This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear KOKOGIKO, This is a computer-generated error report created automatically by CPANPLUS, version 0.82. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sat Jan 26 21:24:31 2008] Trying to get 'http://www.cpan.org/authors/id/K/KO/KOKOGIKO/CHECKSUMS' [MSG] [Sat Jan 26 21:24:32 2008] Checksum matches for 'Geo-LocaPoint-0.0.1.tar.gz' [MSG] [Sat Jan 26 21:24:33 2008] Extracted 'Geo-LocaPoint-0.0.1/' [MSG] [Sat Jan 26 21:24:33 2008] Extracted 'Geo-LocaPoint-0.0.1/README' [MSG] [Sat Jan 26 21:24:33 2008] Extracted 'Geo-LocaPoint-0.0.1/Build.PL' [MSG] [Sat Jan 26 21:24:33 2008] Extracted 'Geo-LocaPoint-0.0.1/Makefile.PL' [MSG] [Sat Jan 26 21:24:33 2008] Extracted 'Geo-LocaPoint-0.0.1/t/' [MSG] [Sat Jan 26 21:24:33 2008] Extracted 'Geo-LocaPoint-0.0.1/t/02.lcp2ll.t' [MSG] [Sat Jan 26 21:24:33 2008] Extracted 'Geo-LocaPoint-0.0.1/t/pod.t' [MSG] [Sat Jan 26 21:24:33 2008] Extracted 'Geo-LocaPoint-0.0.1/t/perlcritic.t' [MSG] [Sat Jan 26 21:24:33 2008] Extracted 'Geo-LocaPoint-0.0.1/t/01.ll2lcp.t' [MSG] [Sat Jan 26 21:24:33 2008] Extracted 'Geo-LocaPoint-0.0.1/t/00.load.t' [MSG] [Sat Jan 26 21:24:33 2008] Extracted 'Geo-LocaPoint-0.0.1/Changes' [MSG] [Sat Jan 26 21:24:33 2008] Extracted 'Geo-LocaPoint-0.0.1/lib/' [MSG] [Sat Jan 26 21:24:33 2008] Extracted 'Geo-LocaPoint-0.0.1/lib/Geo/' [MSG] [Sat Jan 26 21:24:33 2008] Extracted 'Geo-LocaPoint-0.0.1/lib/Geo/LocaPoint.pm' [MSG] [Sat Jan 26 21:24:33 2008] Extracted 'Geo-LocaPoint-0.0.1/META.yml' [MSG] [Sat Jan 26 21:24:33 2008] Extracted 'Geo-LocaPoint-0.0.1/MANIFEST' [MSG] [Sat Jan 26 21:24:33 2008] Extracted 'Geo::LocaPoint' to '/Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1' [MSG] [Sat Jan 26 21:24:36 2008] # running Build.PL /Volumes/Media/smoke/perl588/bin/perl Build.PL - ERROR: Math::Round is not installed ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions of the modules indicated above before proceeding with this installation Checking whether your kit is complete... Looks good Checking prerequisites... Creating new 'Build' script for 'Geo-LocaPoint' version '0.0.1' [MSG] [Sat Jan 26 21:24:36 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sat Jan 26 21:24:36 2008] Module 'Geo::LocaPoint' requires 'Math::Round' version '0' to be installed [MSG] [Sat Jan 26 21:24:37 2008] Trying to get 'http://www.cpan.org/authors/id/G/GR/GROMMEL/CHECKSUMS' [MSG] [Sat Jan 26 21:24:37 2008] Checksum matches for 'Math-Round-0.06.tar.gz' [MSG] [Sat Jan 26 21:24:38 2008] Extracted 'Math-Round-0.06/' [MSG] [Sat Jan 26 21:24:38 2008] Extracted 'Math-Round-0.06/Changes' [MSG] [Sat Jan 26 21:24:38 2008] Extracted 'Math-Round-0.06/Makefile.PL' [MSG] [Sat Jan 26 21:24:38 2008] Extracted 'Math-Round-0.06/MANIFEST' [MSG] [Sat Jan 26 21:24:38 2008] Extracted 'Math-Round-0.06/META.yml' [MSG] [Sat Jan 26 21:24:38 2008] Extracted 'Math-Round-0.06/README' [MSG] [Sat Jan 26 21:24:38 2008] Extracted 'Math-Round-0.06/Round.pm' [MSG] [Sat Jan 26 21:24:38 2008] Extracted 'Math-Round-0.06/test.pl' [MSG] [Sat Jan 26 21:24:38 2008] Extracted 'Math::Round' to '/Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Math-Round-0.06' [MSG] [Sat Jan 26 21:24:39 2008] Writing Makefile for Math::Round [MSG] [Sat Jan 26 21:24:39 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sat Jan 26 21:24:41 2008] Manifying blib/man3/Math::Round.3 [MSG] [Sat Jan 26 21:24:41 2008] MAKE TEST passed: PERL_DL_NONLAZY=1 /Volumes/Media/smoke/perl588/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl 