This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear STEPHEN, This is a computer-generated error report created automatically by CPANPLUS, version 0.84. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Mon Dec 31 22:57:03 2007] Trying to get 'ftp://ftp.rediris.es/mirror/CPAN/authors/id/S/ST/STEPHEN/Video-Xine-0.08.tar.gz' [ERROR] [Mon Dec 31 22:57:06 2007] Fetching of 'ftp://ftp.rediris.es/mirror/CPAN/authors/id/S/ST/STEPHEN/Video-Xine-0.08.tar.gz' failed: Command failed: [MSG] [Mon Dec 31 22:57:06 2007] Trying to get 'ftp://ftp.udc.es/CPAN/authors/id/S/ST/STEPHEN/Video-Xine-0.08.tar.gz' [MSG] [Mon Dec 31 22:57:15 2007] Trying to get 'ftp://ftp.rediris.es/mirror/CPAN/authors/id/S/ST/STEPHEN/CHECKSUMS' [MSG] [Mon Dec 31 22:57:16 2007] Archive size is not known for 'Video-Xine-0.08.tar.gz' [MSG] [Mon Dec 31 22:57:16 2007] No 'md5' checksum known for 'Video-Xine-0.08.tar.gz' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video-Xine-0.08/' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video-Xine-0.08/ChangeLog' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video-Xine-0.08/MANIFEST' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video-Xine-0.08/Build.PL' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video-Xine-0.08/README' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video-Xine-0.08/t/' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video-Xine-0.08/t/test.ogg' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video-Xine-0.08/t/test_config' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video-Xine-0.08/t/Video-Xine.t' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video-Xine-0.08/t/X11.t' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video-Xine-0.08/t/Event.t' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video-Xine-0.08/t/time_015.avi' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video-Xine-0.08/typemap' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video-Xine-0.08/Makefile.PL' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video-Xine-0.08/lib/' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video-Xine-0.08/lib/Video/' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video-Xine-0.08/lib/Video/ppport.h' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video-Xine-0.08/lib/Video/Xine.pm' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video-Xine-0.08/lib/Video/Xine.xs' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video-Xine-0.08/inc/' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video-Xine-0.08/inc/Devel/' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video-Xine-0.08/inc/Devel/CheckLib.pm' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video-Xine-0.08/META.yml' [MSG] [Mon Dec 31 22:57:17 2007] Extracted 'Video::Xine' to '/home/cpantest/perl/5.10.0-thread-multi/var/cpanplus/5.10.0/build/Video-Xine-0.08' [MSG] [Mon Dec 31 22:57:30 2007] # running Build.PL /home/cpantest/perl/5.10.0-thread-multi//bin/perl Build.PL Checking whether your kit is complete... Looks good Checking prerequisites... Looks good Creating new 'Build' script for 'Video-Xine' version '0.08' [MSG] [Mon Dec 31 22:57:30 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Dec 31 22:57:55 2007] /home/cpantest/perl/5.10.0-thread-multi//bin/perl Build --makefile_env_macros 1 Copying lib/Video/Xine.pm -> blib/lib/Video/Xine.pm lib/Video/Xine.xs -> lib/Video/Xine.c cc -I/home/cpantest/perl/5.10.0-thread-multi/lib/5.10.0/sparc64-netbsd-thread-multi/CORE -DXS_VERSION="0.08" -DVERSION="0.08" -DPIC -fPIC -I/usr/pkg/include -pthread -c -fno-strict-aliasing -pipe -I/usr/pkg/include -O -o lib/Video/Xine.o lib/Video/Xine.c ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/Video/Xine/Xine.bs') cc --whole-archive -shared -L/usr/pkg/lib -o blib/arch/auto/Video/Xine/Xine.so lib/Video/Xine.o -L/usr/pkg/lib -lxine -lz -lresolv -lrt Manifying blib/lib/Video/Xine.pm -> blib/libdoc/Video::Xine.3 [ERROR] [Mon Dec 31 22:58:22 2007] MAKE TEST failed: Illegal seek /home/cpantest/perl/5.10.0-thread-multi//bin/perl Build --makefile_env_macros 1 test t/Event........... Dubious, test returned 255 (wstat 65280, 0xff00) Failed 1/1 subtests t/Video-Xine......Can't load '/home/cpantest/perl/5.10.0-thread-multi/var/cpanplus/5.10.0/build/Video-Xine-0.08/blib/arch/auto/Video/Xine/Xine.so' for module Video::Xine: Shared object "libxine.so.1" not found at /home/cpantest/perl/5.10.0-thread-multi//lib/5.10.0/sparc64-netbsd-thread-multi/DynaLoader.pm line 203. at t/Event.t line 6 Compilation failed in require at t/Event.t line 6. BEGIN failed--compilation aborted at t/Event.t line 6. # Looks like your test died before it could output anything. