This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear ZOFFIX, This is a computer-generated error report created automatically by CPANPLUS, version 0.84. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Thu Jan 24 17:03:23 2008] Trying to get 'http://www.cpan.org/authors/id/Z/ZO/ZOFFIX/POE-Component-WebService-Validator-HTML-W3C-0.02.tar.gz' [MSG] [Thu Jan 24 17:03:25 2008] Trying to get 'http://www.cpan.org/authors/id/Z/ZO/ZOFFIX/CHECKSUMS' [MSG] [Thu Jan 24 17:03:26 2008] Checksum matches for 'POE-Component-WebService-Validator-HTML-W3C-0.02.tar.gz' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/examples/' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/examples/val.pl' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/Makefile.PL' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/META.yml' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/Changes' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/README' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/t/' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/t/98_pod_coverage.t' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/t/03_method_other_session.t' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/t/test1.html' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/t/02_method_same_session.t' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/t/06_val_errors_and_special_args.t' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/t/05_event_other_session.t' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/t/99_pod.t' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/t/01_initializing.t' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/t/04_event_same_session.t' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/lib/' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/lib/POE/' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/lib/POE/Component/' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/lib/POE/Component/WebService/' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/lib/POE/Component/WebService/Validator/' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/lib/POE/Component/WebService/Validator/HTML/' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/lib/POE/Component/WebService/Validator/HTML/W3C.pm' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE-Component-WebService-Validator-HTML-W3C-0.02/MANIFEST' [MSG] [Thu Jan 24 17:03:26 2008] Extracted 'POE::Component::WebService::Validator::HTML::W3C' to '/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-WebService-Validator-HTML-W3C-0.02' [MSG] [Thu Jan 24 17:03:28 2008] ########################################################### ########################################################### NOTE: Validation tests will require you to have access to a W3C HTML validator. It may be a LOCAL version, you will be prompted for a URI to a different validator later. Do you want to perform validation tests? [Y/n]: [y] y ************************************************************* By default I will use http://validator.w3.org/check validator to perform the tests. If you want to use a different one (perhaps the one installed locally) Now it is your chance to give me a link to its CGI Validator URI: [http://validator.w3.org/check] http://validator.w3.org/check Checking if your kit is complete... Looks good Writing Makefile for POE::Component::WebService::Validator::HTML::W3C [MSG] [Thu Jan 24 17:03:28 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Thu Jan 24 17:03:28 2008] Module 'POE::Component::WebService::Validator::HTML::W3C' requires 'POE' version '0.9999' to be installed [MSG] [Thu Jan 24 17:03:28 2008] Module 'POE::Component::WebService::Validator::HTML::W3C' requires 