This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear STEPHEN, This is a computer-generated error report created automatically by CPANPLUS, version 0.82. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Thu Jan 3 08:11:09 2008] Trying to get 'http://www.cpan.org/authors/id/S/ST/STEPHEN/Video-Xine-0.10.tar.gz' [MSG] [Thu Jan 3 08:11:14 2008] Trying to get 'http://www.cpan.org/authors/id/S/ST/STEPHEN/CHECKSUMS' [MSG] [Thu Jan 3 08:11:14 2008] Checksum matches for 'Video-Xine-0.10.tar.gz' [MSG] [Thu Jan 3 08:11:15 2008] Extracted 'Video-Xine-0.10/' [MSG] [Thu Jan 3 08:11:15 2008] Extracted 'Video-Xine-0.10/ChangeLog' [MSG] [Thu Jan 3 08:11:15 2008] Extracted 'Video-Xine-0.10/MANIFEST' [MSG] [Thu Jan 3 08:11:15 2008] Extracted 'Video-Xine-0.10/Build.PL' [MSG] [Thu Jan 3 08:11:15 2008] Extracted 'Video-Xine-0.10/README' [MSG] [Thu Jan 3 08:11:15 2008] Extracted 'Video-Xine-0.10/t/' [MSG] [Thu Jan 3 08:11:15 2008] Extracted 'Video-Xine-0.10/t/test.ogg' [MSG] [Thu Jan 3 08:11:15 2008] Extracted 'Video-Xine-0.10/t/test_config' [MSG] [Thu Jan 3 08:11:15 2008] Extracted 'Video-Xine-0.10/t/Video-Xine.t' [MSG] [Thu Jan 3 08:11:15 2008] Extracted 'Video-Xine-0.10/t/X11.t' [MSG] [Thu Jan 3 08:11:15 2008] Extracted 'Video-Xine-0.10/t/Event.t' [MSG] [Thu Jan 3 08:11:15 2008] Extracted 'Video-Xine-0.10/t/time_015.avi' [MSG] [Thu Jan 3 08:11:15 2008] Extracted 'Video-Xine-0.10/typemap' [MSG] [Thu Jan 3 08:11:15 2008] Extracted 'Video-Xine-0.10/lib/' [MSG] [Thu Jan 3 08:11:15 2008] Extracted 'Video-Xine-0.10/lib/Video/' [MSG] [Thu Jan 3 08:11:15 2008] Extracted 'Video-Xine-0.10/lib/Video/ppport.h' [MSG] [Thu Jan 3 08:11:15 2008] Extracted 'Video-Xine-0.10/lib/Video/Xine.pm' [MSG] [Thu Jan 3 08:11:15 2008] Extracted 'Video-Xine-0.10/lib/Video/Xine.xs' [MSG] [Thu Jan 3 08:11:15 2008] Extracted 'Video-Xine-0.10/inc/' [MSG] [Thu Jan 3 08:11:15 2008] Extracted 'Video-Xine-0.10/inc/Devel/' [MSG] [Thu Jan 3 08:11:15 2008] Extracted 'Video-Xine-0.10/inc/Devel/CheckLib.pm' [MSG] [Thu Jan 3 08:11:15 2008] Extracted 'Video-Xine-0.10/META.yml' [MSG] [Thu Jan 3 08:11:15 2008] Extracted 'Video::Xine' to '/home/cwill1is/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10' [ERROR] [Thu Jan 3 08:11:15 2008] This module requires 'Module::Build' and 'CPANPLUS::Dist::Build' to be installed, but you don't have it! Will fall back to 'CPANPLUS::Dist::MM', but might not be able to install! [MSG] [Thu Jan 3 08:11:15 2008] No 'Makefile.PL' found - attempting to generate one [MSG] [Thu Jan 3 08:11:18 2008] Checking if your kit is complete... Looks good Writing Makefile for Video::Xine [MSG] [Thu Jan 3 08:11:18 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Thu Jan 3 08:11:32 2008] cp lib/Video/Xine.pm blib/lib/Video/Xine.pm cp lib/Video/Xine.xs blib/lib/Video/Xine.xs cp lib/Video/ppport.h blib/lib/Video/ppport.h [ERROR] [Thu Jan 3 08:11:40 2008] MAKE TEST failed: /home/cwill1is/perl588/bin/perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/Event........... Dubious, test returned 255 (wstat 65280, 0xff00) Failed 1/1 subtests Can't locate loadable object for module Video::Xine in @INC (@INC contains: /home/cwill1is/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/lib /home/cwill1is/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/arch /home/cwill1is/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib /home/cwill1is/perl588/lib/5.8.8/cygwin-thread-multi-64int /home/cwill1is/perl588/lib/5.8.8 /home/cwill1is/perl588/lib/site_perl/5.8.8/cygwin-thread-multi-64int /home/cwill1is/perl588/lib/site_perl/5.8.8 /home/cwill1is/perl588/lib/site_perl .) at t/Event.t line 6 Compilation failed in require at t/Event.t line 6. BEGIN failed--compilation aborted at t/Event.t line 6. # Looks like your test died before it could output anything. t/Video-Xine...... Dubious, test returned 255 (wstat 65280, 0xff00) Failed 11/11 subtests # Failed test 'use Video::Xine;' # at t/Video-Xine.t line 7. # Tried to use 'Video::Xine'. # Error: Can't locate loadable object for module Video::Xine in @INC (@INC contains: /home/cwill1is/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/lib /home/cwill1is/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/arch /home/cwill1is/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib /home/cwill1is/perl588/lib/5.8.8/cygwin-thread-multi-64int /home/cwill1is/perl588/lib/5.8.8 /home/cwill1is/perl588/lib/site_perl/5.8.8/cygwin-thread-multi-64int /home/cwill1is/perl588/lib/site_perl/5.8.8 /home/cwill1is/perl588/lib/site_perl .) at (eval 5) line 2 # Compilation failed in require at (eval 5) line 2. # BEGIN failed--compilation aborted at t/Video-Xine.t line 7. Bareword "XINE_ENGINE_PARAM_VERBOSITY" not allowed while "strict subs" in use at