This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear CORNELIS, This is a computer-generated error report created automatically by CPANPLUS, version 0.84. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Mon Dec 31 19:44:40 2007] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/C/CO/CORNELIS/CHECKSUMS' [MSG] [Mon Dec 31 19:44:41 2007] Checksum matches for 'Data-Utilities-0.01.tar.gz' [MSG] [Mon Dec 31 19:44:41 2007] Extracted 'Data-Utilities-0.01/' [MSG] [Mon Dec 31 19:44:41 2007] Extracted 'Data-Utilities-0.01/t/' [MSG] [Mon Dec 31 19:44:41 2007] Extracted 'Data-Utilities-0.01/t/0.t' [MSG] [Mon Dec 31 19:44:41 2007] Extracted 'Data-Utilities-0.01/t/001_load.t' [MSG] [Mon Dec 31 19:44:41 2007] Extracted 'Data-Utilities-0.01/t/array1.t' [MSG] [Mon Dec 31 19:44:41 2007] Extracted 'Data-Utilities-0.01/t/1.t' [MSG] [Mon Dec 31 19:44:41 2007] Extracted 'Data-Utilities-0.01/t/comparator1.t' [MSG] [Mon Dec 31 19:44:41 2007] Extracted 'Data-Utilities-0.01/lib/' [MSG] [Mon Dec 31 19:44:41 2007] Extracted 'Data-Utilities-0.01/lib/Data/' [MSG] [Mon Dec 31 19:44:41 2007] Extracted 'Data-Utilities-0.01/lib/Data/Utilities.pm' [MSG] [Mon Dec 31 19:44:41 2007] Extracted 'Data-Utilities-0.01/lib/Data/Transformator.pm' [MSG] [Mon Dec 31 19:44:41 2007] Extracted 'Data-Utilities-0.01/lib/Data/Differences.pm' [MSG] [Mon Dec 31 19:44:41 2007] Extracted 'Data-Utilities-0.01/lib/Data/Comparator.pm' [MSG] [Mon Dec 31 19:44:41 2007] Extracted 'Data-Utilities-0.01/Changes' [MSG] [Mon Dec 31 19:44:41 2007] Extracted 'Data-Utilities-0.01/MANIFEST' [MSG] [Mon Dec 31 19:44:41 2007] Extracted 'Data-Utilities-0.01/META.yml' [MSG] [Mon Dec 31 19:44:41 2007] Extracted 'Data-Utilities-0.01/Todo' [MSG] [Mon Dec 31 19:44:41 2007] Extracted 'Data-Utilities-0.01/README' [MSG] [Mon Dec 31 19:44:41 2007] Extracted 'Data-Utilities-0.01/Makefile.PL' [MSG] [Mon Dec 31 19:44:41 2007] Extracted 'Data-Utilities-0.01/LICENSE' [MSG] [Mon Dec 31 19:44:41 2007] Extracted 'Data::Utilities' to '/home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01' [MSG] [Mon Dec 31 19:44:41 2007] Writing Makefile for Data::Utilities [MSG] [Mon Dec 31 19:44:41 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Dec 31 19:44:41 2007] Manifying blib/man3/Data::Utilities.3 [ERROR] [Mon Dec 31 19:44:41 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/bri/bleadperl/bin/perl5.11.0 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/0................Can't locate Clone.pm in @INC (@INC contains: /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/lib /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/arch /home/bri/lib/perl /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/lib /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/arch /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib /home/bri/bleadperl/lib/5.11.0/x86_64-linux-ld /home/bri/bleadperl/lib/5.11.0 /home/bri/bleadperl/lib/site_perl/5.11.0/x86_64-linux-ld /home/bri/bleadperl/lib/site_perl/5.11.0 .) at /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/lib/Data/Comparator.pm line 30. BEGIN failed--compilation aborted at /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/lib/Data/Comparator.pm line 30. Compilation failed in require at t/0.t line 23. BEGIN failed--compilation aborted at t/0.t line 23. # Looks like your test died before it could output anything. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 1/1 subtests t/001_load......... # Failed test 'use Data::Utilities;' # at t/001_load.t line 7. # Tried to use 'Data::Utilities'. # Error: Can't locate Clone.pm in @INC (@INC contains: /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/lib /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/arch /home/bri/lib/perl /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/lib /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/arch /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib /home/bri/bleadperl/lib/5.11.0/x86_64-linux-ld /home/bri/bleadperl/lib/5.11.0 /home/bri/bleadperl/lib/site_perl/5.11.0/x86_64-linux-ld /home/bri/bleadperl/lib/site_perl/5.11.0 .) at /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/lib/Data/Comparator.pm line 30. # BEGIN failed--compilation aborted at /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/lib/Data/Comparator.pm line 30. # Compilation failed in require at /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/lib/Data/Utilities.pm line 24. # BEGIN failed--compilation aborted at /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/lib/Data/Utilities.pm line 24. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. # Looks like you failed 1 test of 1. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests t/1................Can't locate Clone.pm in @INC (@INC contains: /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/lib /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/arch /home/bri/lib/perl /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/lib /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/arch /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib /home/bri/bleadperl/lib/5.11.0/x86_64-linux-ld /home/bri/bleadperl/lib/5.11.0 /home/bri/bleadperl/lib/site_perl/5.11.0/x86_64-linux-ld /home/bri/bleadperl/lib/site_perl/5.11.0 .) at /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/lib/Data/Comparator.pm line 30. BEGIN failed--compilation aborted at /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/lib/Data/Comparator.pm line 30. Compilation failed in require at t/1.t line 40. BEGIN failed--compilation aborted at t/1.t line 40. # Looks like your test died before it could output anything. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 14/14 subtests t/array1...........Can't locate Clone.pm in @INC (@INC contains: /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/lib /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/arch /home/bri/lib/perl /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/lib /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/arch /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib /home/bri/bleadperl/lib/5.11.0/x86_64-linux-ld /home/bri/bleadperl/lib/5.11.0 /home/bri/bleadperl/lib/site_perl/5.11.0/x86_64-linux-ld /home/bri/bleadperl/lib/site_perl/5.11.0 .) at /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/lib/Data/Comparator.pm line 30. BEGIN failed--compilation aborted at /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/lib/Data/Comparator.pm line 30. Compilation failed in require at t/array1.t line 27. BEGIN failed--compilation aborted at t/array1.t line 27. # Looks like your test died before it could output anything. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 6/6 subtests t/comparator1......Can't locate Clone.pm in @INC (@INC contains: /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/lib /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/arch /home/bri/lib/perl /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/lib /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/arch /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib /home/bri/bleadperl/lib/5.11.0/x86_64-linux-ld /home/bri/bleadperl/lib/5.11.0 /home/bri/bleadperl/lib/site_perl/5.11.0/x86_64-linux-ld /home/bri/bleadperl/lib/site_perl/5.11.0 .) at /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/lib/Data/Comparator.pm line 30. BEGIN failed--compilation aborted at /home/bri/bleadperl/.cpanplus/5.11.0/build/Data-Utilities-0.01/blib/lib/Data/Comparator.pm line 30. Compilation failed in require at t/comparator1.t line 30. BEGIN failed--compilation aborted at t/comparator1.t line 30. # Looks like your test died before it could output anything. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 8/8 subtests Test Summary Report ------------------- t/0.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 1 tests but ran 0. t/001_load.t (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 t/1.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 14 tests but ran 0. t/array1.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 6 tests but ran 0. t/comparator1.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 8 tests but ran 0. Files=5, Tests=1, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.08 cusr 0.02 csys = 0.12 CPU) Result: FAIL Failed 5/5 test programs. 1/1 subtests failed. make: *** [test_dynamic] Error 255 [MSG] [Mon Dec 31 19:44:41 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Clone As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'CORNELIS ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Clone' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Test::Simple 0.74 0.44 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.03. -- Summary of my perl5 (revision 5 version 11 subversion 0 patch 32790) configuration: Platform: osname=linux, osvers=2.6.22-3-amd64, archname=x86_64-linux-ld uname='linux zippy 2.6.22-3-amd64 #1 smp sun nov 4 18:18:09 utc 2007 x86_64 gnulinux ' config_args='' hint=previous, useposix=true, d_sigaction=define useithreads=undef, usemultiplicity=undef useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=define, uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64' ccversion='', gccversion='4.2.3 20071123 (prerelease) (Debian 4.2.2-4)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8 alignbytes=16, prototype=define Linker and Libraries: ld='cc', ldflags =' -fstack-protector -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64 libs=-lnsl -ldl -lm -lcrypt -lutil -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.7' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
