This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear LAYE, This is a computer-generated error report created automatically by CPANPLUS, version 0.83_08. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Fri Jan 25 18:05:43 2008] Trying to get 'ftp://ftp.funet.fi/pub/CPAN/authors/id/L/LA/LAYE/CHECKSUMS' [MSG] [Fri Jan 25 18:05:44 2008] Checksum matches for 'Algorithm-LBFGS-0.10.tar.gz' [MSG] [Fri Jan 25 18:05:44 2008] Extracted 'Algorithm-LBFGS-0.10/' [MSG] [Fri Jan 25 18:05:44 2008] Extracted 'Algorithm-LBFGS-0.10/README' [MSG] [Fri Jan 25 18:05:44 2008] Extracted 'Algorithm-LBFGS-0.10/MANIFEST' [MSG] [Fri Jan 25 18:05:44 2008] Extracted 'Algorithm-LBFGS-0.10/t/' [MSG] [Fri Jan 25 18:05:44 2008] Extracted 'Algorithm-LBFGS-0.10/t/03-monitor.t' [MSG] [Fri Jan 25 18:05:44 2008] Extracted 'Algorithm-LBFGS-0.10/t/01-parameter.t' [MSG] [Fri Jan 25 18:05:44 2008] Extracted 'Algorithm-LBFGS-0.10/t/02-optimization.t' [MSG] [Fri Jan 25 18:05:44 2008] Extracted 'Algorithm-LBFGS-0.10/t/LBFGS.pm' [MSG] [Fri Jan 25 18:05:44 2008] Extracted 'Algorithm-LBFGS-0.10/arithmetic_sse_float.h' [MSG] [Fri Jan 25 18:05:44 2008] Extracted 'Algorithm-LBFGS-0.10/Changes' [MSG] [Fri Jan 25 18:05:44 2008] Extracted 'Algorithm-LBFGS-0.10/arithmetic_ansi.h' [MSG] [Fri Jan 25 18:05:44 2008] Extracted 'Algorithm-LBFGS-0.10/META.yml' [MSG] [Fri Jan 25 18:05:44 2008] Extracted 'Algorithm-LBFGS-0.10/Makefile.PL' [MSG] [Fri Jan 25 18:05:44 2008] Extracted 'Algorithm-LBFGS-0.10/lbfgs.h' [MSG] [Fri Jan 25 18:05:44 2008] Extracted 'Algorithm-LBFGS-0.10/arithmetic_sse_double.h' [MSG] [Fri Jan 25 18:05:44 2008] Extracted 'Algorithm-LBFGS-0.10/lib/' [MSG] [Fri Jan 25 18:05:44 2008] Extracted 'Algorithm-LBFGS-0.10/lib/Algorithm/' [MSG] [Fri Jan 25 18:05:44 2008] Extracted 'Algorithm-LBFGS-0.10/lib/Algorithm/LBFGS.pm' [MSG] [Fri Jan 25 18:05:44 2008] Extracted 'Algorithm-LBFGS-0.10/LBFGS.xs' [MSG] [Fri Jan 25 18:05:44 2008] Extracted 'Algorithm-LBFGS-0.10/lbfgs.c' [MSG] [Fri Jan 25 18:05:44 2008] Extracted 'Algorithm-LBFGS-0.10/ppport.h' [MSG] [Fri Jan 25 18:05:44 2008] Extracted 'Algorithm::LBFGS' to '/home/cpan/.cpanplus/5.8.8/build/Algorithm-LBFGS-0.10' [MSG] [Fri Jan 25 18:05:45 2008] WARNING: LICENSE is not a known parameter. Checking if your kit is complete... Looks good 'LICENSE' is not a known MakeMaker parameter name. Writing Makefile for Algorithm::LBFGS [MSG] [Fri Jan 25 18:05:45 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Jan 25 18:05:49 2008] cp lib/Algorithm/LBFGS.pm blib/lib/Algorithm/LBFGS.pm /home/cpan/perl5.08.08/bin/perl /home/cpan/perl5.08.08/lib/5.8.8/ExtUtils/xsubpp -typemap /home/cpan/perl5.08.08/lib/5.8.8/ExtUtils/typemap LBFGS.xs > LBFGS.xsc && mv LBFGS.xsc LBFGS.c Please specify prototyping behavior for LBFGS.xs (see perlxs manual) cc -c -I. -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"0.10\" -DXS_VERSION=\"0.10\" -fpic "-I/home/cpan/perl5.08.08/lib/5.8.8/i686-linux-thread-multi-64int-ld/CORE" LBFGS.c LBFGS.xs: In function 'lbfgs_evaluate': LBFGS.xs:68: warning: ISO C90 forbids mixed declarations and code LBFGS.xs:78: warning: ISO C90 forbids mixed declarations and code LBFGS.xs: In function 'lbfgs_progress': LBFGS.xs:107: warning: ISO C90 forbids mixed declarations and code LBFGS.xs:110: warning: ISO C90 forbids mixed declarations and code LBFGS.xs:124: warning: ISO C90 forbids mixed declarations and code LBFGS.xs: In function 'XS_Algorithm__LBFGS_do_lbfgs': LBFGS.xs:239: warning: ISO C90 forbids mixed declarations and code cc -c -I. -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"0.10\" -DXS_VERSION=\"0.10\" -fpic "-I/home/cpan/perl5.08.08/lib/5.8.8/i686-linux-thread-multi-64int-ld/CORE" lbfgs.c Running Mkbootstrap for Algorithm::LBFGS () chmod 644 LBFGS.bs rm -f blib/arch/auto/Algorithm/LBFGS/LBFGS.so cc -shared -L/usr/local/lib LBFGS.o lbfgs.o -o blib/arch/auto/Algorithm/LBFGS/LBFGS.so \ -lm \ chmod 755 blib/arch/auto/Algorithm/LBFGS/LBFGS.so cp LBFGS.bs blib/arch/auto/Algorithm/LBFGS/LBFGS.bs chmod 644 blib/arch/auto/Algorithm/LBFGS/LBFGS.bs Manifying blib/man3/Algorithm::LBFGS.3 [ERROR] [Fri Jan 25 18:05:50 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/perl5.08.08/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/01-parameter.........Can't