'POE::Filter::Line' version '1.192' to be installed [MSG] [Thu Jan 24 17:03:28 2008] Module 'POE::Component::WebService::Validator::HTML::W3C' requires 'POE::Filter::Reference' version '1.2187' to be installed [MSG] [Thu Jan 24 17:03:28 2008] Module 'POE::Component::WebService::Validator::HTML::W3C' requires 'POE::Wheel::Run' version '1.2179' to be installed [MSG] [Thu Jan 24 17:03:28 2008] Module 'POE::Component::WebService::Validator::HTML::W3C' requires 'WebService::Validator::HTML::W3C' version '0.22' to be installed [MSG] [Thu Jan 24 17:03:29 2008] ==================================================================== Assuming --default because standard input is not a terminal. ==================================================================== Some of POE's tests require a functional network. You can skip these tests if you'd like. Would you like to skip the network tests? [n] n *** Some optional features may not be available: *** Curses 1.08 could not be loaded. *** Event 1 could not be loaded. *** Gtk 0.7009 could not be loaded. *** Socket6 0.14 could not be loaded. *** Tk 800.027 could not be loaded. Writing Makefile for POE [MSG] [Thu Jan 24 17:03:31 2008] Manifying blib/man3/POE::Resource::SIDs.3 Manifying blib/man3/POE::Filter::RecordBlock.3 Manifying blib/man3/POE::Pipe.3 Manifying blib/man3/POE::Filter::Map.3 Manifying blib/man3/POE::API::ResLoader.3 Manifying blib/man3/POE::Filter::HTTPD.3 Manifying blib/man3/POE::Loop::Gtk.3 Manifying blib/man3/POE::Driver.3 Manifying blib/man3/POE::Resource::Events.3 Manifying blib/man3/POE::Loop::Tk.3 Manifying blib/man3/POE::Filter.3 Manifying blib/man3/POE::Queue::Array.3 Manifying blib/man3/POE::Loop::PerlSignals.3 Manifying blib/man3/POE::Wheel::ListenAccept.3 Manifying blib/man3/POE::Resource::Statistics.3 Manifying blib/man3/POE::Wheel::ReadWrite.3 Manifying blib/man3/POE::Wheel::Curses.3 Manifying blib/man3/POE::Loop::Event.3 Manifying blib/man3/POE.3 Manifying blib/man3/POE::Resource::FileHandles.3 Manifying blib/man3/POE::Loop::TkCommon.3 Manifying blib/man3/POE::API::Ctl.3 Manifying blib/man3/POE::Driver::SysRW.3 Manifying blib/man3/POE::Pipe::TwoWay.3 Manifying blib/man3/POE::Filter::Stream.3 Manifying blib/man3/POE::Pipe::OneWay.3 Manifying blib/man3/POE::Filter::Grep.3 Manifying blib/man3/POE::Filter::Reference.3 Manifying blib/man3/POE::Filter::Block.3 Manifying blib/man3/POE::Filter::Stackable.3 Manifying blib/man3/POE::Wheel::SocketFactory.3 Manifying blib/man3/POE::Component::Server::TCP.3 Manifying blib/man3/POE::Loop::TkActiveState.3 Manifying blib/man3/POE::Filter::Line.3 Manifying blib/man3/POE::Loop::Select.3 Manifying blib/man3/POE::NFA.3 Manifying blib/man3/POE::Component.3 Manifying blib/man3/POE::Resource::Controls.3 Manifying blib/man3/POE::Session.3 Manifying blib/man3/POE::Component::Client::TCP.3 Manifying blib/man3/POE::Kernel.3 Manifying blib/man3/POE::Resources.3 Manifying blib/man3/POE::Resource::Aliases.3 Manifying blib/man3/POE::Resource::Extrefs.3 Manifying blib/man3/POE::Resource::Sessions.3 Manifying blib/man3/POE::Wheel::FollowTail.3 Manifying blib/man3/POE::Loop.3 Manifying blib/man3/POE::Loop::IO_Poll.3 Manifying blib/man3/POE::Wheel::Run.3 Manifying blib/man3/POE::Resource.3 Manifying blib/man3/POE::Queue.3 Manifying blib/man3/POE::Wheel::ReadLine.3 Manifying blib/man3/POE::Resource::Signals.3 Manifying blib/man3/POE::Wheel.3 [MSG] [Thu Jan 24 17:07:37 2008] MAKE TEST passed: t/10_units/01_pod/01_pod.......................ok t/10_units/01_pod/02_pod_coverage..............skipped: Test::Pod::Coverage 1.08 required for testing POD coverage t/10_units/02_pipes/01_base....................skipped: not implemented yet t/10_units/02_pipes/02_oneway..................ok