This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Aran Clary Deltac, This is a computer-generated error report created automatically by CPANPLUS, version 0.84. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sun Jan 27 22:42:53 2008] Trying to get 'http://www.cpan.org/authors/id/K/KO/KOKOGIKO/Geo-Proj-Japan-0.0.1.tar.gz' [MSG] [Sun Jan 27 22:42:59 2008] Trying to get 'http://www.cpan.org/authors/id/K/KO/KOKOGIKO/CHECKSUMS' [MSG] [Sun Jan 27 22:43:00 2008] Checksum matches for 'Geo-Proj-Japan-0.0.1.tar.gz' [MSG] [Sun Jan 27 22:43:01 2008] Extracted 'Geo-Proj-Japan-0.0.1/' [MSG] [Sun Jan 27 22:43:01 2008] Extracted 'Geo-Proj-Japan-0.0.1/README' [MSG] [Sun Jan 27 22:43:01 2008] Extracted 'Geo-Proj-Japan-0.0.1/Build.PL' [MSG] [Sun Jan 27 22:43:01 2008] Extracted 'Geo-Proj-Japan-0.0.1/Makefile.PL' [MSG] [Sun Jan 27 22:43:01 2008] Extracted 'Geo-Proj-Japan-0.0.1/t/' [MSG] [Sun Jan 27 22:43:01 2008] Extracted 'Geo-Proj-Japan-0.0.1/t/01.transform.t' [MSG] [Sun Jan 27 22:43:01 2008] Extracted 'Geo-Proj-Japan-0.0.1/t/00.load.t' [MSG] [Sun Jan 27 22:43:01 2008] Extracted 'Geo-Proj-Japan-0.0.1/Changes' [MSG] [Sun Jan 27 22:43:01 2008] Extracted 'Geo-Proj-Japan-0.0.1/lib/' [MSG] [Sun Jan 27 22:43:01 2008] Extracted 'Geo-Proj-Japan-0.0.1/lib/Geo/' [MSG] [Sun Jan 27 22:43:01 2008] Extracted 'Geo-Proj-Japan-0.0.1/lib/Geo/Proj/' [MSG] [Sun Jan 27 22:43:01 2008] Extracted 'Geo-Proj-Japan-0.0.1/lib/Geo/Proj/Japan.pm' [MSG] [Sun Jan 27 22:43:01 2008] Extracted 'Geo-Proj-Japan-0.0.1/META.yml' [MSG] [Sun Jan 27 22:43:01 2008] Extracted 'Geo-Proj-Japan-0.0.1/MANIFEST' [MSG] [Sun Jan 27 22:43:01 2008] Extracted 'Geo::Proj::Japan' to '/Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/Geo-Proj-Japan-0.0.1' [MSG] [Sun Jan 27 22:43:04 2008] # running Build.PL /Volumes/Media/smoke/perl5.10.0/bin/perl Build.PL - ERROR: Geo::Proj is not installed ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions of the modules indicated above before proceeding with this installation Checking whether your kit is complete... Looks good Checking prerequisites... Creating new 'Build' script for 'Geo-Proj-Japan' version '0.0.1' [MSG] [Sun Jan 27 22:43:04 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sun Jan 27 22:43:04 2008] Module 'Geo::Proj::Japan' requires 'Geo::Proj' version '0.06' to be installed [MSG] [Sun Jan 27 22:43:04 2008] Trying to get 'http://www.cpan.org/authors/id/M/MA/MARKOV/Geo-Point-0.06.tar.gz' [MSG] [Sun Jan 27 22:43:10 2008] Trying to get 'http://www.cpan.org/authors/id/M/MA/MARKOV/CHECKSUMS' [MSG] [Sun Jan 27 22:43:12 2008] Checksum matches for 'Geo-Point-0.06.tar.gz' [MSG] [Sun Jan 27 22:43:12 2008] Extracted 'Geo-Point-0.06/' [MSG] [Sun Jan 27 22:43:12 2008] Extracted 'Geo-Point-0.06/t/' [MSG] [Sun Jan 27 22:43:12 2008] Extracted 'Geo-Point-0.06/t/22rstr.t' [MSG] [Sun Jan 27 22:43:12 2008] Extracted 'Geo-Point-0.06/t/pod.t' [MSG] [Sun Jan 27 22:43:12 2008] Extracted 'Geo-Point-0.06/t/11point.t' [MSG] [Sun Jan 27 22:43:12 2008] Extracted 