This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Andy Grundman, This is a computer-generated report for POE-Loop-EV-0.05 on perl-5.8.8, created automatically by CPAN-Reporter-1.0602 and sent to the CPAN Testers mailing list. If you have received this email directly, it is because the person testing your distribution chose to send a copy to your CPAN email address; there may be a delay before the official report is received and processed by CPAN Testers. Thank you for uploading your work to CPAN. Congratulations! All tests were successful. Sections of this report: * Tester comments * Program output * Prerequisites * Environment and other context ------------------------------ TESTER COMMENTS ------------------------------ Additional comments from tester: [none provided] ------------------------------ PROGRAM OUTPUT ------------------------------ Output from '/usr/bin/make test': /usr/bin/perl "-Iinc" Makefile.PL --config= --installdeps=EV,2.01 Cannot determine perl version info from lib/POE/Loop/EV.pm Some of POE's tests require a functional network. You can skip these tests if you'd like. Would you like to skip the network tests? [n] n PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t t/*/*/*.t t/04critic........................................skipped: Critic test only for developers. t/30_loops/60_ev_devpoll/all_errors...............skipped: EV was not built with a devpoll backend t/30_loops/60_ev_devpoll/comp_tcp.................skipped: EV was not built with a devpoll backend t/30_loops/60_ev_devpoll/comp_tcp_concurrent......skipped: EV was not built with a devpoll backend t/30_loops/60_ev_devpoll/k_alarms.................skipped: EV was not built with a devpoll backend t/30_loops/60_ev_devpoll/k_aliases................skipped: EV was not built with a devpoll backend t/30_loops/60_ev_devpoll/k_detach.................skipped: EV was not built with a devpoll backend t/30_loops/60_ev_devpoll/k_selects................skipped: EV was not built with a devpoll backend t/30_loops/60_ev_devpoll/k_sig_child..............skipped: EV was not built with a devpoll backend t/30_loops/60_ev_devpoll/k_signals................skipped: EV was not built with a devpoll backend t/30_loops/60_ev_devpoll/k_signals_rerun..........skipped: EV was not built with a devpoll backend t/30_loops/60_ev_devpoll/sbk_signal_init..........skipped: EV was not built with a devpoll backend t/30_loops/60_ev_devpoll/ses_nfa..................skipped: EV was not built with a devpoll backend t/30_loops/60_ev_devpoll/ses_session..............skipped: EV was not built with a devpoll backend t/30_loops/60_ev_devpoll/wheel_accept.............skipped: EV was not built with a devpoll backend t/30_loops/60_ev_devpoll/wheel_curses.............skipped: EV was not built with a devpoll backend t/30_loops/60_ev_devpoll/wheel_readline...........skipped: EV was not built with a devpoll backend t/30_loops/60_ev_devpoll/wheel_readwrite..........skipped: EV was not built with a devpoll backend t/30_loops/60_ev_devpoll/wheel_run................skipped: EV was not built with a devpoll backend t/30_loops/60_ev_devpoll/wheel_sf_ipv6............skipped: EV was not built with a devpoll backend t/30_loops/60_ev_devpoll/wheel_sf_tcp.............skipped: EV was not built with a devpoll backend t/30_loops/60_ev_devpoll/wheel_sf_udp.............skipped: EV was not built with a devpoll backend t/30_loops/60_ev_devpoll/wheel_sf_unix............skipped: EV was not built with a devpoll backend t/30_loops/60_ev_devpoll/wheel_tail...............skipped: EV was not built with a devpoll backend t/30_loops/60_ev_epoll/all_errors.................skipped: most of these should move into other test files t/30_loops/60_ev_epoll/comp_tcp...................ok t/30_loops/60_ev_epoll/comp_tcp_concurrent........