This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Kees Cook, This is a computer-generated error report created automatically by CPANPLUS, version 0.84. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Mon Jan 7 04:47:34 2008] Trying to get 'http://www.cpan.org/authors/id/S/SR/SREZIC/perl-GPS-0.15_92.tar.gz' [MSG] [Mon Jan 7 04:47:39 2008] Trying to get 'http://www.cpan.org/authors/id/S/SR/SREZIC/CHECKSUMS' [MSG] [Mon Jan 7 04:47:41 2008] Checksum matches for 'perl-GPS-0.15_92.tar.gz' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/examples' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/COPYING' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/Changes' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/Garmin.pm' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/MANIFEST' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/TODO' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/Serial.pm' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/Base.pm' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/Garmin' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/t' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/NMEA.pm' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/NMEA' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/Makefile.PL' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/README' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/NMEA/Handler.pm' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/t/connect.t' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/t/nmea.t' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/t/base.t' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/Garmin/Handler.pm' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/Garmin/Constant.pm' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/examples/Borders.log' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/examples/upload-test.pl' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/examples/check-port.pl' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl-GPS-0.15_92/examples/upload-wpt-test.pl' [MSG] [Mon Jan 7 04:47:41 2008] Extracted 'perl::GPS' to '/home/cwill1is/blead/.cpanplus/5.11.0/build/perl-GPS-0.15_92' [MSG] [Mon Jan 7 04:47:44 2008] Checking if your kit is complete... Looks good Warning: prerequisite Device::SerialPort 0.07 not found. Writing Makefile for GPS::Garmin [MSG] [Mon Jan 7 04:47:44 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Jan 7 04:47:44 2008] Module 'perl::GPS' requires 'Device::SerialPort' version '0.07' to be installed [MSG] [Mon Jan 7 04:47:44 2008] Trying to get 'http://www.cpan.org/authors/id/C/CO/COOK/Device-SerialPort-1.04.tar.gz' [MSG] [Mon Jan 7 04:47:45 2008] Trying to get 'http://www.cpan.org/authors/id/C/CO/COOK/CHECKSUMS' [MSG] [Mon Jan 7 04:47:46 2008] Checksum matches for 'Device-SerialPort-1.04.tar.gz' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/modemtest' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/t/' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/t/10basic.t' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/t/AltPort.pm' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/t/21inherited-state.t' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/t/01timing.t' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/t/11saved-state.t' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/t/20inherited.t' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/Device-SerialPort.spec' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/MANIFEST' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/configure.ac' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/Makefile.PL' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/eg/' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/eg/demo3.plx' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/eg/example1.txt' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/eg/demo4.plx' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/eg/demo8.plx' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/eg/any_os.plx' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/eg/example2.txt' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/eg/demo5.plx' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/eg/demo1.plx' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/eg/demo2.plx' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/eg/demo6.plx' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/eg/example6.txt' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/eg/example7.txt' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/eg/example5.txt' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/eg/example4.txt' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/eg/options.plx' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/eg/demo7.plx' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/eg/example8.txt' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/eg/example3.txt' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/README' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/config.h.in' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/SerialPort.pm' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/Changes' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/SerialPort.xs' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/TODO' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/configure' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/show-tiocm.c.test' [MSG] [Mon