This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear CHOCOLATE, This is a computer-generated error report created automatically by CPANPLUS, version 0.84. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'fetch': [MSG] [Wed Jan 9 13:58:39 2008] Trying to get 'http://www.cpan.org/authors/id/C/CH/CHOCOLATE/Scalar-Util-Clone-0.10.tar.gz' [MSG] [Wed Jan 9 13:58:45 2008] Trying to get 'http://www.cpan.org/authors/id/C/CH/CHOCOLATE/CHECKSUMS' [MSG] [Wed Jan 9 13:58:45 2008] Checksum matches for 'Scalar-Util-Clone-0.10.tar.gz' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/t/' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/t/weakref.t' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/t/io.t' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/t/01_compile.t' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/t/tied.t' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/t/clone.t' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/t/regex.t' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/t/coderef.t' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/t/pod.t' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/t/hashref.t' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/t/scalar.t' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/lib/' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/lib/Scalar/' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/lib/Scalar/Util/' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/lib/Scalar/Util/Clone.pm' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/META.yml' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/Makefile.PL' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/README' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/Clone.xs' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/Changes' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/MANIFEST' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/ptable.h' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar-Util-Clone-0.10/ppport.h' [MSG] [Wed Jan 9 13:58:46 2008] Extracted 'Scalar::Util::Clone' to '/home/chris/blead/.cpanplus/5.11.0/build/Scalar-Util-Clone-0.10' [MSG] [Wed Jan 9 13:58:47 2008] Checking if your kit is complete... Looks good Writing Makefile for Scalar::Util::Clone [MSG] [Wed Jan 9 13:58:47 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [ERROR] [Wed Jan 9 13:58:53 2008] MAKE failed: Illegal seek cp lib/Scalar/Util/Clone.pm blib/lib/Scalar/Util/Clone.pm /home/chris/blead/bin/perl5.11.0 /home/chris/blead/lib/perl5/5.11.0/ExtUtils/xsubpp -typemap /home/chris/blead/lib/perl5/5.11.0/ExtUtils/typemap Clone.xs > Clone.xsc && mv Clone.xsc Clone.c cc -c -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -Wall -DVERSION=\"0.10\" -DXS_VERSION=\"0.10\" -fPIC "-I/home/chris/blead/lib/perl5/5.11.0/alpha-linux-thread-multi/CORE" Clone.c Clone.xs: In function âshare_hek_flagsâ: Clone.xs:169: error: âXPVHVâ has no member named âxhv_arrayâ Clone.xs: In function ânew_heâ: Clone.xs:207: error: âPL_he_rootâ undeclared (first use in this function) Clone.xs:207: error: (Each undeclared identifier is reported only once Clone.xs:207: error: for each function it appears in.) Clone.xs: In function âmore_heâ: Clone.xs:220: error: âXPVâ has no member named âxpv_pvâ Clone.xs:220: error: âPL_he_arenarootâ undeclared (first use in this function) Clone.xs:225: error: âPL_he_rootâ undeclared (first use in this function) Clone.xs: In function âclone_svâ: Clone.xs:392: error: âSVs_PADBUSYâ undeclared (first use in this function) Clone.xs:406: error: duplicate case value Clone.xs:394: error: previously used here Clone.xs:461: error: duplicate case value Clone.xs:439: error: previously used here Clone.xs:509: warning: implicit declaration of function âAvFLAGSâ Clone.xs:509: error: invalid lvalue in assignment Clone.xs:554: error: âXPVHVâ has no member named âxhv_arrayâ Clone.xs:557: error: âXPVHVâ has no member named âxhv_arrayâ Clone.xs:558: error: âXPVHVâ has no member named âxhv_arrayâ Clone.xs:563: error: âXPVHVâ has no member named âxhv_eiterâ Clone.xs:563: error: âXPVHVâ has no member named âxhv_eiterâ Clone.xs:564: error: âXPVHVâ has no member named âxhv_eiterâ Clone.xs:578: warning: implicit declaration of function âHvPMROOTâ Clone.xs:578: error: invalid lvalue in assignment Clone.xs:579: error: invalid lvalue in assignment make: *** [Clone.o] Error 1 PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Scalar::Util 1.19 1.01 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 LANG = en_GB.UTF-8 PATH = /usr/local/bin:/usr/bin:/bin:/usr/games PERL5_CPANPLUS_IS_RUNNING = 18206 PERL5_CPANPLUS_IS_VERSION = 0.84 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/chris/blead/bin/perl5.11.0 UID: $< = 1000 EUID: $> = 1000 GID: $( = 1000 20 24 25 29 44 46 1000 EGID: $) = 1000 20 24 25 29 44 46 1000 ------------------------------- -- Summary of my perl5 (revision 5 version 11 subversion 0 patch 32908) configuration: Platform: osname=linux, osvers=2.6.18-5-alpha-generic, archname=alpha-linux-thread-multi uname='linux debbie 2.6.18-5-alpha-generic #1 tue oct 2 23:07:38 utc 2007 alpha gnulinux ' config_args='-e -Dusedevel -Dprefix=/home/chris/blead -Dusethreads -Dusemymalloc=n' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=define, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8 ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