# You might see a 'disconnect' error during this test. # It may be ignored. ok t/30_loops/60_ev_epoll/k_alarms...................ok t/30_loops/60_ev_epoll/k_aliases..................ok t/30_loops/60_ev_epoll/k_detach...................ok t/30_loops/60_ev_epoll/k_selects..................ok t/30_loops/60_ev_epoll/k_sig_child................# Waiting 2 seconds for child processes to settle. ok t/30_loops/60_ev_epoll/k_signals..................# Waiting 2 seconds for child processes to settle. ok t/30_loops/60_ev_epoll/k_signals_rerun............ok t/30_loops/60_ev_epoll/sbk_signal_init............ok t/30_loops/60_ev_epoll/ses_nfa....................ok t/30_loops/60_ev_epoll/ses_session................ok t/30_loops/60_ev_epoll/wheel_accept...............ok t/30_loops/60_ev_epoll/wheel_curses...............skipped: Need help with Curses functions blocking under ptys t/30_loops/60_ev_epoll/wheel_readline.............ok t/30_loops/60_ev_epoll/wheel_readwrite............ok t/30_loops/60_ev_epoll/wheel_run..................ok t/30_loops/60_ev_epoll/wheel_sf_ipv6..............# This test may hang if your firewall blocks IPv6 # packets across your localhost interface. ok t/30_loops/60_ev_epoll/wheel_sf_tcp...............ok t/30_loops/60_ev_epoll/wheel_sf_udp...............ok t/30_loops/60_ev_epoll/wheel_sf_unix..............ok t/30_loops/60_ev_epoll/wheel_tail.................ok t/30_loops/60_ev_kqueue/all_errors................skipped: EV was not built with a kqueue backend t/30_loops/60_ev_kqueue/comp_tcp..................skipped: EV was not built with a kqueue backend t/30_loops/60_ev_kqueue/comp_tcp_concurrent.......skipped: EV was not built with a kqueue backend t/30_loops/60_ev_kqueue/k_alarms..................skipped: EV was not built with a kqueue backend t/30_loops/60_ev_kqueue/k_aliases.................skipped: EV was not built with a kqueue backend t/30_loops/60_ev_kqueue/k_detach..................skipped: EV was not built with a kqueue backend t/30_loops/60_ev_kqueue/k_selects.................skipped: EV was not built with a kqueue backend t/30_loops/60_ev_kqueue/k_sig_child...............skipped: EV was not built with a kqueue backend t/30_loops/60_ev_kqueue/k_signals.................skipped: EV was not built with a kqueue backend t/30_loops/60_ev_kqueue/k_signals_rerun...........skipped: EV was not built with a kqueue backend t/30_loops/60_ev_kqueue/sbk_signal_init...........skipped: EV was not built with a kqueue backend t/30_loops/60_ev_kqueue/ses_nfa...................skipped: EV was not built with a kqueue backend t/30_loops/60_ev_kqueue/ses_session...............skipped: EV was not built with a kqueue backend t/30_loops/60_ev_kqueue/wheel_accept..............skipped: EV was not built with a kqueue backend t/30_loops/60_ev_kqueue/wheel_curses..............skipped: EV was not built with a kqueue backend t/30_loops/60_ev_kqueue/wheel_readline............skipped: EV was not built with a kqueue backend t/30_loops/60_ev_kqueue/wheel_readwrite...........skipped: EV was not built with a kqueue backend t/30_loops/60_ev_kqueue/wheel_run.................skipped: EV was not built with a kqueue backend t/30_loops/60_ev_kqueue/wheel_sf_ipv6.............skipped: EV was not built with a kqueue backend