile for Gtk2::GladeXML::OO [MSG] [Mon Dec 31 11:36:42 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Dec 31 11:36:45 2007] cp OO.pm blib/lib/Gtk2/GladeXML/OO.pm [ERROR] [Mon Dec 31 11:36:45 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/perl5.10.00/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl 1..1 Can't locate Exporter/Lite.pm in @INC (@INC contains: blib/lib blib/arch /home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Gtk2-GladeXML-OO-0.01/blib/lib /home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Gtk2-GladeXML-OO-0.01/blib/arch /home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Gtk2-GladeXML-OO-0.01/blib /home/cpan/perl5.10.00/lib/5.10.0/i686-linux-thread-multi-64int-ld /home/cpan/perl5.10.00/lib/5.10.0 /home/cpan/perl5.10.00/lib/site_perl/5.10.0/i686-linux-thread-multi-64int-ld /home/cpan/perl5.10.00/lib/site_perl/5.10.0 .) at blib/lib/Gtk2/GladeXML/OO.pm line 6. BEGIN failed--compilation aborted at blib/lib/Gtk2/GladeXML/OO.pm line 6. Compilation failed in require at test.pl line 11. BEGIN failed--compilation aborted at test.pl line 11. not ok 1 make: *** [test_dynamic] Error 2 [MSG] [Mon Dec 31 11:36:45 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Exporter::Lite As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'STRZELEC ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Exporter::Lite' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 LANG = en_US LC_COLLATE = C PATH = /usr/local/bin:/usr/bin:/bin:/usr/games:/usr/lib/java/bin:/usr/lib/java/jre/bin:. PERL5LIB = :/home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Gtk2-GladeXML-OO-0.01/blib/lib:/home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Gtk2-GladeXML-OO-0.01/blib/arch:/home/cpan/perl5.10.00/.cpanplus/5.10.0/build/Gtk2-GladeXML-OO-0.01/blib PERL5_CPANPLUS_IS_RUNNING = 13938 PERL5_CPANPLUS_IS_VERSION = 0.84 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen.linux Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cpan/perl5.10.00/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 100 11 17 18 19 83 100 EGID: $) = 100 11 17 18 19 83 100 ------------------------------- -- Summary of my perl5 (revision 5 version 10 subversion 0) configuration: Platform: osname=linux, osvers=2.6.21.5-smp, archname=i686-linux-thread-multi-64int-ld uname='linux penguin 2.6.21.5-smp #2 smp tue jun 19 14:58:11 cdt 2007 i686 amd athlon(tm) 64 processor 3000+ authenticamd gnulinux ' config_args='-e -Dprefix=/home/cpan/perl5.10.00 -Dusethreads -Duse64bitint -Dusemymalloc=n' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.1.2', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.5.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.5' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
