This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear MCMAHON, This is a computer-generated error report created automatically by CPANPLUS, version 0.84. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Mon Jan 7 06:43:14 2008] Trying to get 'http://www.cpan.org/authors/id/M/MC/MCMAHON/CHECKSUMS' [MSG] [Mon Jan 7 06:43:15 2008] Checksum matches for 'Acme-Geo-Whitwell-Name-0.01.tar.gz' [MSG] [Mon Jan 7 06:43:16 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/' [MSG] [Mon Jan 7 06:43:16 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/.cvsignore' [MSG] [Mon Jan 7 06:43:16 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/Changes' [MSG] [Mon Jan 7 06:43:16 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/lib/' [MSG] [Mon Jan 7 06:43:16 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/lib/Acme/' [MSG] [Mon Jan 7 06:43:16 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/lib/Acme/Geo/' [MSG] [Mon Jan 7 06:43:16 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/lib/Acme/Geo/Whitwell/' [MSG] [Mon Jan 7 06:43:16 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/lib/Acme/Geo/Whitwell/Name.pm' [MSG] [Mon Jan 7 06:43:16 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/Makefile.PL' [MSG] [Mon Jan 7 06:43:16 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/MANIFEST' [MSG] [Mon Jan 7 06:43:16 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/META.yml' [MSG] [Mon Jan 7 06:43:16 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/README' [MSG] [Mon Jan 7 06:43:16 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/t/' [MSG] [Mon Jan 7 06:43:16 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/t/00-load.t' [MSG] [Mon Jan 7 06:43:16 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/t/boilerplate.t' [MSG] [Mon Jan 7 06:43:16 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/t/build.t' [MSG] [Mon Jan 7 06:43:16 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/t/coord_for.t' [MSG] [Mon Jan 7 06:43:16 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/t/exceptions.t' [MSG] [Mon Jan 7 06:43:16 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/t/pod-coverage.t' [MSG] [Mon Jan 7 06:43:16 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/t/pod.t' [MSG] [Mon Jan 7 06:43:16 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/t/two_decimal.t' [MSG] [Mon Jan 7 06:43:16 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/t/whitwell.t' [MSG] [Mon Jan 7 06:43:16 2008] Extracted 'Acme::Geo::Whitwell::Name' to '/home/cpan/perl510/.cpanplus/5.10.0/build/Acme-Geo-Whitwell-Name-0.01' [MSG] [Mon Jan 7 06:43:17 2008] Checking if your kit is complete... Looks good Writing Makefile for Acme::Geo::Whitwell::Name [MSG] [Mon Jan 7 06:43:17 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Jan 7 06:43:19 2008] cp lib/Acme/Geo/Whitwell/Name.pm blib/lib/Acme/Geo/Whitwell/Name.pm Manifying blib/man3/Acme::Geo::Whitwell::Name.3 [ERROR] [Mon Jan 7 06:43:21 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/perl510/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00-load.........# Testing Acme::Geo::Whitwell::Name 0.01, Perl 5.010000, /home/cpan/perl510/bin/perl ok t/boilerplate.....ok t/build...........ok t/coord_for.......Can't locate Test/Exception.pm in @INC (@INC contains: /home/cpan/perl510/.cpanplus/5.10.0/build/Acme-Geo-Whitwell-Name-0.01/blib/lib /home/cpan/perl510/.cpanplus/5.10.0/build/Acme-Geo-Whitwell-Name-0.01/blib/arch /home/cpan/perl510/.cpanplus/5.10.0/build/Acme-Geo-Whitwell-Name-0.01/blib /home/cpan/perl510/lib/5.10.0/i386-netbsd-thread-multi-64int /home/cpan/perl510/lib/5.10.0/i386-netbsd-thread-multi-64int /home/cpan/perl510/lib/5.10.0 /home/cpan/perl510/lib/site_perl/5.10.0/i386-netbsd-thread-multi-64int /home/cpan/perl510/lib/site_perl/5.10.0/i386-netbsd-thread-multi-64int /home/cpan/perl510/lib/site_perl/5.10.0 . /home/cpan/perl510/lib/5.10.0/i386-netbsd-thread-multi-64int /home/cpan/perl510/lib/5.10.0 /home/cpan/perl510/lib/site_perl/5.10.0/i386-netbsd-thread-multi-64int /home/cpan/perl510/lib/site_perl/5.10.0 .) at t/coord_for.t line 2. BEGIN failed--compilation aborted at t/coord_for.t line 2. # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) t/exceptions......Can't locate Test/Exception.pm