t/30_loops/60_ev_kqueue/wheel_sf_tcp..............skipped: EV was not built with a kqueue backend t/30_loops/60_ev_kqueue/wheel_sf_udp..............skipped: EV was not built with a kqueue backend t/30_loops/60_ev_kqueue/wheel_sf_unix.............skipped: EV was not built with a kqueue backend t/30_loops/60_ev_kqueue/wheel_tail................skipped: EV was not built with a kqueue backend t/30_loops/60_ev_poll/all_errors..................skipped: most of these should move into other test files t/30_loops/60_ev_poll/comp_tcp....................ok t/30_loops/60_ev_poll/comp_tcp_concurrent.........# You might see a 'disconnect' error during this test. # It may be ignored. ok t/30_loops/60_ev_poll/k_alarms....................ok t/30_loops/60_ev_poll/k_aliases...................ok t/30_loops/60_ev_poll/k_detach....................ok t/30_loops/60_ev_poll/k_selects...................ok t/30_loops/60_ev_poll/k_sig_child.................# Waiting 2 seconds for child processes to settle. ok t/30_loops/60_ev_poll/k_signals...................# Waiting 2 seconds for child processes to settle. ok t/30_loops/60_ev_poll/k_signals_rerun.............ok t/30_loops/60_ev_poll/sbk_signal_init.............ok t/30_loops/60_ev_poll/ses_nfa.....................ok t/30_loops/60_ev_poll/ses_session.................ok t/30_loops/60_ev_poll/wheel_accept................ok t/30_loops/60_ev_poll/wheel_curses................skipped: Need help with Curses functions blocking under ptys t/30_loops/60_ev_poll/wheel_readline..............ok t/30_loops/60_ev_poll/wheel_readwrite.............ok t/30_loops/60_ev_poll/wheel_run...................ok t/30_loops/60_ev_poll/wheel_sf_ipv6...............# This test may hang if your firewall blocks IPv6 # packets across your localhost interface. ok t/30_loops/60_ev_poll/wheel_sf_tcp................ok t/30_loops/60_ev_poll/wheel_sf_udp................ok t/30_loops/60_ev_poll/wheel_sf_unix...............ok t/30_loops/60_ev_poll/wheel_tail..................ok t/30_loops/60_ev_port/all_errors..................skipped: EV was not built with a port backend t/30_loops/60_ev_port/comp_tcp....................skipped: EV was not built with a port backend t/30_loops/60_ev_port/comp_tcp_concurrent.........skipped: EV was not built with a port backend t/30_loops/60_ev_port/k_alarms....................skipped: EV was not built with a port backend t/30_loops/60_ev_port/k_aliases...................skipped: EV was not built with a port backend t/30_loops/60_ev_port/k_detach....................skipped: EV was not built with a port backend t/30_loops/60_ev_port/k_selects...................skipped: EV was not built with a port backend t/30_loops/60_ev_port/k_sig_child.................skipped: EV was not built with a port backend t/30_loops/60_ev_port/k_signals...................skipped: EV was not built with a port backend t/30_loops/60_ev_port/k_signals_rerun.............skipped: EV was not built with a port backend t/30_loops/60_ev_port/sbk_signal_init.............skipped: EV was not built with a port backend t/30_loops/60_ev_port/ses_nfa.....................skipped: EV was not built with a port backend t/30_loops/60_ev_port/ses_session.................skipped: EV was not built with a port backend t/30_loops/60_ev_port/wheel_accept................skipped: EV was not built with a port backend t/30_loops/60_ev_port/wheel_curses................skipped: EV was not built with a port backend t/30_loops/60_ev_port/wheel_readline..............skipped: EV was not built with a port backend