Jan 7 04:47:47 2008] Extracted 'Device-SerialPort-1.04/META.yml' [MSG] [Mon Jan 7 04:47:48 2008] Extracted 'Device::SerialPort' to '/home/cwill1is/blead/.cpanplus/5.11.0/build/Device-SerialPort-1.04' [MSG] [Mon Jan 7 04:51:58 2008] To enable serial port tests, use: perl Makefile.PL TESTPORT=<DEVICE> where <DEVICE> is a specific port or 'auto' to autodetect. Running ./configure ... checking for gcc... gcc checking for C compiler default output file name... a.exe checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... .exe checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for gcc option to accept ISO C99... -std=gnu99 checking for gcc -std=gnu99 option to accept ISO Standard C... (cached) -std=gnu99 checking how to run the C preprocessor... gcc -std=gnu99 -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for library containing strerror... none required checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes checking sys/termiox.h usability... no checking sys/termiox.h presence... no checking for sys/termiox.h... no checking sys/termios.h usability... yes checking sys/termios.h presence... yes checking for sys/termios.h... yes checking sys/ttycom.h usability... no checking sys/ttycom.h presence... no checking for sys/ttycom.h... no checking sys/modem.h usability... no checking sys/modem.h presence... no checking for sys/modem.h... no checking IOKit/serial/ioss.h usability... no checking IOKit/serial/ioss.h presence... no checking for IOKit/serial/ioss.h... no checking definition of _SC_CLK_TCK... found checking definition of TIOCMBIS... found checking definition of TIOCMBIC... found checking definition of TIOCMGET... found checking definition of CRTSCTS... found checking definition of OCRNL... found checking definition of ONLCR... found checking definition of ECHOKE... found checking definition of ECHOCTL... found checking definition of TIOCM_CAR... found checking definition of TIOCM_CD... found checking definition of TIOCM_RNG... found checking definition of TIOCM_RI... found checking definition of TIOCM_CTS... found checking definition of TIOCM_DSR... found checking definition of TIOCMIWAIT... missing checking definition of TIOCGICOUNT... missing checking definition of TIOCINQ... found checking definition of FIONREAD... missing checking definition of TIOCOUTQ... missing checking definition of TIOCSER_TEMT... missing checking definition of TIOCM_LE... missing checking definition of TIOCSERGETLSR... missing checking definition of TIOCSDTR... missing checking definition of TIOCCDTR... missing checking definition of TIOCM_RTS... found checking definition of TIOCM_DTR... found checking definition of CTSXON... missing checking definition of RTSXOFF... missing checking definition of TCGETX... missing checking definition of TCSETX... missing checking definition of IOSSIOSPEED... missing checking definition of B0... found checking definition of B50... found checking definition of B75... found checking definition of B110... found checking definition of B134... found checking definition of B150... found checking definition of B200... found checking definition of B300... found checking definition of B600... found checking definition of B1200... found checking definition of B1800... found checking definition of B2400... found checking definition of B4800... found checking definition of B9600... found checking definition of B19200... found checking definition of B38400... found checking definition of B57600... found checking definition of B115200... found checking definition of B230400... found checking definition of B460800... missing checking definition of B500000... missing checking definition of B576000... missing checking definition of B921600... missing checking definition of B1000000... missing checking definition of B1152000... missing checking definition of B1500000... missing checking definition of B2000000... missing checking definition of B2500000... missing checking definition of B3000000... missing checking definition of B3500000... missing checking definition of B4000000... missing checking serial control via ioctl... yes checking read/write of RTS signal... yes checking read/write of DTR signal... yes checking read access to modem lines... yes checking read access to buffer status... no checking read access to serial line status... no configure: WARNING: You will not be able to check the serial buffer state (to test for flushes) configure: WARNING: You will not be able to check serial line status (to do full write flush) checking normal CTS/RTS flow control... yes configure: creating ./config.status config.status: creating config.h Checking if your kit is complete... Looks good Writing Makefile for Device::SerialPort You're ready to run 'make' now... [MSG] [Mon Jan 7 04:51:58 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Jan 7 04:52:19 2008] cp SerialPort.pm blib/lib/Device/SerialPort.pm /home/cwill1is/blead/bin/perl5.11.0.exe /home/cwill1is/blead/lib/perl5/5.11.0/ExtUtils/xsubpp -typemap /home/cwill1is/blead/lib/perl5/5.11.0/ExtUtils/typemap