locate Test/Base.pm in @INC (@INC contains: /home/cpan/.cpanplus/5.8.8/build/Algorithm-LBFGS-0.10/blib/lib /home/cpan/.cpanplus/5.8.8/build/Algorithm-LBFGS-0.10/blib/arch /home/cpan/.cpanplus/5.8.8/build/Algorithm-LBFGS-0.10/blib /home/cpan/perl5.08.08/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl5.08.08/lib/5.8.8 /home/cpan/perl5.08.08/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl5.08.08/lib/site_perl/5.8.8 /home/cpan/perl5.08.08/lib/site_perl .) at t/LBFGS.pm line 6. BEGIN failed--compilation aborted at t/LBFGS.pm line 6. Compilation failed in require at t/01-parameter.t line 4. BEGIN failed--compilation aborted at t/01-parameter.t line 4. Dubious, test returned 2 (wstat 512, 0x200) No subtests run t/02-optimization......Can't locate Test/Base.pm in @INC (@INC contains: /home/cpan/.cpanplus/5.8.8/build/Algorithm-LBFGS-0.10/blib/lib /home/cpan/.cpanplus/5.8.8/build/Algorithm-LBFGS-0.10/blib/arch /home/cpan/.cpanplus/5.8.8/build/Algorithm-LBFGS-0.10/blib /home/cpan/perl5.08.08/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl5.08.08/lib/5.8.8 /home/cpan/perl5.08.08/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl5.08.08/lib/site_perl/5.8.8 /home/cpan/perl5.08.08/lib/site_perl .) at t/LBFGS.pm line 6. BEGIN failed--compilation aborted at t/LBFGS.pm line 6. Compilation failed in require at t/02-optimization.t line 4. BEGIN failed--compilation aborted at t/02-optimization.t line 4. Dubious, test returned 2 (wstat 512, 0x200) No subtests run t/03-monitor...........Can't locate Test/Base.pm in @INC (@INC contains: /home/cpan/.cpanplus/5.8.8/build/Algorithm-LBFGS-0.10/blib/lib /home/cpan/.cpanplus/5.8.8/build/Algorithm-LBFGS-0.10/blib/arch /home/cpan/.cpanplus/5.8.8/build/Algorithm-LBFGS-0.10/blib /home/cpan/perl5.08.08/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl5.08.08/lib/5.8.8 /home/cpan/perl5.08.08/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl5.08.08/lib/site_perl/5.8.8 /home/cpan/perl5.08.08/lib/site_perl .) at t/LBFGS.pm line 6. BEGIN failed--compilation aborted at t/LBFGS.pm line 6. Compilation failed in require at t/03-monitor.t line 4. BEGIN failed--compilation aborted at t/03-monitor.t line 4. Dubious, test returned 2 (wstat 512, 0x200) No subtests run Test Summary Report ------------------- t/01-parameter.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/02-optimization.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/03-monitor.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output Files=3, Tests=0, 0 wallclock secs ( 0.00 usr 0.02 sys + 0.02 cusr 0.03 csys = 0.07 CPU) Result: FAIL Failed 3/3 test programs. 0/0 subtests failed. make: *** [test_dynamic] Error 2 [MSG] [Fri Jan 25 18:05:50 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Test::Base As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'LAYE ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Test::Base' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 LANG = en_US LC_COLLATE = C PATH = /usr/local/bin:/usr/bin:/bin:/usr/games:/usr/lib/java/bin:/usr/lib/java/jre/bin:. PERL5LIB = :/home/cpan/.cpanplus/5.8.8/build/Algorithm-LBFGS-0.10/blib/lib:/home/cpan/.cpanplus/5.8.8/build/Algorithm-LBFGS-0.10/blib/arch:/home/cpan/.cpanplus/5.8.8/build/Algorithm-LBFGS-0.10/blib PERL5_CPANPLUS_IS_RUNNING = 467 PERL5_CPANPLUS_IS_VERSION = 0.83_08 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen.linux Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cpan/perl5.08.08/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 100 100 83 19 18 17 11 EGID: $) = 100 100 83 19 18 17 11 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.21.5-smp, archname=i686-linux-thread-multi-64int-ld uname='linux penguin 2.6.21.5-smp #2 smp tue jun 19 14:58:11 cdt 2007 i686 amd athlon(tm) 64 processor 3000+ authenticamd gnulinux ' config_args='-de -Dprefix=/home/cpan/perl5.08.08 -Dusethreads -Duse64bitint -Duselongdouble -Dusemymalloc' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=define usemymalloc=y, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='4.1.2', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.5.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.5' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