in @INC (@INC contains: /home/cpan/perl510/.cpanplus/5.10.0/build/Acme-Geo-Whitwell-Name-0.01/blib/lib /home/cpan/perl510/.cpanplus/5.10.0/build/Acme-Geo-Whitwell-Name-0.01/blib/arch /home/cpan/perl510/.cpanplus/5.10.0/build/Acme-Geo-Whitwell-Name-0.01/blib /home/cpan/perl510/lib/5.10.0/i386-netbsd-thread-multi-64int /home/cpan/perl510/lib/5.10.0/i386-netbsd-thread-multi-64int /home/cpan/perl510/lib/5.10.0 /home/cpan/perl510/lib/site_perl/5.10.0/i386-netbsd-thread-multi-64int /home/cpan/perl510/lib/site_perl/5.10.0/i386-netbsd-thread-multi-64int /home/cpan/perl510/lib/site_perl/5.10.0 . /home/cpan/perl510/lib/5.10.0/i386-netbsd-thread-multi-64int /home/cpan/perl510/lib/5.10.0 /home/cpan/perl510/lib/site_perl/5.10.0/i386-netbsd-thread-multi-64int /home/cpan/perl510/lib/site_perl/5.10.0 .) at t/exceptions.t line 2. BEGIN failed--compilation aborted at t/exceptions.t line 2. # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-10 Failed 10/10 tests, 0.00% okay t/pod-coverage....skipped all skipped: Test::Pod::Coverage 1.08 required for testing POD coverage t/pod.............skipped all skipped: Test::Pod 1.22 required for testing POD t/two_decimal.....Can't locate Test/Exception.pm in @INC (@INC contains: /home/cpan/perl510/.cpanplus/5.10.0/build/Acme-Geo-Whitwell-Name-0.01/blib/lib /home/cpan/perl510/.cpanplus/5.10.0/build/Acme-Geo-Whitwell-Name-0.01/blib/arch /home/cpan/perl510/.cpanplus/5.10.0/build/Acme-Geo-Whitwell-Name-0.01/blib /home/cpan/perl510/lib/5.10.0/i386-netbsd-thread-multi-64int /home/cpan/perl510/lib/5.10.0/i386-netbsd-thread-multi-64int /home/cpan/perl510/lib/5.10.0 /home/cpan/perl510/lib/site_perl/5.10.0/i386-netbsd-thread-multi-64int /home/cpan/perl510/lib/site_perl/5.10.0/i386-netbsd-thread-multi-64int /home/cpan/perl510/lib/site_perl/5.10.0 . /home/cpan/perl510/lib/5.10.0/i386-netbsd-thread-multi-64int /home/cpan/perl510/lib/5.10.0 /home/cpan/perl510/lib/site_perl/5.10.0/i386-netbsd-thread-multi-64int /home/cpan/perl510/lib/site_perl/5.10.0 .) at t/two_decimal.t line 2. BEGIN failed--compilation aborted at t/two_decimal.t line 2. # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-72 Failed 72/72 tests, 0.00% okay t/whitwell........ok Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/coord_for.t 255 65280 ?? ?? ?? t/exceptions.t 255 65280 10 20 1-10 t/two_decimal.t 255 65280 72 144 1-72 2 tests skipped. Failed 3/9 test scripts. 82/138 subtests failed. Files=9, Tests=138, 1 wallclock secs ( 1.00 cusr + 0.16 csys = 1.16 CPU) Failed 3/9 test programs. 82/138 subtests failed. gmake: *** [test_dynamic] Error 255 [MSG] [Mon Jan 7 06:43:21 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Test::Exception As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'MCMAHON ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Test::Exception' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Test::More 0.72 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin PERL5LIB = :/home/cpan/perl510/.cpanplus/5.10.0/build/Acme-Geo-Whitwell-Name-0.01/blib/lib:/home/cpan/perl510/.cpanplus/5.10.0/build/Acme-Geo-Whitwell-Name-0.01/blib/arch:/home/cpan/perl510/.cpanplus/5.10.0/build/Acme-Geo-Whitwell-Name-0.01/blib PERL5_CPANPLUS_IS_RUNNING = 17577 PERL5_CPANPLUS_IS_VERSION = 0.84 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/pkg/bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cpan/perl510/bin/perl UID: $< = 1002 EUID: $> = 1002 GID: $( = 100 100 EGID: $) = 100 100 ------------------------------- -- Summary of my perl5 (revision 5 version 10 subversion 0) configuration: Platform: osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int uname='netbsd canker.bingosnet.co.uk 3.1 netbsd 3.1 (generic_laptop) #0: tue oct 31 04:32:05 utc 2006 [EMAIL PROTECTED]:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric_laptop i386 ' config_args='-e -Dprefix=/home/cpan/perl510/ -Dusethreads -Duse64bitint -Dusemymalloc=n' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include', optimize='-O', cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include' ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib' libpth=/usr/pkg/lib /lib /usr/lib libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E ' cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