t/10_units/02_pipes/03_twoway..................ok t/10_units/03_base/01_poe......................ok t/10_units/03_base/02_api_ctl..................ok t/10_units/03_base/02_api_resloader............ok t/10_units/03_base/03_component................ok t/10_units/03_base/04_driver...................ok t/10_units/03_base/05_filter...................ok t/10_units/03_base/06_loop.....................ok t/10_units/03_base/07_queue....................ok t/10_units/03_base/08_resource.................ok t/10_units/03_base/09_resources................ok t/10_units/03_base/10_wheel....................ok t/10_units/03_base/11_assert_usage.............ok t/10_units/03_base/12_assert_retval............ok t/10_units/03_base/13_assert_data..............ok t/10_units/03_base/14_kernel...................ok t/10_units/03_base/15_kernel_internal..........ok t/10_units/03_base/16_explicit_loop............ok t/10_units/03_base/17_explicit_loop_fail.......ok t/10_units/04_drivers/01_sysrw.................ok t/10_units/05_filters/01_block.................ok t/10_units/05_filters/02_grep..................ok t/10_units/05_filters/03_http..................ok t/10_units/05_filters/04_line..................ok t/10_units/05_filters/05_map...................ok t/10_units/05_filters/06_recordblock...........ok t/10_units/05_filters/07_reference.............ok t/10_units/05_filters/08_stream................ok t/10_units/05_filters/50_stackable.............ok t/10_units/05_filters/99_filterchange..........ok t/10_units/06_queues/01_array..................ok t/10_units/07_exceptions/01_normal.............ok t/10_units/07_exceptions/02_turn_off...........ok t/10_units/07_exceptions/03_not_handled........ok t/20_resources/10_perl/aliases.................ok t/20_resources/10_perl/caller_state............ok t/20_resources/10_perl/controls................ok t/20_resources/10_perl/events..................ok t/20_resources/10_perl/extrefs.................ok t/20_resources/10_perl/extrefs_gc..............ok t/20_resources/10_perl/filehandles.............ok t/20_resources/10_perl/sessions................ok t/20_resources/10_perl/sids....................ok t/20_resources/10_perl/signals.................ok t/20_resources/10_perl/statistics..............skipped: not implemented yet t/30_loops/10_select/all_errors................skipped: most of these should move into other test files t/30_loops/10_select/comp_tcp..................ok t/30_loops/10_select/comp_tcp_concurrent.......# You might see a 'disconnect' error during this test. # It may be ignored. ok t/30_loops/10_select/k_alarms..................ok t/30_loops/10_select/k_aliases.................ok t/30_loops/10_select/k_detach..................ok t/30_loops/10_select/k_selects.................ok t/30_loops/10_select/k_sig_child...............# Waiting 2 seconds for child processes to settle. ok t/30_loops/10_select/k_signals.................# Waiting 2 seconds for child processes to settle. ok t/30_loops/10_select/k_signals_rerun...........ok t/30_loops/10_select/sbk_signal_init...........ok t/30_loops/10_select/ses_nfa...................ok t/30_loops/10_select/ses_session...............ok t/30_loops/10_select/wheel_accept..............ok t/30_loops/10_select/wheel_curses..............skipped: Curses not available t/30_loops/10_select/wheel_readline............skipped: not running in a terminal t/30_loops/10_select/wheel_readwrite...........ok t/30_loops/10_select/wheel_run.................STDIN is not a terminal. Can't set slave pty's window size at t/30_loops/00_base/wheel_run.pm line 248 STDIN is not a terminal. Can't set slave pty's window size at t/30_loops/00_base/wheel_run.pm line 248 STDIN is not a terminal. Can't set slave pty's