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 11/11 subtests t/X11............. # Failed test 'use Video::Xine;' # at t/Video-Xine.t line 7. # Tried to use 'Video::Xine'. # Error: Can't load '/home/cpantest/perl/5.10.0-thread-multi/var/cpanplus/5.10.0/build/Video-Xine-0.08/blib/arch/auto/Video/Xine/Xine.so' for module Video::Xine: Shared object "libxine.so.1" not found at /home/cpantest/perl/5.10.0-thread-multi//lib/5.10.0/sparc64-netbsd-thread-multi/DynaLoader.pm line 203. # at (eval 5) line 2 # Compilation failed in require at (eval 5) line 2. # BEGIN failed--compilation aborted at (eval 5) line 2. Bareword "XINE_ENGINE_PARAM_VERBOSITY" not allowed while "strict subs" in use at t/Video-Xine.t line 15. Bareword "XINE_STATUS_IDLE" not allowed while "strict subs" in use at t/Video-Xine.t line 33. Bareword "XINE_STATUS_PLAY" not allowed while "strict subs" in use at t/Video-Xine.t line 41. Bareword "XINE_STATUS_STOP" not allowed while "strict subs" in use at t/Video-Xine.t line 43. Bareword "XINE_STATUS_IDLE" not allowed while "strict subs" in use at t/Video-Xine.t line 45. Bareword "XINE_STATUS_PLAY" not allowed while "strict subs" in use at t/Video-Xine.t line 55. Bareword "XINE_ERROR_NO_INPUT_PLUGIN" not allowed while "strict subs" in use at t/Video-Xine.t line 65. Execution of t/Video-Xine.t aborted due to compilation errors. # Looks like you planned 11 tests but only ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test died just after 1. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 1/1 subtests Test Summary Report ------------------- t/Event.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 1 tests but ran 0. t/Video-Xine.t (Wstat: 65280 Tests: 1 Failed: 1) Failed test number(s): 1 Non-zero exit status: 255 Parse errors: Bad plan. You planned 11 tests but ran 1. t/X11.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 1 tests but ran 0. Files=3, Tests=1, 9 wallclock secs ( 0.20 usr 0.37 sys + 2.69 cusr 6.24 csys = 9.50 CPU) Result: FAIL Can't load '/home/cpantest/perl/5.10.0-thread-multi/var/cpanplus/5.10.0/build/Video-Xine-0.08/blib/arch/auto/Video/Xine/Xine.so' for module Video::Xine: Shared object "libxine.so.1" not found at /home/cpantest/perl/5.10.0-thread-multi//lib/5.10.0/sparc64-netbsd-thread-multi/DynaLoader.pm line 203. at t/X11.t line 7 Compilation failed in require at t/X11.t line 7. BEGIN failed--compilation aborted at t/X11.t line 7. # Looks like your test died before it could output anything. Failed 3/3 test programs. 1/1 subtests failed. *** Error code 255 Stop. make: stopped in /home/cpantest/perl/5.10.0-thread-multi/var/cpanplus/5.10.0/build/Video-Xine-0.08 [MSG] [Mon Dec 31 22:58:23 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want ExtUtils::CBuilder 0.21 0 Module::Build 0.2808_01 0 Test::More 0.74 0.01 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. -- Summary of my perl5 (revision 5 version 10 subversion 0) configuration: Platform: osname=netbsd, osvers=4.0_rc5, archname=sparc64-netbsd-thread-multi uname='netbsd boletus.int.qindel.com 4.0_rc5 netbsd 4.0_rc5 (sunblade100) #3: mon dec 10 16:36:36 cet 2007 root@:usrsrcsysarchsparc64compilesunblade100 sparc64 ' config_args='' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=define, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include', optimize='-O', cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include' ccversion='', gccversion='4.1.2 20061021 prerelease (NetBSD nb3 20061125)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=87654321 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib' libpth=/usr/pkg/lib /lib /usr/lib libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E ' cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
