This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear KIMRYAN,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.83_08. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Sun Jan  6 13:43:30 2008] Trying to get 
'http://www.cpan.org/authors/id/K/KI/KIMRYAN/Locale-SubCountry-1.39.tar.gz'
[MSG] [Sun Jan  6 13:43:32 2008] Trying to get 
'http://www.cpan.org/authors/id/K/KI/KIMRYAN/CHECKSUMS'
[MSG] [Sun Jan  6 13:43:33 2008] Checksum matches for 
'Locale-SubCountry-1.39.tar.gz'
[MSG] [Sun Jan  6 13:43:33 2008] Extracted 'Locale-SubCountry-1.39/'
[MSG] [Sun Jan  6 13:43:33 2008] Extracted 'Locale-SubCountry-1.39/Changes'
[MSG] [Sun Jan  6 13:43:33 2008] Extracted 'Locale-SubCountry-1.39/lib/'
[MSG] [Sun Jan  6 13:43:33 2008] Extracted 'Locale-SubCountry-1.39/lib/Locale/'
[MSG] [Sun Jan  6 13:43:33 2008] Extracted 
'Locale-SubCountry-1.39/lib/Locale/SubCountry.pm'
[MSG] [Sun Jan  6 13:43:33 2008] Extracted 'Locale-SubCountry-1.39/Makefile.PL'
[MSG] [Sun Jan  6 13:43:33 2008] Extracted 'Locale-SubCountry-1.39/MANIFEST'
[MSG] [Sun Jan  6 13:43:33 2008] Extracted 'Locale-SubCountry-1.39/META.yml'
[MSG] [Sun Jan  6 13:43:33 2008] Extracted 'Locale-SubCountry-1.39/README'
[MSG] [Sun Jan  6 13:43:33 2008] Extracted 'Locale-SubCountry-1.39/t/'
[MSG] [Sun Jan  6 13:43:33 2008] Extracted 'Locale-SubCountry-1.39/t/main.t'
[MSG] [Sun Jan  6 13:43:33 2008] Extracted 
'Locale-SubCountry-1.39/t/pod-coverage.t'
[MSG] [Sun Jan  6 13:43:33 2008] Extracted 'Locale-SubCountry-1.39/t/pod.t'
[MSG] [Sun Jan  6 13:43:33 2008] Extracted 'Locale::SubCountry' to 
'/home/cpan/perl588/.cpanplus/5.8.8/build/Locale-SubCountry-1.39'
[MSG] [Sun Jan  6 13:43:36 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Locale::SubCountry

[MSG] [Sun Jan  6 13:43:36 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Sun Jan  6 13:43:39 2008] cp lib/Locale/SubCountry.pm 
blib/lib/Locale/SubCountry.pm
Manifying blib/man3/Locale::SubCountry.3

[ERROR] [Sun Jan  6 13:43:40 2008] MAKE TEST failed: Illegal seek 
PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" 
"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/main..............Invalid country name: AUSTRALIA chosen at 
/home/cpan/perl588/.cpanplus/5.8.8/build/Locale-SubCountry-1.39/blib/lib/Locale/SubCountry.pm
 line 531, <DATA> line 22011.
Can't call method "code" on an undefined value at t/main.t line 16, <DATA> line 
22011.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 15/15 subtests 
t/pod-coverage......skipped: Test::Pod::Coverage 1.04 required for testing POD 
coverage
t/pod...............skipped: Test::Pod 1.14 required for testing POD

Test Summary Report
-------------------
t/main.t        (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 15 tests but ran 0.
Files=3, Tests=0,  0 wallclock secs ( 0.00 usr  0.06 sys +  0.16 cusr  0.10 
csys =  0.32 CPU)
Result: FAIL
Failed 1/3 test programs. 0/0 subtests failed.
make: *** [test_dynamic] Error 255

[MSG] [Sun Jan  6 13:43:40 2008] DEFAULT 'proceed_on_test_failure' HANDLER 
RETURNING 'sub return value'


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by 
POE::Component::CPAN::YACSmoke.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = en_GB.UTF-8
    PATH = /usr/local/bin:/bin:/usr/bin:/usr/X11/bin
    PERL5LIB = 
:/home/cpan/perl588/.cpanplus/5.8.8/build/Locale-SubCountry-1.39/blib/lib:/home/cpan/perl588/.cpanplus/5.8.8/build/Locale-SubCountry-1.39/blib/arch:/home/cpan/perl588/.cpanplus/5.8.8/build/Locale-SubCountry-1.39/blib
    PERL5_CPANPLUS_IS_RUNNING = 13537
    PERL5_CPANPLUS_IS_VERSION = 0.83_08
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = screen.linux

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/cpan/perl588/bin/perl
    UID:  $<  = 1000
    EUID: $>  = 1000
    GID:  $(  = 100 100
    EGID: $)  = 100 100


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.16.38, archname=i686-linux-thread-multi-64int-ld
    uname='linux scratch 2.6.16.38 #1 preempt thu feb 22 16:04:10 gmt 2007 i686 
athlon-4 i386 gnulinux '
    config_args='-e'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define 
usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS 
-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include 
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS 
-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='4.0.3', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, 
Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'

Reply via email to