'Geo-Point-0.06/t/20pstr.t' [MSG] [Sun Jan 27 22:43:12 2008] Extracted 'Geo-Point-0.06/t/21lstr.t' [MSG] [Sun Jan 27 22:43:12 2008] Extracted 'Geo-Point-0.06/t/09proj.t' [MSG] [Sun Jan 27 22:43:12 2008] Extracted 'Geo-Point-0.06/t/10dms.t' [MSG] [Sun Jan 27 22:43:12 2008] Extracted 'Geo-Point-0.06/lib/' [MSG] [Sun Jan 27 22:43:12 2008] Extracted 'Geo-Point-0.06/lib/Geo/' [MSG] [Sun Jan 27 22:43:13 2008] Extracted 'Geo-Point-0.06/lib/Geo/Shape.pod' [MSG] [Sun Jan 27 22:43:13 2008] Extracted 'Geo-Point-0.06/lib/Geo/Surface.pm' [MSG] [Sun Jan 27 22:43:13 2008] Extracted 'Geo-Point-0.06/lib/Geo/Proj.pm' [MSG] [Sun Jan 27 22:43:13 2008] Extracted 'Geo-Point-0.06/lib/Geo/Proj.pod' [MSG] [Sun Jan 27 22:43:13 2008] Extracted 'Geo-Point-0.06/lib/Geo/Line.pm' [MSG] [Sun Jan 27 22:43:13 2008] Extracted 'Geo-Point-0.06/lib/Geo/Shape.pm' [MSG] [Sun Jan 27 22:43:13 2008] Extracted 'Geo-Point-0.06/lib/Geo/Line.pod' [MSG] [Sun Jan 27 22:43:13 2008] Extracted 'Geo-Point-0.06/lib/Geo/Surface.pod' [MSG] [Sun Jan 27 22:43:13 2008] Extracted 'Geo-Point-0.06/lib/Geo/Point.pod' [MSG] [Sun Jan 27 22:43:13 2008] Extracted 'Geo-Point-0.06/lib/Geo/Space.pod' [MSG] [Sun Jan 27 22:43:13 2008] Extracted 'Geo-Point-0.06/lib/Geo/Space.pm' [MSG] [Sun Jan 27 22:43:13 2008] Extracted 'Geo-Point-0.06/lib/Geo/Point.pm' [MSG] [Sun Jan 27 22:43:13 2008] Extracted 'Geo-Point-0.06/README' [MSG] [Sun Jan 27 22:43:13 2008] Extracted 'Geo-Point-0.06/Makefile.PL' [MSG] [Sun Jan 27 22:43:13 2008] Extracted 'Geo-Point-0.06/META.yml' [MSG] [Sun Jan 27 22:43:13 2008] Extracted 'Geo-Point-0.06/ChangeLog' [MSG] [Sun Jan 27 22:43:13 2008] Extracted 'Geo-Point-0.06/MANIFEST' [MSG] [Sun Jan 27 22:43:13 2008] Extracted 'Geo::Proj' to '/Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/Geo-Point-0.06' [MSG] [Sun Jan 27 22:43:15 2008] Checking if your kit is complete... Looks good Warning: prerequisite Geo::Distance 0.06 not found. Warning: prerequisite Geo::Proj4 0.96 not found. Warning: prerequisite Math::Polygon 0.003 not found. Writing Makefile for Geo::Point [MSG] [Sun Jan 27 22:43:15 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sun Jan 27 22:43:15 2008] Module 'Geo::Proj' requires 'Geo::Distance' version '0.06' to be installed [MSG] [Sun Jan 27 22:43:15 2008] Module 'Geo::Proj' requires 'Geo::Proj4' version '0.96' to be installed [MSG] [Sun Jan 27 22:43:15 2008] Module 'Geo::Proj' requires 'Math::Polygon' version '0.003' to be installed [MSG] [Sun Jan 27 22:43:15 2008] Trying to get 'http://www.cpan.org/authors/id/B/BL/BLUEFEET/Geo-Distance-0.11.tar.gz' [MSG] [Sun Jan 27 22:43:16 2008] Trying to get 'http://www.cpan.org/authors/id/B/BL/BLUEFEET/CHECKSUMS' [MSG] [Sun Jan 27 22:43:17 2008] Checksum matches for 'Geo-Distance-0.11.tar.gz' [MSG] [Sun Jan 27 22:43:17 2008] Extracted 'Geo-Distance-0.11/' [MSG] [Sun Jan 27 22:43:18 2008] Extracted 'Geo-Distance-0.11/README' [MSG] [Sun Jan 27 22:43:18 2008] Extracted 'Geo-Distance-0.11/Changes' [MSG] [Sun Jan 27 22:43:18 2008] Extracted 