SerialPort.xs > SerialPort.xsc && mv SerialPort.xsc SerialPort.c gcc -c -I. -DPERL_USE_SAFE_PUTENV -U__STRICT_ANSI__ -fno-strict-aliasing -pipe -I/usr/local/include -DUSEIMPORTLIB -O2 -DVERSION=\"1.04\" -DXS_VERSION=\"1.04\" "-I/home/cwill1is/blead/lib/perl5/5.11.0/cygwin-thread-multi-64int/CORE" SerialPort.c Running Mkbootstrap for Device::SerialPort () chmod 644 SerialPort.bs rm -f blib/arch/auto/Device/SerialPort/SerialPort.dll g++ --shared -Wl,--enable-auto-import -Wl,--export-all-symbols -Wl,--stack,8388608 -Wl,--enable-auto-image-base -Wl,--enable-auto-import -L/usr/local/lib SerialPort.o -o blib/arch/auto/Device/SerialPort/SerialPort.dll \ /home/cwill1is/blead/lib/perl5/5.11.0/cygwin-thread-multi-64int/CORE/libperl.dll.a \ chmod 755 blib/arch/auto/Device/SerialPort/SerialPort.dll cp SerialPort.bs blib/arch/auto/Device/SerialPort/SerialPort.bs chmod 644 blib/arch/auto/Device/SerialPort/SerialPort.bs cp modemtest blib/script/modemtest /home/cwill1is/blead/bin/perl5.11.0.exe "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/modemtest [ERROR] [Mon Jan 7 04:52:29 2008] MAKE TEST failed: Illegal seek /home/cwill1is/blead/bin/perl5.11.0.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/01timing............... Dubious, test returned 1 (wstat 256, 0x100) Failed 1/7 subtests # Failed test 'measured sleep as less than 2 seconds' # at t/01timing.t line 33. # then: 3441360234 now: 3441362374 diff: 2140 # Looks like you failed 1 test of 7. t/10basic................skipped: No serial port selected for use with testing t/11saved-state..........skipped: No serial port selected for use with testing t/20inherited............skipped: No serial port selected for use with testing t/21inherited-state......skipped: No serial port selected for use with testing Test Summary Report ------------------- t/01timing.t (Wstat: 256 Tests: 7 Failed: 1) Failed test: 7 Non-zero exit status: 1 Files=5, Tests=7, 6 wallclock secs ( 0.03 usr 0.09 sys + 2.15 cusr 1.37 csys = 3.65 CPU) Result: FAIL Failed 1/5 test programs. 1/7 subtests failed. make: *** [test_dynamic] Error 255 [MSG] [Mon Jan 7 04:52:29 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Test::More 0.74 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 COMSPEC = C:\WINDOWS\system32\cmd.exe INCLUDE = C:\strawberry\c\include;C:\strawberry\perl\lib\CORE LIB = C:\strawberry\c\lib;C:\strawberry\perl\bin NUMBER_OF_PROCESSORS = 1 PATH = /usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/cygdrive/c/GNUWin32/bin:/cygdrive/c/Program Files/Subversion/bin:/cygdrive/c/strawberry/c/bin:/cygdrive/c/strawberry/perl/bin:/cygdrive/c/WINDOWS/system32/WindowsPowerShell/v1.0:/cygdrive/c/Program Files/Support Tools/:/cygdrive/c/Mingw/dmake:/cygdrive/c/Mingw/bin:/cygdrive/c/Mingw/tools:/cygdrive/c/Perl/bin/:/cygdrive/c/WINDOWS/system32:/cygdrive/c/WINDOWS:/cygdrive/c/WINDOWS/System32/Wbem:/cygdrive/c/Program Files/Microsoft SQL Server/80/Tools/BINN://scc030/helpdeskv6$/HelpDesk/HDBIN32/:/cygdrive/c/Program Files/Vim/vim63:/cygdrive/c/Program Files/QuickTime/QTSystem/:/cygdrive/c/Program Files/SSH Communications Security/SSH Secure Shell:/cygdrive/c/Program Files/Nmap PERL5LIB = :/home/cwill1is/blead/.cpanplus/5.11.0/build/Device-SerialPort-1.04/blib/lib:/home/cwill1is/blead/.cpanplus/5.11.0/build/Device-SerialPort-1.04/blib/arch:/home/cwill1is/blead/.cpanplus/5.11.0/build/Device-SerialPort-1.04/blib PERL5_CPANPLUS_IS_RUNNING = 49852 PERL5_CPANPLUS_IS_VERSION = 0.84 PERL_MM_USE_DEFAULT = 1 PROCESSOR_IDENTIFIER = x86 Family 15 Model 1 Stepping 2, GenuineIntel SHELL = /bin/sh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cwill1is/blead/bin/perl5.11.0.exe UID: $< = 11964 EUID: $> = 11964 GID: $( = 10513 544 545 1003 1026 10512 10513 35917 10519 12222 51275 47366 11814 11812 11265 14694 13857 44594 44599 19834 18930 49232 47137 46503 EGID: $) = 10513 544 545 1003 1026 10512 10513 35917 10519 12222 51275 47366 11814 11812 11265 14694 13857 44594 44599 19834 18930 49232 47137 46503 ------------------------------- -- Summary of my perl5 (revision 5 version 11 subversion 0 patch 32864) configuration: Platform: osname=cygwin, osvers=1.5.24(0.15642), archname=cygwin-thread-multi-64int uname='cygwin_nt-5.2 citu003 1.5.24(0.15642) 2007-01-31 10:57 i686 cygwin ' config_args='-e -Dprefix=/home/cwill1is/blead -Dusethreads -Duse64bitint -Dusemymalloc=n' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-DPERL_USE_SAFE_PUTENV -U__STRICT_ANSI__ -fno-strict-aliasing -pipe -I/usr/local/include', optimize='-O2', cppflags='-DPERL_USE_SAFE_PUTENV -U__STRICT_ANSI__ -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='3.4.4 (cygming special, gdc 0.12, using dmd 0.125)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='g++', ldflags =' -Wl,--enable-auto-import -Wl,--export-all-symbols -Wl,--stack,8388608 -Wl,--enable-auto-image-base -Wl,--enable-auto-import -L/usr/local/lib' libpth=/usr/local/lib /usr/lib /lib libs=-lgdbm -ldb -ldl -lcrypt -lgdbm_compat perllibs=-ldl -lcrypt -lgdbm_compat libc=/usr/lib/libc.a, so=dll, useshrplib=true, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' -s' cccdlflags=' ', lddlflags=' --shared -Wl,--enable-auto-import -Wl,--export-all-symbols -Wl,--stack,8388608 -Wl,--enable-auto-image-base -Wl,--enable-auto-import -L/usr/local/lib'
