This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear TLBDK, This is a computer-generated error report created automatically by CPANPLUS, version 0.83_08. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sat Jan 5 08:34:30 2008] Trying to get 'http://www.cpan.org/authors/id/T/TL/TLBDK/CHECKSUMS' [MSG] [Sat Jan 5 08:34:31 2008] Checksum matches for 'IO-EventMux-1.02.tar.gz' [MSG] [Sat Jan 5 08:34:31 2008] Extracted 'IO-EventMux-1.02/' [MSG] [Sat Jan 5 08:34:31 2008] Extracted 'IO-EventMux-1.02/Build.PL' [MSG] [Sat Jan 5 08:34:31 2008] Extracted 'IO-EventMux-1.02/t/' [MSG] [Sat Jan 5 08:34:31 2008] Extracted 'IO-EventMux-1.02/t/cfd.t' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/t/disconnect.t' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/t/connection-refused-tcp.t' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/t/perlcriticrc' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/t/disconnect-delayed-write.t' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/t/critic.t' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/t/pod.t' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/t/buffered-http-simple-post.t' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/t/udp.t' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/t/connection-refused-udp-sendto.t' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/t/fairness-by-event.t' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/t/udp-speed.t.skip' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/t/pod-coverage.t' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/t/tcp-send-accept-test.t' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/t/socket-send-error-2.6.19.t' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/t/buffered-http-simple-get.t' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/t/max-read-size.t' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/t/types.t' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/t/connection-refused-udp.t' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/t/udp-speed-noeventmux.t.skip' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/examples/' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/examples/execwait.pl' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/META.yml' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/show-crash-with-stdin.pl' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/README' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/ChangeLog' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/lib/' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/lib/IO/' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/lib/IO/EventMux.pm' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/Makefile.PL' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO-EventMux-1.02/MANIFEST' [MSG] [Sat Jan 5 08:34:32 2008] Extracted 'IO::EventMux' to '/export/home/chris/perl588/.cpanplus/5.8.8/build/IO-EventMux-1.02' [MSG] [Sat Jan 5 08:34:34 2008] Checking if your kit is complete... Looks good Writing Makefile for IO::EventMux [MSG] [Sat Jan 5 08:34:34 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sat Jan 5 08:34:37 2008] cp show-crash-with-stdin.pl blib/lib/IO/show-crash-with-stdin.pl cp lib/IO/EventMux.pm blib/lib/IO/EventMux.pm Manifying blib/man3/IO::EventMux.3 [ERROR] [Sat Jan 5 08:34:59 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /export/home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/buffered-http-simple-get........... # Failed test 'Type came back in the right order' # in t/buffered-http-simple-get.t at line 38. # got: 'readyreadclosingclosed' # expected: 'readclosingclosed' # Looks like you failed 1 test of 2. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/2 subtests t/buffered-http-simple-post.......... # Failed test 'Type came back in the right order' # in t/buffered-http-simple-post.t at line 56. # got: 'readyreadclosingclosed' # expected: 'readclosingclosed' # Looks like you failed 1 test of 2. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/2 subtests t/cfd................................ok t/connection-refused-tcp............. # Looks like your test died before it could output anything. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 1/1 subtests t/connection-refused-udp-sendto......ok t/connection-refused-udp............. # Failed test 'We did not get a connection error' # in t/connection-refused-udp.t at line 29. # Looks like you failed 1 test of 1. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests t/critic.............................skipped: Test::Perl::Critic required to criticise code t/disconnect-delayed-write...........ok t/disconnect.........................ok t/fairness-by-event..................ok t/max-read-size...................... # Failed test 'Succeeds when it should' # in t/max-read-size.t at line 35. # got: 'readyreadreadreadclosingclosed' # expected: 'readreadreadclosingclosed' # Failed test 'Fails when it should' # in t/max-read-size.t at line 38. # got: 'readyreaderrorread_lastclosingclosed' # expected: 'readerrorread_lastclosingclosed' # Looks like you failed 2 tests of 2. Dubious, test returned 2 (wstat 512, 0x200) Failed 2/2 subtests t/pod-coverage.......................skipped: Test::Pod::Coverage 1.04 required for testing POD coverage t/pod................................skipped: Test::Pod 1.14 required for testing POD t/socket-send-error-2.6.19...........ok t/tcp-send-accept-test...............ok t/types..............................Could not open socket on (127.0.0.1:10046): Connection refused # Looks like you planned 5 tests but only ran 4. # Looks like your test died just after 4. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 1/5 subtests t/udp................................ok Test Summary Report ------------------- t/buffered-http-simple-get.t (Wstat: 256 Tests: 2 Failed: 1) Failed test: 1 Non-zero exit status: 1 t/buffered-http-simple-post.t (Wstat: 256 Tests: 2 Failed: 1) Failed test: 1 Non-zero exit status: 1 t/connection-refused-tcp.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 1 tests but ran 0. t/connection-refused-udp.t (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 t/max-read-size.t (Wstat: 512 Tests: 2 Failed: 2) Failed tests: 1-2 Non-zero exit status: 2 t/types.t (Wstat: 65280 Tests: 4 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 5 tests but ran 4. Files=17, Tests=34, 21 wallclock secs ( 0.43 usr 0.59 sys + 4.98 cusr 2.80 csys = 8.80 CPU) Result: FAIL Failed 6/17 test programs. 5/34 subtests failed. *** Error code 29 make: Fatal error: Command failed for target `test_dynamic' [MSG] [Sat Jan 5 08:34:59 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Test::More 0.62 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 LANG = C PATH = /export/home/chris/perl/bin:/usr/sfw/bin:/usr/ccs/bin:/usr/local/bin:/usr/bin: PERL5LIB = :/export/home/chris/perl588/.cpanplus/5.8.8/build/IO-EventMux-1.02/blib/lib:/export/home/chris/perl588/.cpanplus/5.8.8/build/IO-EventMux-1.02/blib/arch:/export/home/chris/perl588/.cpanplus/5.8.8/build/IO-EventMux-1.02/blib PERL5_CPANPLUS_IS_RUNNING = 12107 PERL5_CPANPLUS_IS_VERSION = 0.83_08 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /export/home/chris/perl588/bin/perl UID: $< = 100 EUID: $> = 100 GID: $( = 1 1 EGID: $) = 1 1 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=solaris, osvers=2.10, archname=i86pc-solaris-thread-multi-64int uname='sunos soleil 5.10 generic_118855-33 i86pc i386 i86pc ' config_args='-e -Dprefix=/export/home/chris/perl588 -Dusethreads -Duse64bitint -Dusemymalloc' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV', optimize='-O', cppflags='-D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.3 (csl-sol210-3_4-branch+sol_rpath)', gccosandvers='solaris2.10' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib ' libpth=/usr/local/lib /usr/lib /usr/ccs/lib libs=-lsocket -lnsl -ldl -lm -lpthread -lc perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' ' cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
