This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear BILBO, This is a computer-generated error report created automatically by CPANPLUS, version 0.84. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Mon Jan 28 17:38:50 2008] Extracted 'Proc-SafeExec-1.2' [MSG] [Mon Jan 28 17:38:50 2008] Extracted 'Proc-SafeExec-1.2/MANIFEST' [MSG] [Mon Jan 28 17:38:50 2008] Extracted 'Proc-SafeExec-1.2/lib' [MSG] [Mon Jan 28 17:38:50 2008] Extracted 'Proc-SafeExec-1.2/t' [MSG] [Mon Jan 28 17:38:50 2008] Extracted 'Proc-SafeExec-1.2/Makefile.PL' [MSG] [Mon Jan 28 17:38:50 2008] Extracted 'Proc-SafeExec-1.2/META.yml' [MSG] [Mon Jan 28 17:38:50 2008] Extracted 'Proc-SafeExec-1.2/t/Proc-SafeExec.t' [MSG] [Mon Jan 28 17:38:50 2008] Extracted 'Proc-SafeExec-1.2/lib/Proc' [MSG] [Mon Jan 28 17:38:50 2008] Extracted 'Proc-SafeExec-1.2/lib/Proc/SafeExec.pm' [MSG] [Mon Jan 28 17:38:50 2008] Extracted 'Proc::SafeExec' to '/net/sunu991/disc1/home/.cpanplus/5.10.0/build/Proc-SafeExec-1.2' [MSG] [Mon Jan 28 17:38:54 2008] Checking if your kit is complete... Looks good Writing Makefile for Proc::SafeExec [MSG] [Mon Jan 28 17:38:54 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Jan 28 17:39:10 2008] cp lib/Proc/SafeExec.pm blib/lib/Proc/SafeExec.pm Manifying blib/man3/Proc::SafeExec.3 [ERROR] [Mon Jan 28 17:39:17 2008] MAKE TEST failed: PERL_DL_NONLAZY=1 /usr/local/perl-5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/Proc-SafeExec......Use of uninitialized value $message in concatenation (.) or string at /net/sunu991/disc1/.cpanplus/5.10.0/build/Proc-SafeExec-1.2/blib/lib/Proc/SafeExec.pm line 493. # Failed test 2 in t/Proc-SafeExec.t at line 18 # t/Proc-SafeExec.t line 18 is: ok(not Proc::SafeExec::test() =~ qr/(^|\n)not ok/s); Failed 1/2 subtests Test Summary Report ------------------- t/Proc-SafeExec.t (Wstat: 0 Tests: 2 Failed: 1) Failed test: 2 Files=1, Tests=2, 3 wallclock secs ( 0.09 usr 0.08 sys + 0.92 cusr 1.03 csys = 2.12 CPU) Result: FAIL Failed 1/1 test programs. 1/2 subtests failed. make: *** [test_dynamic] Error 255 [MSG] [Mon Jan 28 17:39:17 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.03. -- Summary of my perl5 (revision 5 version 10 subversion 0) configuration: Platform: osname=solaris, osvers=2.9, archname=sun4-solaris-thread-multi-64int uname='sunos irgendwas 5.9 generic_118558-35 sun4u sparc sunw,ultra-5_10 solaris ' config_args='-des -Dprefix=/usr/local/perl-5.10.0 -Dcc=gcc -Dlocincpth=/usr/local/test/include /usr/local/gnu/include -Dloclibpth=/usr/local/test/lib /usr/local/gnu/lib -Dusethreads -Duse64bitint' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -fno-strict-aliasing -pipe -I/usr/local/test/include -I/usr/local/gnu/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O', cppflags='-D_REENTRANT -fno-strict-aliasing -pipe -I/usr/local/test/include -I/usr/local/gnu/include' ccversion='', gccversion='3.4.1', gccosandvers='solaris2.9' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/test/lib -L/usr/local/gnu/lib ' libpth=/usr/local/test/lib /usr/local/gnu/lib /usr/lib /usr/ccs/lib /usr/local/lib libs=-lsocket -lnsl -lgdbm -ldb -ldl -lm -lpthread -lc perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' ' cccdlflags='-fPIC', lddlflags='-G -L/usr/local/test/lib -L/usr/local/gnu/lib'
