This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear STEPHEN, This is a computer-generated error report created automatically by CPANPLUS, version 0.83_08. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Wed Jan 2 09:58:56 2008] Trying to get 'http://www.cpan.org/authors/id/S/ST/STEPHEN/CHECKSUMS' [MSG] [Wed Jan 2 09:58:57 2008] Checksum matches for 'Video-Xine-0.10.tar.gz' [MSG] [Wed Jan 2 09:58:59 2008] Extracted 'Video-Xine-0.10/' [MSG] [Wed Jan 2 09:58:59 2008] Extracted 'Video-Xine-0.10/ChangeLog' [MSG] [Wed Jan 2 09:58:59 2008] Extracted 'Video-Xine-0.10/MANIFEST' [MSG] [Wed Jan 2 09:58:59 2008] Extracted 'Video-Xine-0.10/Build.PL' [MSG] [Wed Jan 2 09:58:59 2008] Extracted 'Video-Xine-0.10/README' [MSG] [Wed Jan 2 09:58:59 2008] Extracted 'Video-Xine-0.10/t/' [MSG] [Wed Jan 2 09:58:59 2008] Extracted 'Video-Xine-0.10/t/test.ogg' [MSG] [Wed Jan 2 09:58:59 2008] Extracted 'Video-Xine-0.10/t/test_config' [MSG] [Wed Jan 2 09:58:59 2008] Extracted 'Video-Xine-0.10/t/Video-Xine.t' [MSG] [Wed Jan 2 09:58:59 2008] Extracted 'Video-Xine-0.10/t/X11.t' [MSG] [Wed Jan 2 09:58:59 2008] Extracted 'Video-Xine-0.10/t/Event.t' [MSG] [Wed Jan 2 09:58:59 2008] Extracted 'Video-Xine-0.10/t/time_015.avi' [MSG] [Wed Jan 2 09:58:59 2008] Extracted 'Video-Xine-0.10/typemap' [MSG] [Wed Jan 2 09:58:59 2008] Extracted 'Video-Xine-0.10/lib/' [MSG] [Wed Jan 2 09:58:59 2008] Extracted 'Video-Xine-0.10/lib/Video/' [MSG] [Wed Jan 2 09:58:59 2008] Extracted 'Video-Xine-0.10/lib/Video/ppport.h' [MSG] [Wed Jan 2 09:58:59 2008] Extracted 'Video-Xine-0.10/lib/Video/Xine.pm' [MSG] [Wed Jan 2 09:58:59 2008] Extracted 'Video-Xine-0.10/lib/Video/Xine.xs' [MSG] [Wed Jan 2 09:58:59 2008] Extracted 'Video-Xine-0.10/inc/' [MSG] [Wed Jan 2 09:58:59 2008] Extracted 'Video-Xine-0.10/inc/Devel/' [MSG] [Wed Jan 2 09:58:59 2008] Extracted 'Video-Xine-0.10/inc/Devel/CheckLib.pm' [MSG] [Wed Jan 2 09:58:59 2008] Extracted 'Video-Xine-0.10/META.yml' [MSG] [Wed Jan 2 09:59:00 2008] Extracted 'Video::Xine' to '/home/cpan/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10' [ERROR] [Wed Jan 2 09:59:00 2008] This module requires 'Module::Build' and 'CPANPLUS::Dist::Build' to be installed, but you don't have it! Will fall back to 'CPANPLUS::Dist::MM', but might not be able to install! [MSG] [Wed Jan 2 09:59:00 2008] No 'Makefile.PL' found - attempting to generate one [MSG] [Wed Jan 2 09:59:01 2008] Checking if your kit is complete... Looks good Writing Makefile for Video::Xine [MSG] [Wed Jan 2 09:59:01 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Wed Jan 2 09:59:05 2008] cp lib/Video/Xine.pm blib/lib/Video/Xine.pm cp lib/Video/Xine.xs blib/lib/Video/Xine.xs cp lib/Video/ppport.h blib/lib/Video/ppport.h Manifying blib/man3/Video::Xine.3 [ERROR] [Wed Jan 2 09:59:08 2008] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/Event...........Can't locate loadable object for module Video::Xine in @INC (@INC contains: /home/cpan/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib /home/cpan/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi-64int /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at t/Event.t line 6 Compilation failed in require at t/Event.t line 6. BEGIN failed--compilation aborted at t/Event.t line 6. # Looks like your test died before it could output anything. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 1/1 subtests t/Video-Xine...... # Failed test 'use Video::Xine;' # in t/Video-Xine.t at line 7. # Tried to use 'Video::Xine'. # Error: Can't locate loadable object for module Video::Xine in @INC (@INC contains: /home/cpan/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib /home/cpan/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi-64int /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at (eval 5) line 2 # Compilation failed in require at (eval 5) line 2. # BEGIN failed--compilation aborted at t/Video-Xine.t line 7. Bareword "XINE_ENGINE_PARAM_VERBOSITY" not allowed while "strict subs" in use at t/Video-Xine.t line 15. Bareword "XINE_STATUS_IDLE" not allowed while "strict subs" in use at t/Video-Xine.t line 33. Bareword "XINE_STATUS_PLAY" not allowed while "strict subs" in use at t/Video-Xine.t line 41. Bareword "XINE_STATUS_STOP" not allowed while "strict subs" in use at t/Video-Xine.t line 43. Bareword "XINE_STATUS_IDLE" not allowed while "strict subs" in use at t/Video-Xine.t line 45. Bareword "XINE_STATUS_PLAY" not allowed while "strict subs" in use at t/Video-Xine.t line 55. Bareword "XINE_ERROR_NO_INPUT_PLUGIN" not allowed while "strict subs" in use at t/Video-Xine.t line 65. Execution of t/Video-Xine.t aborted due to compilation errors. # Looks like you planned 11 tests but only ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test died just after 1. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 11/11 subtests t/X11.............Can't locate loadable object for module Video::Xine in @INC (@INC contains: /home/cpan/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib /home/cpan/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi-64int /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at t/X11.t line 7 Compilation failed in require at t/X11.t line 7. BEGIN failed--compilation aborted at t/X11.t line 7. # Looks like your test died before it could output anything. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 1/1 subtests Test Summary Report ------------------- t/Event.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 1 tests but ran 0. t/Video-Xine.t (Wstat: 65280 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 255 Parse errors: Bad plan. You planned 11 tests but ran 1. t/X11.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 1 tests but ran 0. Files=3, Tests=1, 2 wallclock secs ( 0.00 usr 0.23 sys + 0.17 cusr 0.99 csys = 1.39 CPU) Result: FAIL Failed 3/3 test programs. 1/1 subtests failed. *** Error code 255 Stop in /home/cpan/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10 (line 754 of Makefile). [MSG] [Wed Jan 2 09:59:09 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:. PERL5LIB = :/home/cpan/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/lib:/home/cpan/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/arch:/home/cpan/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib PERL5_CPANPLUS_IS_RUNNING = 28884 PERL5_CPANPLUS_IS_VERSION = 0.83_08 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/ksh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cpan/perl588/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 1000 0 1000 EGID: $) = 1000 0 1000 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=openbsd, osvers=4.2, archname=OpenBSD.i386-openbsd-thread-multi-64int uname='openbsd wynionyn.bingosnet.co.uk 4.2 generic#375 i386 ' config_args='-Dprefix=/home/cpan/perl588 -Dusethreads -Duse64bitint -Uusemymalloc' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-pthread -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include', optimize='-O2', cppflags='-pthread -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include' ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.2' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags ='-pthread -Wl,-E -L/usr/local/lib' libpth=/usr/local/lib /usr/lib libs=-lm -lutil -lc perllibs=-lm -lutil -lc libc=/usr/lib/libc.so.41.0, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' ' cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib'
