This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Eric Rybski, This is a computer-generated report for forks-0.27 on 5.8.7, created automatically by CPAN-Reporter-1.08 and sent to the CPAN Testers mailing list. If you have received this email directly, it is because the person testing your distribution chose to send a copy to your CPAN email address; there may be a delay before the official report is received and processed by CPAN Testers. Thank you for uploading your work to CPAN. Congratulations! All tests were successful. Sections of this report: * Tester comments * Program output * Prerequisites * Environment and other context ------------------------------ TESTER COMMENTS ------------------------------ Additional comments from tester: [none provided] ------------------------------ PROGRAM OUTPUT ------------------------------ Output from '/usr/bin/make test': PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/[EMAIL PROTECTED]/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/forks00-sigtrap......ok t/forks01..............# # Please note that there are some problems with Test::More and the forks.pm # module, due to a limitation in Test::More when using threads API with forks. # Some texts with 'WHOA!' may appear on the screen, and the final result of # the test may be inconclusive. If all separate tests have been successful, # then it should be completely safe to install the forks.pm modules. # WHOA! Somehow you got a different number of results than tests ran! This should never happen! Please contact the author immediately! at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/[EMAIL PROTECTED]/lib/5.8.7/Test/Builder.pm line 1689. END failed--call queue aborted. WHOA! Somehow you got a different number of results than tests ran! This should never happen! Please contact the author immediately! at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/[EMAIL PROTECTED]/lib/5.8.7/Test/Builder.pm line 1689. END failed--call queue aborted. WHOA! Somehow you got a different number of results than tests ran! This should never happen! Please contact the author immediately! at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/[EMAIL PROTECTED]/lib/5.8.7/Test/Builder.pm line 1689. END failed--call queue aborted. WHOA! Somehow you got a different number of results than tests ran! This should never happen! Please contact the author immediately! at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/[EMAIL PROTECTED]/lib/5.8.7/Test/Builder.pm line 1689. END failed--call queue aborted. WHOA! Somehow you got a different number of results than tests ran! This should never happen! Please contact the author immediately! at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/[EMAIL PROTECTED]/lib/5.8.7/Test/Builder.pm line 1689. END failed--call queue aborted. WHOA! Somehow you got a different number of results than tests ran! This should never happen! Please contact the author immediately! at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/[EMAIL PROTECTED]/lib/5.8.7/Test/Builder.pm line 1689. END failed--call queue aborted. WHOA! Somehow you got a different number of results than tests ran! This should never happen! Please contact the author immediately! at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/[EMAIL PROTECTED]/lib/5.8.7/Test/Builder.pm line 1689. END failed--call queue aborted. WHOA! Somehow you got a different number of results than tests ran! This should never happen! Please contact the author immediately! at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/[EMAIL PROTECTED]/lib/5.8.7/Test/Builder.pm line 1689. END failed--call queue aborted. WHOA! Somehow you got a different number of results than tests ran! This should never happen! Please contact the author immediately! at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/[EMAIL PROTECTED]/lib/5.8.7/Test/Builder.pm line 1689. END failed--call queue aborted. WHOA! Somehow you got a different number of results than tests ran! This should never happen! Please contact the author immediately! at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/[EMAIL PROTECTED]/lib/5.8.7/Test/Builder.pm line 1689. END failed--call queue aborted. WHOA! Somehow you got a different number of results than tests ran! This should never happen! Please contact the author immediately! at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/[EMAIL PROTECTED]/lib/5.8.7/Test/Builder.pm line 1689. END failed--call queue aborted. WHOA! Somehow you got a different number of results than tests ran! This should never happen! Please contact the author immediately! at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/[EMAIL PROTECTED]/lib/5.8.7/Test/Builder.pm line 1689. END failed--call queue aborted. WHOA! Somehow you got a different number of results than tests ran! This should never happen! Please contact the author immediately! at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/[EMAIL PROTECTED]/lib/5.8.7/Test/Builder.pm line 1689. END failed--call queue aborted. WHOA! Somehow you got a different number of results than tests ran! This should never happen! Please contact the author immediately! at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/[EMAIL PROTECTED]/lib/5.8.7/Test/Builder.pm line 1689. END failed--call queue aborted. WHOA! Somehow you got a different number of results than tests ran! This should never happen! Please contact the author immediately! at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/[EMAIL PROTECTED]/lib/5.8.7/Test/Builder.pm line 1689. END failed--call queue aborted. ok t/forks02..............# # The following tests are a stress test for shared arrays and shared hashes # that may take a few minutes on slower machines. # ok t/forks03..............# # The following tests check that blessing shared variables is fully transparent. # ok t/forks04..............ok t/forks05..............Perl exited with active threads: 0 running and unjoined 1 finished and unjoined 0 running and detached ok t/forks06..............# # These tests exercise deadlock detection and resolution features of forks. # WHOA! Somehow you got a different number of results than tests ran! This should never happen! Please contact the author immediately! at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/[EMAIL PROTECTED]/lib/5.8.7/Test/Builder.pm line 1689. END failed--call queue aborted. ok t/forks07..............# # These tests check inter-thread signaling. # Signal SIGTERM received, but no signal handler set for thread 1 Perl exited with active threads: 0 running and unjoined 2 finished and unjoined 0 running and detached ok t/forks20..............ok t/forks99..............skipped: Set the environment variable TEST_SIGNATURE to enable this test. All tests successful. Files=10, Tests=323, 121 wallclock secs ( 0.07 usr 0.02 sys + 3.80 cusr 1.10 csys = 4.99 CPU) Result: PASS ------------------------------ PREREQUISITES ------------------------------ Prerequisite modules loaded: requires: Module Need Have ------------------- ---- ------- Attribute::Handlers 0 0.78_01 Devel::Required 0.07 0.08 File::Spec 0 3.27 IO::Socket 1.18 1.30 List::MoreUtils 0.15 0.21 Scalar::Util 1.09 1.19 Storable 0 2.18 Time::HiRes 0 1.9711 ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: LANG = de_DE.UTF-8 PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin PERL5LIB = PERL5_CPANPLUS_IS_RUNNING = 3987 PERL5_CPAN_IS_RUNNING = 3987 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/bin/zsh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): $^X = /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/[EMAIL PROTECTED]/bin/perl $UID/$EUID = 1005 / 1005 $GID = 1005 1005 $EGID = 1005 1005 Perl module toolchain versions installed: Module Have ------------------- ------- CPAN 1.92_55 Cwd 3.27 ExtUtils::CBuilder 0.21 ExtUtils::Command 1.13 ExtUtils::Install 1.44 ExtUtils::MakeMaker 6.43_01 ExtUtils::Manifest 1.51 ExtUtils::ParseXS 2.18 File::Spec 3.27 Module::Build 0.2808 Module::Signature 0.55 Test::Harness 3.07 Test::More 0.74 YAML 0.66 YAML::Syck 0.99 version 0.74 -- Summary of my perl5 (revision 5 version 8 subversion 7) configuration: Platform: osname=linux, osvers=2.6.14, archname=i686-linux-thread-multi-64int uname='linux k75 2.6.14 #1 fri jan 27 16:22:47 cet 2006 i686 gnulinux ' config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/[EMAIL PROTECTED] -Dinstallusrbinperl=n -Uversiononly -des -Duse64bitint -Dusedevel -Dusethreads' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='4.0.3 20060115 (prerelease) (Debian 4.0.2-7)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.5.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.3.5' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