t/Video-Xine.t line 15. Bareword "XINE_STATUS_IDLE" not allowed while "strict subs" in use at t/Video-Xine.t line 33. Bareword "XINE_STATUS_PLAY" not allowed while "strict subs" in use at t/Video-Xine.t line 41. Bareword "XINE_STATUS_STOP" not allowed while "strict subs" in use at t/Video-Xine.t line 43. Bareword "XINE_STATUS_IDLE" not allowed while "strict subs" in use at t/Video-Xine.t line 45. Bareword "XINE_STATUS_PLAY" not allowed while "strict subs" in use at t/Video-Xine.t line 55. Bareword "XINE_ERROR_NO_INPUT_PLUGIN" not allowed while "strict subs" in use at t/Video-Xine.t line 65. Execution of t/Video-Xine.t aborted due to compilation errors. # Looks like you planned 11 tests but only ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test died just after 1. t/X11............. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 1/1 subtests Test Summary Report ------------------- t/Event.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 1 tests but ran 0. t/Video-Xine.t (Wstat: 65280 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 255 Parse errors: Bad plan. You planned 11 tests but ran 1. t/X11.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 1 tests but ran 0. Files=3, Tests=1, 3 wallclock secs ( 0.05 usr 0.05 sys + 1.26 cusr 1.20 csys = 2.56 CPU) Result: FAIL Can't locate loadable object for module Video::Xine in @INC (@INC contains: /home/cwill1is/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/lib /home/cwill1is/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/arch /home/cwill1is/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib /home/cwill1is/perl588/lib/5.8.8/cygwin-thread-multi-64int /home/cwill1is/perl588/lib/5.8.8 /home/cwill1is/perl588/lib/site_perl/5.8.8/cygwin-thread-multi-64int /home/cwill1is/perl588/lib/site_perl/5.8.8 /home/cwill1is/perl588/lib/site_perl .) at t/X11.t line 7 Compilation failed in require at t/X11.t line 7. BEGIN failed--compilation aborted at t/X11.t line 7. # Looks like your test died before it could output anything. Failed 3/3 test programs. 1/1 subtests failed. [MSG] [Thu Jan 3 08:11:40 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 COMSPEC = C:\WINDOWS\system32\cmd.exe INCLUDE = C:\strawberry\c\include;C:\strawberry\perl\lib\CORE LIB = C:\strawberry\c\lib;C:\strawberry\perl\bin NUMBER_OF_PROCESSORS = 1 PATH = /usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/cygdrive/c/GNUWin32/bin:/cygdrive/c/Program Files/Subversion/bin:/cygdrive/c/strawberry/c/bin:/cygdrive/c/strawberry/perl/bin:/cygdrive/c/WINDOWS/system32/WindowsPowerShell/v1.0:/cygdrive/c/Program Files/Support Tools/:/cygdrive/c/Mingw/dmake:/cygdrive/c/Mingw/bin:/cygdrive/c/Mingw/tools:/cygdrive/c/Perl/bin/:/cygdrive/c/WINDOWS/system32:/cygdrive/c/WINDOWS:/cygdrive/c/WINDOWS/System32/Wbem:/cygdrive/c/Program Files/Microsoft SQL Server/80/Tools/BINN://scc030/helpdeskv6$/HelpDesk/HDBIN32/:/cygdrive/c/Program Files/Vim/vim63:/cygdrive/c/Program Files/QuickTime/QTSystem/:/cygdrive/c/Program Files/SSH Communications Security/SSH Secure Shell:/cygdrive/c/Program Files/Nmap PERL5LIB = :/home/cwill1is/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/lib:/home/cwill1is/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/arch:/home/cwill1is/perl588/.cpanplus/5.8.8/build/Video-Xine-0.10/blib PERL5_CPANPLUS_IS_RUNNING = 44976 PERL5_CPANPLUS_IS_VERSION = 0.82 PERL_MM_USE_DEFAULT = 1 PROCESSOR_IDENTIFIER = x86 Family 15 Model 1 Stepping 2, GenuineIntel SHELL = /bin/sh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cwill1is/perl588/bin/perl.exe UID: $< = 11964 EUID: $> = 11964 GID: $( = 10513 46503 47137 49232 18930 19834 44599 44594 13857 14694 11265 11812 11814 47366 51275 12222 10519 35917 10513 10512 1026 1003 545 544 EGID: $) = 10513 46503 47137 49232 18930 19834 44599 44594 13857 14694 11265 11812 11814 47366 51275 12222 10519 35917 10513 10512 1026 1003 545 544 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=cygwin, osvers=1.5.24(0.15642), archname=cygwin-thread-multi-64int uname='cygwin_nt-5.2 citu003 1.5.24(0.15642) 2007-01-23 18:50 i686 cygwin ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-DPERL_USE_SAFE_PUTENV -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include', optimize='-O2', cppflags='-DPERL_USE_SAFE_PUTENV -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.4 (cygming special, gdc 0.12, using dmd 0.125)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='ld2', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /usr/lib /lib libs=-lgdbm -ldb -ldl -lcrypt -lgdbm_compat perllibs=-ldl -lcrypt -lgdbm_compat libc=/usr/lib/libc.a, so=dll, useshrplib=true, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' ' cccdlflags=' ', lddlflags=' -L/usr/local/lib'