window size at t/30_loops/00_base/wheel_run.pm line 248 STDIN is not a terminal. Can't set slave pty's window size at t/30_loops/00_base/wheel_run.pm line 248 ok t/30_loops/10_select/wheel_sf_ipv6.............skipped: Socket6 is needed for IPv6 tests t/30_loops/10_select/wheel_sf_tcp..............ok t/30_loops/10_select/wheel_sf_udp..............ok t/30_loops/10_select/wheel_sf_unix.............ok t/30_loops/10_select/wheel_tail................ok t/30_loops/20_poll/all_errors..................skipped: most of these should move into other test files t/30_loops/20_poll/comp_tcp....................ok t/30_loops/20_poll/comp_tcp_concurrent.........# You might see a 'disconnect' error during this test. # It may be ignored. ok t/30_loops/20_poll/k_alarms....................ok t/30_loops/20_poll/k_aliases...................ok t/30_loops/20_poll/k_detach....................ok t/30_loops/20_poll/k_selects...................ok t/30_loops/20_poll/k_sig_child.................# Waiting 2 seconds for child processes to settle. ok t/30_loops/20_poll/k_signals...................# Waiting 2 seconds for child processes to settle. ok t/30_loops/20_poll/k_signals_rerun.............ok t/30_loops/20_poll/sbk_signal_init.............ok t/30_loops/20_poll/ses_nfa.....................ok t/30_loops/20_poll/ses_session.................ok t/30_loops/20_poll/wheel_accept................ok t/30_loops/20_poll/wheel_curses................skipped: Curses not available t/30_loops/20_poll/wheel_readline..............skipped: not running in a terminal t/30_loops/20_poll/wheel_readwrite.............ok t/30_loops/20_poll/wheel_run...................STDIN is not a terminal. Can't set slave pty's window size at t/30_loops/00_base/wheel_run.pm line 248 STDIN is not a terminal. Can't set slave pty's window size at t/30_loops/00_base/wheel_run.pm line 248 STDIN is not a terminal. Can't set slave pty's window size at t/30_loops/00_base/wheel_run.pm line 248 STDIN is not a terminal. Can't set slave pty's window size at t/30_loops/00_base/wheel_run.pm line 248 ok t/30_loops/20_poll/wheel_sf_ipv6...............skipped: Socket6 is needed for IPv6 tests t/30_loops/20_poll/wheel_sf_tcp................ok t/30_loops/20_poll/wheel_sf_udp................ok t/30_loops/20_poll/wheel_sf_unix...............ok t/30_loops/20_poll/wheel_tail..................ok t/30_loops/30_event/all_errors.................skipped: Event could not be loaded t/30_loops/30_event/comp_tcp...................skipped: Event could not be loaded t/30_loops/30_event/comp_tcp_concurrent........skipped: Event could not be loaded t/30_loops/30_event/k_alarms...................skipped: Event could not be loaded t/30_loops/30_event/k_aliases..................skipped: Event could not be loaded t/30_loops/30_event/k_detach...................skipped: Event could not be loaded t/30_loops/30_event/k_selects..................skipped: Event could not be loaded t/30_loops/30_event/k_sig_child................skipped: Event could not be loaded t/30_loops/30_event/k_signals..................skipped: Event could not be loaded t/30_loops/30_event/k_signals_rerun............skipped: Event could not be loaded t/30_loops/30_event/sbk_signal_init............skipped: Event could not be loaded t/30_loops/30_event/ses_nfa....................skipped: Event could not be loaded t/30_loops/30_event/ses_session................skipped: Event could not be loaded t/30_loops/30_event/wheel_accept...............skipped: Event could not be loaded t/30_loops/30_event/wheel_curses...............skipped: Event could not be loaded t/30_loops/30_event/wheel_readline.............skipped: Event could not be loaded t/30_loops/30_event/wheel_readwrite............skipped: Event