1..11 ok 1 round............ok 2 round_even.......ok 3 round_odd........ok 4 round_rand.......ok 5 nearest..........ok 6 nearest_ceil.....ok 7 nearest_floor....ok 8 nearest_rand.....ok 9 nlowmult.........ok 10 nhimult..........ok 11 All tests successful. [MSG] [Sat Jan 26 21:24:41 2008] Ok, not sending test report [MSG] [Sat Jan 26 21:24:44 2008] /Volumes/Media/smoke/perl588/bin/perl Build --makefile_env_macros 1 Copying lib/Geo/LocaPoint.pm -> blib/lib/Geo/LocaPoint.pm Manifying blib/lib/Geo/LocaPoint.pm -> blib/libdoc/Geo::LocaPoint.3 [ERROR] [Sat Jan 26 21:24:47 2008] MAKE TEST failed: /Volumes/Media/smoke/perl588/bin/perl Build --makefile_env_macros 1 test t/00.load.......# Testing Geo::LocaPoint 0.0.1 ok t/01.ll2lcp.....Can't locate Test/Base.pm in @INC (@INC contains: /Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib/lib /Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib/arch lib /Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/lib /Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/arch /Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib /Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib /Volumes/Media/smoke/perl588/lib/5.8.8/darwin-thread-multi-2level /Volumes/Media/smoke/perl588/lib/5.8.8/darwin-thread-multi-2level /Volumes/Media/smoke/perl588/lib/5.8.8 /Volumes/Media/smoke/perl588/lib/site_perl/5.8.8/darwin-thread-multi-2level /Volumes/Media/smoke/perl588/lib/site_perl/5.8.8/darwin-thread-multi-2level /Volumes/Media/smoke/perl588/lib/site_perl/5.8.8 /Volumes/Media/smoke/perl588/lib/site_perl/5.8.8/darwin-thread-multi-2level /Volumes/Media/smoke/perl588/lib/site_perl/5.8.8 /Volumes/Media/smoke/perl588/lib/site_perl . /Volumes/Media/smoke/perl588/lib/5.8.8/darwin-thread-multi-2level /Volumes/Media/smoke/perl588/lib/5.8.8 /Volumes/Media/smoke/perl588/lib/site_perl/5.8.8/darwin-thread-multi-2level /Volumes/Media/smoke/perl588/lib/site_perl/5.8.8 /Volumes/Media/smoke/perl588/lib/site_perl .) at t/01.ll2lcp.t line 2. BEGIN failed--compilation aborted at t/01.ll2lcp.t line 2. dubious Test returned status 2 (wstat 512, 0x200) t/02.lcp2ll.....Can't locate Test/Base.pm in @INC (@INC contains: /Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib/lib /Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib/arch lib /Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/lib /Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/arch /Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib /Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib /Volumes/Media/smoke/perl588/lib/5.8.8/darwin-thread-multi-2level /Volumes/Media/smoke/perl588/lib/5.8.8/darwin-thread-multi-2level /Volumes/Media/smoke/perl588/lib/5.8.8 /Volumes/Media/smoke/perl588/lib/site_perl/5.8.8/darwin-thread-multi-2level /Volumes/Media/smoke/perl588/lib/site_perl/5.8.8/darwin-thread-multi-2level /Volumes/Media/smoke/perl588/lib/site_perl/5.8.8 /Volumes/Media/smoke/perl588/lib/site_perl/5.8.8/darwin-thread-multi-2level /Volumes/Media/smoke/perl588/lib/site_perl/5.8.8 /Volumes/Media/smoke/perl588/lib/site_perl . /Volumes/Media/smoke/perl588/lib/5.8.8/darwin-thread-multi-2level /Volumes/Media/smoke/perl588/lib/5.8.8 /Volumes/Media/smoke/perl588/lib/site_perl/5.8.8/darwin-thread-multi-2level /Volumes/Media/smoke/perl588/lib/site_perl/5.8.8 /Volumes/Media/smoke/perl588/lib/site_perl .) at t/02.lcp2ll.t line 2. BEGIN failed--compilation aborted at t/02.lcp2ll.t line 2. dubious Test returned status 2 (wstat 512, 0x200) t/perlcritic....Can't locate Test/Perl/Critic.pm