This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear KIMRYAN,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Sat Jan 12 10:00:52 2008] Trying to get 
'http://www.cpan.org/authors/id/K/KI/KIMRYAN/Locale-SubCountry-1.39.tar.gz'
[MSG] [Sat Jan 12 10:00:56 2008] Trying to get 
'http://www.cpan.org/authors/id/K/KI/KIMRYAN/CHECKSUMS'
[MSG] [Sat Jan 12 10:00:57 2008] Checksum matches for 
'Locale-SubCountry-1.39.tar.gz'
[MSG] [Sat Jan 12 10:00:58 2008] Extracted 'Locale-SubCountry-1.39/'
[MSG] [Sat Jan 12 10:00:58 2008] Extracted 'Locale-SubCountry-1.39/Changes'
[MSG] [Sat Jan 12 10:00:58 2008] Extracted 'Locale-SubCountry-1.39/lib/'
[MSG] [Sat Jan 12 10:00:58 2008] Extracted 'Locale-SubCountry-1.39/lib/Locale/'
[MSG] [Sat Jan 12 10:00:58 2008] Extracted 
'Locale-SubCountry-1.39/lib/Locale/SubCountry.pm'
[MSG] [Sat Jan 12 10:00:58 2008] Extracted 'Locale-SubCountry-1.39/Makefile.PL'
[MSG] [Sat Jan 12 10:00:58 2008] Extracted 'Locale-SubCountry-1.39/MANIFEST'
[MSG] [Sat Jan 12 10:00:58 2008] Extracted 'Locale-SubCountry-1.39/META.yml'
[MSG] [Sat Jan 12 10:00:58 2008] Extracted 'Locale-SubCountry-1.39/README'
[MSG] [Sat Jan 12 10:00:58 2008] Extracted 'Locale-SubCountry-1.39/t/'
[MSG] [Sat Jan 12 10:00:58 2008] Extracted 'Locale-SubCountry-1.39/t/main.t'
[MSG] [Sat Jan 12 10:00:58 2008] Extracted 
'Locale-SubCountry-1.39/t/pod-coverage.t'
[MSG] [Sat Jan 12 10:00:58 2008] Extracted 'Locale-SubCountry-1.39/t/pod.t'
[MSG] [Sat Jan 12 10:00:58 2008] Extracted 'Locale::SubCountry' to 
'/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Locale-SubCountry-1.39'
[MSG] [Sat Jan 12 10:01:00 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Locale::SubCountry

[MSG] [Sat Jan 12 10:01:00 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Sat Jan 12 10:01:05 2008] cp lib/Locale/SubCountry.pm 
blib/lib/Locale/SubCountry.pm
Manifying blib/man3/Locale::SubCountry.3

[ERROR] [Sat Jan 12 10:01:07 2008] MAKE TEST failed: Illegal seek 
PERL_DL_NONLAZY=1 /home/cpan/perl5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" 
"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/main..............Invalid country name: AUSTRALIA chosen at 
/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Locale-SubCountry-1.39/blib/lib/Locale/SubCountry.pm
 line 531, <DATA> line 22011.
Can't call method "code" on an undefined value at t/main.t line 16, <DATA> line 
22011.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 15/15 subtests 
t/pod-coverage......skipped: Test::Pod::Coverage 1.04 required for testing POD 
coverage
t/pod...............skipped: Test::Pod 1.14 required for testing POD

Test Summary Report
-------------------
t/main.t        (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 15 tests but ran 0.
Files=3, Tests=0,  1 wallclock secs ( 0.09 usr  0.20 sys +  0.31 cusr  0.28 
csys =  0.88 CPU)
Result: FAIL
Failed 1/3 test programs. 0/0 subtests failed.
*** Error code 255

Stop in /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Locale-SubCountry-1.39 
(line 760 of Makefile).

[MSG] [Sat Jan 12 10:01:07 2008] DEFAULT 'proceed_on_test_failure' HANDLER 
RETURNING 'sub return value'


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by 
POE::Component::CPAN::YACSmoke.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = 
/home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
    PERL5LIB = 
:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Locale-SubCountry-1.39/blib/lib:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Locale-SubCountry-1.39/blib/arch:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Locale-SubCountry-1.39/blib
    PERL5_CPANPLUS_IS_RUNNING = 9004
    PERL5_CPANPLUS_IS_VERSION = 0.84
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/ksh
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/cpan/perl5.10.0/bin/perl
    UID:  $<  = 1000
    EUID: $>  = 1000
    GID:  $(  = 1000 1000 0
    EGID: $)  = 1000 1000 0


-------------------------------


--

Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
  Platform:
    osname=openbsd, osvers=4.2, archname=OpenBSD.i386-openbsd-thread-multi-64int
    uname='openbsd wynionyn.bingosnet.co.uk 4.2 generic#375 i386 '
    config_args='-de -Dprefix=/home/cpan/perl5.10.0 -Dusethreads -Duse64bitint 
-Dusemymalloc=n'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=undef, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-pthread -fno-strict-aliasing -pipe 
-I/usr/local/include',
    optimize='-O2',
    cppflags='-pthread -fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.2'
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', 
lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags ='-pthread -Wl,-E  -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib
    libs=-lm -lutil -lc
    perllibs=-lm -lutil -lc
    libc=/usr/lib/libc.so.41.0, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
    cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC  -L/usr/local/lib'

Reply via email to