could not be loaded t/30_loops/30_event/wheel_run..................skipped: Event could not be loaded t/30_loops/30_event/wheel_sf_ipv6..............skipped: Event could not be loaded t/30_loops/30_event/wheel_sf_tcp...............skipped: Event could not be loaded t/30_loops/30_event/wheel_sf_udp...............skipped: Event could not be loaded t/30_loops/30_event/wheel_sf_unix..............skipped: Event could not be loaded t/30_loops/30_event/wheel_tail.................skipped: Event could not be loaded t/30_loops/40_gtk/all_errors...................skipped: Gtk needs a DISPLAY (set one today, okay?) t/30_loops/40_gtk/comp_tcp.....................skipped: Gtk needs a DISPLAY (set one today, okay?) t/30_loops/40_gtk/comp_tcp_concurrent..........skipped: Gtk needs a DISPLAY (set one today, okay?) t/30_loops/40_gtk/k_alarms.....................skipped: Gtk needs a DISPLAY (set one today, okay?) t/30_loops/40_gtk/k_aliases....................skipped: Gtk needs a DISPLAY (set one today, okay?) t/30_loops/40_gtk/k_detach.....................skipped: Gtk needs a DISPLAY (set one today, okay?) t/30_loops/40_gtk/k_selects....................skipped: Gtk needs a DISPLAY (set one today, okay?) t/30_loops/40_gtk/k_sig_child..................skipped: Gtk needs a DISPLAY (set one today, okay?) t/30_loops/40_gtk/k_signals....................skipped: Gtk needs a DISPLAY (set one today, okay?) t/30_loops/40_gtk/k_signals_rerun..............skipped: Gtk needs a DISPLAY (set one today, okay?) t/30_loops/40_gtk/sbk_signal_init..............skipped: Gtk needs a DISPLAY (set one today, okay?) t/30_loops/40_gtk/ses_nfa......................skipped: Gtk needs a DISPLAY (set one today, okay?) t/30_loops/40_gtk/ses_session..................skipped: Gtk needs a DISPLAY (set one today, okay?) t/30_loops/40_gtk/wheel_accept.................skipped: Gtk needs a DISPLAY (set one today, okay?) t/30_loops/40_gtk/wheel_curses.................skipped: Gtk needs a DISPLAY (set one today, okay?) t/30_loops/40_gtk/wheel_readline...............skipped: Gtk needs a DISPLAY (set one today, okay?) t/30_loops/40_gtk/wheel_readwrite..............skipped: Gtk needs a DISPLAY (set one today, okay?) t/30_loops/40_gtk/wheel_run....................skipped: Gtk needs a DISPLAY (set one today, okay?) t/30_loops/40_gtk/wheel_sf_ipv6................skipped: Gtk needs a DISPLAY (set one today, okay?) t/30_loops/40_gtk/wheel_sf_tcp.................skipped: Gtk needs a DISPLAY (set one today, okay?) t/30_loops/40_gtk/wheel_sf_udp.................skipped: Gtk needs a DISPLAY (set one today, okay?) t/30_loops/40_gtk/wheel_sf_unix................skipped: Gtk needs a DISPLAY (set one today, okay?) t/30_loops/40_gtk/wheel_tail...................skipped: Gtk needs a DISPLAY (set one today, okay?) t/30_loops/50_tk/all_errors....................skipped: Tk needs a DISPLAY (set one today, okay?) t/30_loops/50_tk/comp_tcp......................skipped: Tk needs a DISPLAY (set one today, okay?) t/30_loops/50_tk/comp_tcp_concurrent...........skipped: Tk needs a DISPLAY (set one today, okay?) t/30_loops/50_tk/k_alarms......................skipped: Tk needs a DISPLAY (set one today, okay?) t/30_loops/50_tk/k_aliases.....................skipped: Tk needs a DISPLAY (set one today, okay?) t/30_loops/50_tk/k_detach......................skipped: Tk needs a DISPLAY (set one today, okay?) t/30_loops/50_tk/k_selects.....................skipped: Tk needs a DISPLAY (set one today, okay?) t/30_loops/50_tk/k_sig_child...................skipped: Tk needs a DISPLAY (set one today, okay?) t/30_loops/50_tk/k_signals.....................skipped: Tk needs a DISPLAY (set one today, okay?) t/30_loops/50_tk/k_signals_rerun...............skipped: Tk needs a DISPLAY (set one today, okay?) t/30_loops/50_tk/sbk_signal_init...............skipped: Tk needs a DISPLAY (set one today, okay?) t/30_loops/50_tk/ses_nfa.......................skipped: Tk needs a DISPLAY (set one today, okay?) t/30_loops/50_tk/ses_session...................skipped: Tk needs a DISPLAY (set one today, okay?) t/30_loops/50_tk/wheel_accept..................skipped: Tk needs a DISPLAY (set one today, okay?) t/30_loops/50_tk/wheel_curses..................skipped: Tk needs a DISPLAY (set one today, okay?) t/30_loops/50_tk/wheel_readline................skipped: Tk needs a DISPLAY (set one today, okay?) t/30_loops/50_tk/wheel_readwrite...............skipped: Tk needs a DISPLAY (set one today, okay?) t/30_loops/50_tk/wheel_run.....................skipped: Tk needs a DISPLAY (set one today, okay?) t/30_loops/50_tk/wheel_sf_ipv6.................skipped: Tk needs a DISPLAY (set one today, okay?) t/30_loops/50_tk/wheel_sf_tcp..................skipped: Tk needs a DISPLAY (set one today, okay?) t/30_loops/50_tk/wheel_sf_udp..................skipped: Tk needs a DISPLAY (set one today, okay?) t/30_loops/50_tk/wheel_sf_unix.................skipped: Tk needs a DISPLAY (set one today, okay?) t/30_loops/50_tk/wheel_tail....................skipped: Tk needs a DISPLAY (set one today, okay?) t/90_regression/averell-callback-ret...........ok t/90_regression/broeren-win32-nbio.............skipped: This test examines ActiveState Perl behavior. t/90_regression/cfedde-filter-httpd............ok t/90_regression/ferrari-server-unix............ok t/90_regression/immute-server-tcp-filter.......ok t/90_regression/merijn-sigchld-system..........# Using '/bin/true' as our thing to run under system() ok t/90_regression/neyuki_detach..................ok t/90_regression/rt14444-arg1...................ok t/90_regression/rt1648-tied-stderr.............ok t/90_regression/rt19908-merlyn-stop............ok t/90_regression/rt23181-sigchld-rc.............ok t/90_regression/steinert-passed-wheel..........ok t/90_regression/steinert-recursive-signal......ok t/90_regression/steinert-signal-integrity......ok t/90_regression/suzman_windows.................ok t/90_regression/ton-stop-corruption............ok t/90_regression/whjackson-followtail...........ok All tests successful. Files=181, Tests=4041, 245 wallclock secs ( 1.41 usr 0.50 sys + 30.33 cusr 37.39 csys = 69.63 CPU) Result: PASS [MSG] [Thu Jan 24 17:07:37 2008] Sending test report for 'POE-0.9999' [MSG] [Thu Jan 24 17:07:37 2008] Ok, not sending test report [MSG] [Thu Jan 24 17:07:38 2008] XML::XPath is not installed. This means that you will not be able to access the full functionality of this module. However should you install XML::XPath at a later date this functionality will become available Warning: Guessing NAME [WebService-Validator-HTML-W3C] from current directory name. Writing Makefile for WebService-Validator-HTML-W3C [MSG] [Thu Jan 24 17:07:38 2008] Module 'WebService::Validator::HTML::W3C' requires 'Class::Accessor' version '0' to be installed [MSG] [Thu Jan 24 17:07:39 2008] Writing Makefile for Class::Accessor [MSG] [Thu Jan 24 17:07:39 2008] Manifying blib/man3/Class::Accessor::Faster.3 Manifying blib/man3/Class::Accessor::Fast.3 Manifying blib/man3/Class::Accessor.3 [MSG] [Thu Jan 24 17:07:41 2008] MAKE TEST passed: t/accessors.........ok t/aliases...........ok t/bestpractice......ok t/croak.............ok t/getset............ok All tests successful. Files=5, Tests=119, 1 wallclock secs ( 0.05 usr 0.04 sys + 0.39 cusr 0.65 csys = 1.13 CPU) Result: PASS [MSG] [Thu Jan 24 17:07:41 2008] Sending test report for 'Class-Accessor-0.31' [MSG] [Thu Jan 24 17:07:41 2008] Ok, not sending test report [MSG] [Thu