t/30_loops/60_ev_port/wheel_readwrite.............skipped: EV was not built with a port backend t/30_loops/60_ev_port/wheel_run...................skipped: EV was not built with a port backend t/30_loops/60_ev_port/wheel_sf_ipv6...............skipped: EV was not built with a port backend t/30_loops/60_ev_port/wheel_sf_tcp................skipped: EV was not built with a port backend t/30_loops/60_ev_port/wheel_sf_udp................skipped: EV was not built with a port backend t/30_loops/60_ev_port/wheel_sf_unix...............skipped: EV was not built with a port backend t/30_loops/60_ev_port/wheel_tail..................skipped: EV was not built with a port backend t/30_loops/60_ev_select/all_errors................skipped: most of these should move into other test files t/30_loops/60_ev_select/comp_tcp..................ok t/30_loops/60_ev_select/comp_tcp_concurrent.......# You might see a 'disconnect' error during this test. # It may be ignored. ok t/30_loops/60_ev_select/k_alarms..................ok t/30_loops/60_ev_select/k_aliases.................ok t/30_loops/60_ev_select/k_detach..................ok t/30_loops/60_ev_select/k_selects.................ok t/30_loops/60_ev_select/k_sig_child...............# Waiting 2 seconds for child processes to settle. ok t/30_loops/60_ev_select/k_signals.................# Waiting 2 seconds for child processes to settle. ok t/30_loops/60_ev_select/k_signals_rerun...........ok t/30_loops/60_ev_select/sbk_signal_init...........ok t/30_loops/60_ev_select/ses_nfa...................ok t/30_loops/60_ev_select/ses_session...............ok t/30_loops/60_ev_select/wheel_accept..............ok t/30_loops/60_ev_select/wheel_curses..............skipped: Need help with Curses functions blocking under ptys t/30_loops/60_ev_select/wheel_readline............ok t/30_loops/60_ev_select/wheel_readwrite...........ok t/30_loops/60_ev_select/wheel_run.................ok t/30_loops/60_ev_select/wheel_sf_ipv6.............# This test may hang if your firewall blocks IPv6 # packets across your localhost interface. ok t/30_loops/60_ev_select/wheel_sf_tcp..............ok t/30_loops/60_ev_select/wheel_sf_udp..............ok t/30_loops/60_ev_select/wheel_sf_unix.............ok t/30_loops/60_ev_select/wheel_tail................ok All tests successful. Files=139, Tests=1317, 243 wallclock secs ( 2.50 usr 0.44 sys + 109.18 cusr 20.73 csys = 132.85 CPU) Result: PASS ------------------------------ PREREQUISITES ------------------------------ Prerequisite modules loaded: requires: Module Need Have ---------- ------ ------ EV 2.01 2.01 POE 0.9999 0.9999 Test::More 0.47 0.74 ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: DBIC_NO_WARN_BAD_PERL = 1 LANG = en_US.UTF-8 PATH = /usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/icerider70/bin PERL5LIB = /home/icerider70/.cpan/build/EV-2.01-MaVhzF/blib/arch:/home/icerider70/.cpan/build/EV-2.01-MaVhzF/blib/lib:/home/icerider70/.cpan/build/Statistics-Test-WilcoxonRankSum-0.0.1-1RW_ot/blib/arch:/home/icerider70/.cpan/build/Statistics-Test-WilcoxonRankSum-0.0.1-1RW_ot/blib/lib:/home/icerider70/.cpan/build/Math-Counting-0.0704-XBFNIA/blib/arch:/home/icerider70/.cpan/build/Math-Counting-0.0704-XBFNIA/blib/lib:/home/icerider70/.cpan/build/Set-Partition-0.03-2jh5Kp/blib/arch:/home/icerider70/.cpan/build/Set-Partition-0.03-2jh5Kp/blib/lib:/home/icerider70/.cpan/build/Class-Std-v0.0.8-1DiAJN/blib/arch:/home/icerider70/.cpan/build/Class-Std-v0.0.8-1DiAJN/blib/lib:/home/icerider70/.cpan/build/Amazon-S3-0.41.2-hXsCeE/blib/arch:/home/icerider70/.cpan/build/Amazon-S3-0.41.2-hXsCeE/blib/lib:/home/icerider70/.cpan/build/Digest-MD5-File-0.06-JLs2BF/blib/arch:/home/icerider70/.cpan/build/Digest-MD5-File-0.06-JLs2BF/blib/lib:/home/icerider70/.cpan/build/Encode-JP-Mobile-0.24-kHqxn 