in @INC (@INC contains: /Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib/lib /Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib/arch lib /Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/lib /Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/arch /Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib /Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib /Volumes/Media/smoke/perl588/lib/5.8.8/darwin-thread-multi-2level /Volumes/Media/smoke/perl588/lib/5.8.8/darwin-thread-multi-2level /Volumes/Media/smoke/perl588/lib/5.8.8 /Volumes/Media/smoke/perl588/lib/site_perl/5.8.8/darwin-thread-multi-2level /Volumes/Media/smoke/perl588/lib/site_perl/5.8.8/darwin-thread-multi-2level /Volumes/Media/smoke/perl588/lib/site_perl/5.8.8 /Volumes/Media/smoke/perl588/lib/site_perl/5.8.8/darwin-thread-multi-2level /Volumes/Media/smoke/perl588/lib/site_perl/5.8.8 /Volumes/Media/smoke/perl588/lib/site_perl . /Volumes/Media/smoke/perl588/lib/5.8.8/darwin-thread-multi-2level /Volumes/Media/smoke/perl588/lib/5.8.8 /Volumes/Media/smoke/perl588/lib/site_perl/5.8.8/darwin-thread-multi-2level /Volumes/Media/smoke/perl588/lib/site_perl/5.8.8 /Volumes/Media/smoke/perl588/lib/site_perl .) at t/perlcritic.t line 3. dubious Test returned status 2 (wstat 512, 0x200) t/pod...........skipped all skipped: Test::Pod 1.14 required for testing POD Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/01.ll2lcp.t 2 512 ?? ?? ?? t/02.lcp2ll.t 2 512 ?? ?? ?? t/perlcritic.t 2 512 ?? ?? ?? 1 test skipped. Failed 3/5 test scripts. 0/1 subtests failed. Files=5, Tests=1, 1 wallclock secs ( 0.40 cusr + 0.17 csys = 0.57 CPU) Failed 3/5 test programs. 0/1 subtests failed. [MSG] [Sat Jan 26 21:24:47 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Test::Base Test::Perl::Critic As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'KOKOGIKO ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Test::Base' => '0', # or a minimum working version 'Test::Perl::Critic' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Math::Round 0.06 0 Test::More 0.72 0 version 0.7203 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin PERL5LIB = :/Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/lib:/Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/arch:/Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib:/Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/lib:/Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/arch:/Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib:/Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib/lib:/Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib/arch:/Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib PERL5_CPANPLUS_IS_RUNNING = 18277 PERL5_CPANPLUS_IS_VERSION = 0.82 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /Volumes/Media/smoke/perl588/bin/perl UID: $< = 502 EUID: $> = 502 GID: $( = 502 502 EGID: $) = 502 502 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=darwin, osvers=8.10.0, archname=darwin-thread-multi-2level uname='darwin afalglas.local 8.10.0 darwin kernel version 8.10.0: wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc power macintosh powerpc ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include', optimize='-O3', cppflags='-no-cpp-precomp -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /usr/lib libs=-ldbm -ldl -lm -lc perllibs=-ldl -lm -lc libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' ' cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup -L/usr/local/lib'