Jan 24 17:07:42 2008] Manifying blib/man3/WebService::Validator::HTML::W3C::Error.3 Manifying blib/man3/WebService::Validator::HTML::W3C::Warning.3 Manifying blib/man3/WebService::Validator::HTML::W3C.3 [MSG] [Thu Jan 24 17:07:49 2008] MAKE TEST passed: t/01load...................ok t/02validate...............ok t/03invalid................ok t/04bad_validator..........ok t/05options................ok t/06detailed...............ok t/07no_xpath...............ok t/08no_detailed............ok t/09scalar.................ok t/10file...................ok t/11detailed_soap..........ok t/12proxy..................ok t/13soap_wrong_format......ok t/14warnings...............ok t/99_pod...................ok t/99_podcover..............skipped: Test::Pod::Coverage 0.08 required for testing POD coverage All tests successful. Files=16, Tests=83, 6 wallclock secs ( 0.08 usr 0.03 sys + 2.07 cusr 4.23 csys = 6.41 CPU) Result: PASS [MSG] [Thu Jan 24 17:07:49 2008] Sending test report for 'WebService-Validator-HTML-W3C-0.22' [MSG] [Thu Jan 24 17:07:49 2008] Ok, not sending test report [MSG] [Thu Jan 24 17:07:51 2008] cp lib/POE/Component/WebService/Validator/HTML/W3C.pm blib/lib/POE/Component/WebService/Validator/HTML/W3C.pm Manifying blib/man3/POE::Component::WebService::Validator::HTML::W3C.3 [ERROR] [Thu Jan 24 17:08:09 2008] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) t/01_initializing.....................ok t/02_method_same_session..............ok t/03_method_other_session............. # Failed test '{errors} key must have an arrayref of errors' # at t/03_method_other_session.t line 93. # got: '' # expected: 'ARRAY' # Looks like you failed 1 test of 8. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/8 subtests t/04_event_same_session............... # Failed test '{errors} key must have an arrayref of errors' # at t/04_event_same_session.t line 103. # got: '' # expected: 'ARRAY' # Looks like you failed 1 test of 8. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/8 subtests t/05_event_other_session.............. # Failed test '{errors} key must have an arrayref of errors' # at t/05_event_other_session.t line 109. # got: '' # expected: 'ARRAY' Dubious, test returned 1 (wstat 256, 0x100) Failed 1/8 subtests # Looks like you failed 1 test of 8. t/06_val_errors_and_special_args......ok t/98_pod_coverage.....................skipped: Test::Pod::Coverage 1.00 required for testing POD coverage t/99_pod..............................ok Test Summary Report ------------------- t/03_method_other_session.t (Wstat: 256 Tests: 8 Failed: 1) Failed test: 4 Non-zero exit status: 1 t/04_event_same_session.t (Wstat: 256 Tests: 8 Failed: 1) Failed test: 4 Non-zero exit status: 1 t/05_event_other_session.t (Wstat: 256 Tests: 8 Failed: 1) Failed test: 4 Non-zero exit status: 1 Files=8, Tests=48, 17 wallclock secs ( 0.03 usr 0.06 sys + 3.12 cusr 6.39 csys = 9.60 CPU) Result: FAIL Failed 3/8 test programs. 3/48 subtests failed. make: *** [test_dynamic] Error 255 [MSG] [Thu Jan 24 17:08:09 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Carp 1.04 1.04 POE 0.9999 0.9999 POE::Filter::Line 1.1920 1.192 POE::Filter::Reference 1.2187 1.2187 POE::Wheel::Run 1.2179 1.2179 Test::More 0.74 0.74 WebService::Validator::HTML::W3C 0.22 0.22 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.03. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007 x86_64 gnulinux ' config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true [EMAIL PROTECTED]' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g -O3', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8 alignbytes=16, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE' cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