2/blib/arch:/home/icerider70/.cpan/build/Encode-JP-Mobile-0.24-kHqxn2/blib/lib:/home/icerider70/.cpan/build/File-ShareDir-0.05-NJrghQ/blib/arch:/home/icerider70/.cpan/build/File-ShareDir-0.05-NJrghQ/blib/lib:/home/icerider70/.cpan/build/Tie-CArray-0.14-mtR4Bq/blib/arch:/home/icerider70/.cpan/build/Tie-CArray-0.14-mtR4Bq/blib/lib:/home/icerider70/.cpan/build/POE-Component-CPAN-YACSmoke-1.14-EVUSKZ/blib/arch:/home/icerider70/.cpan/build/POE-Component-CPAN-YACSmoke-1.14-EVUSKZ/blib/lib:/home/icerider70/.cpan/build/Convert-Scalar-1.03-6CKmrn/blib/arch:/home/icerider70/.cpan/build/Convert-Scalar-1.03-6CKmrn/blib/lib:/home/icerider70/.cpan/build/String-Similarity-1.03-X8g7kh/blib/arch:/home/icerider70/.cpan/build/String-Similarity-1.03-X8g7kh/blib/lib:/home/icerider70/.cpan/build/PApp-SQL-1.03-2gCVQI/blib/arch:/home/icerider70/.cpan/build/PApp-SQL-1.03-2gCVQI/blib/lib:/home/icerider70/.cpan/build/Crypt-Twofish2-1.01-wX5Td1/blib/arch:/home/icerider70/.cpan/build/Crypt-Twofish2-1.01 -wX5Td1/blib/lib:/home/icerider70/.cpan/build/Compress-LZF-3! .11-jZKY wz/blib/arch:/home/icerider70/.cpan/build/Compress-LZF-3.11-jZKYwz/blib/lib PERL5_CPANPLUS_IS_RUNNING = 5021 PERL5_CPAN_IS_RUNNING = 5021 PERL_AUTOINSTALL = --defaultdeps PERL_MM_USE_DEFAULT = 1 PERL_TEST_CRITIC = 1 PERL_TEST_POD = 1 SHELL = /bin/bash TERM = xterm Perl special variables (and OS-specific diagnostics, for MSWin32): $^X = /usr/bin/perl $UID/$EUID = 500 / 500 $GID = 500 500 $EGID = 500 500 Perl module toolchain versions installed: Module Have ------------------- ------ CPAN 1.9205 Cwd 3.27 ExtUtils::CBuilder 0.21 ExtUtils::Command 1.13 ExtUtils::Install 1.44 ExtUtils::MakeMaker 6.42 ExtUtils::Manifest 1.51 ExtUtils::ParseXS 2.18 File::Spec 3.27 Module::Build 0.2808 Module::Signature 0.55 Test::Harness 3.07 Test::More 0.74 YAML 0.66 YAML::Syck 1.00 version 0.74 -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.18-53.el5, archname=i386-linux-thread-multi uname='linux builder7.centos.org 2.6.9-42.0.3.elsmp #1 smp fri oct 6 06:21:39 cdt 2006 i686 i686 i386 gnulinux ' config_args='-des -Doptimize=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables -Dversion=5.8.8 -Dmyhostname=localhost [EMAIL PROTECTED] -Dcc=gcc -Dcf_by=Red Hat, Inc. -Dinstallprefix=/usr -Dprefix=/usr -Darchname=i386-linux -Dvendorprefix=/usr -Dsiteprefix=/usr -Duseshrplib -Dusethreads -Duseithreads -Duselargefiles -Dd_dosuid -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio -Dinstallusrbinperl=n -Ubincompat5005 -Uversiononly -Dpager=/usr/bin/less -isr -Dd_gethostent_r_proto -Ud_endhostent_r_proto -Ud_sethostent_r_proto -Ud_endprotoent_r_proto -Ud_setprotoent_r_proto -Ud_endservent_r_proto -Ud_setservent_r_proto -Dinc_version_list=5.8.7 5.8.6 5.8.5 -Dscriptdir=/usr/bin' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm', optimize='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables', cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -I/usr/include/gdbm' ccversion='', gccversion='4.1.1 20061011 (Red Hat 4.1.1-30)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.5.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.5' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE' cccdlflags='-fPIC', lddlflags='-shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables -L/usr/local/lib'