'Geo-Distance-0.11/test.pl' [MSG] [Sun Jan 27 22:43:18 2008] Extracted 'Geo-Distance-0.11/Makefile.PL' [MSG] [Sun Jan 27 22:43:18 2008] Extracted 'Geo-Distance-0.11/Distance.pm' [MSG] [Sun Jan 27 22:43:18 2008] Extracted 'Geo-Distance-0.11/MANIFEST' [MSG] [Sun Jan 27 22:43:18 2008] Extracted 'Geo::Distance' to '/Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/Geo-Distance-0.11' [MSG] [Sun Jan 27 22:43:19 2008] Checking if your kit is complete... Looks good Writing Makefile for Geo::Distance [MSG] [Sun Jan 27 22:43:19 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sun Jan 27 22:43:24 2008] cp Distance.pm blib/lib/Geo/Distance.pm Manifying blib/man3/Geo::Distance.3 [ERROR] [Sun Jan 27 22:43:25 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /Volumes/Media/smoke/perl5.10.0/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl Can't locate DBI.pm in @INC (@INC contains: blib/lib blib/arch /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib/lib /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib/arch /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib /Volumes/Media/smoke/perl5.10.0/lib/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl5.10.0/lib/5.10.0 /Volumes/Media/smoke/perl5.10.0/lib/site_perl/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl5.10.0/lib/site_perl/5.10.0 .) at test.pl line 3. BEGIN failed--compilation aborted at test.pl line 3. # Looks like your test died before it could output anything. make: *** [test_dynamic] Error 255 [MSG] [Sun Jan 27 22:43:25 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: DBI As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'Aran Clary Deltac ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'DBI' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin PERL5LIB = :/Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib/lib:/Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib/arch:/Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib PERL5_CPANPLUS_IS_RUNNING = 5521 PERL5_CPANPLUS_IS_VERSION = 0.84 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /Volumes/Media/smoke/perl5.10.0/bin/perl UID: $< = 502 EUID: $> = 502 GID: $( = 502 502 EGID: $) = 502 502 ------------------------------- -- Summary of my perl5 (revision 5 version 10 subversion 0) configuration: Platform: osname=darwin, osvers=8.10.0, archname=darwin-thread-multi-64int-2level uname='darwin afalglas.bingosnet.co.uk 8.10.0 darwin kernel version 8.10.0: wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc power macintosh powerpc ' config_args='-e -Dprefix=/Volumes/Media/smoke/perl5.10.0 -Dusethreads -Duse64bitint -Dusemymalloc=n' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe -I/usr/local/include', optimize='-O3', cppflags='-no-cpp-precomp -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /usr/lib libs=-ldbm -ldl -lm -lc perllibs=-ldl -lm -lc libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' ' cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup -L/usr/local/lib'
