This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear KOKOGIKO, This is a computer-generated error report created automatically by CPANPLUS, version 0.83_08. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Tue Jan 29 16:11:26 2008] Trying to get 'http://www.cpan.org/authors/id/K/KO/KOKOGIKO/CHECKSUMS' [MSG] [Tue Jan 29 16:11:28 2008] Checksum matches for 'Geo-LocaPoint-0.0.1.tar.gz' [MSG] [Tue Jan 29 16:11:29 2008] Extracted 'Geo-LocaPoint-0.0.1/' [MSG] [Tue Jan 29 16:11:29 2008] Extracted 'Geo-LocaPoint-0.0.1/README' [MSG] [Tue Jan 29 16:11:29 2008] Extracted 'Geo-LocaPoint-0.0.1/Build.PL' [MSG] [Tue Jan 29 16:11:29 2008] Extracted 'Geo-LocaPoint-0.0.1/Makefile.PL' [MSG] [Tue Jan 29 16:11:29 2008] Extracted 'Geo-LocaPoint-0.0.1/t/' [MSG] [Tue Jan 29 16:11:29 2008] Extracted 'Geo-LocaPoint-0.0.1/t/02.lcp2ll.t' [MSG] [Tue Jan 29 16:11:29 2008] Extracted 'Geo-LocaPoint-0.0.1/t/pod.t' [MSG] [Tue Jan 29 16:11:29 2008] Extracted 'Geo-LocaPoint-0.0.1/t/perlcritic.t' [MSG] [Tue Jan 29 16:11:29 2008] Extracted 'Geo-LocaPoint-0.0.1/t/01.ll2lcp.t' [MSG] [Tue Jan 29 16:11:29 2008] Extracted 'Geo-LocaPoint-0.0.1/t/00.load.t' [MSG] [Tue Jan 29 16:11:29 2008] Extracted 'Geo-LocaPoint-0.0.1/Changes' [MSG] [Tue Jan 29 16:11:29 2008] Extracted 'Geo-LocaPoint-0.0.1/lib/' [MSG] [Tue Jan 29 16:11:29 2008] Extracted 'Geo-LocaPoint-0.0.1/lib/Geo/' [MSG] [Tue Jan 29 16:11:29 2008] Extracted 'Geo-LocaPoint-0.0.1/lib/Geo/LocaPoint.pm' [MSG] [Tue Jan 29 16:11:29 2008] Extracted 'Geo-LocaPoint-0.0.1/META.yml' [MSG] [Tue Jan 29 16:11:30 2008] Extracted 'Geo-LocaPoint-0.0.1/MANIFEST' [MSG] [Tue Jan 29 16:11:30 2008] Extracted 'Geo::LocaPoint' to '/home/cpan/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1' [MSG] [Tue Jan 29 16:11:33 2008] # running Build.PL /home/cpan/perl588/bin/perl Build.PL - ERROR: Math::Round is not installed ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions of the modules indicated above before proceeding with this installation Checking whether your kit is complete... Looks good Checking prerequisites... Creating new 'Build' script for 'Geo-LocaPoint' version '0.0.1' [MSG] [Tue Jan 29 16:11:33 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Tue Jan 29 16:11:33 2008] Module 'Geo::LocaPoint' requires 'Math::Round' version '0' to be installed [MSG] [Tue Jan 29 16:11:33 2008] Trying to get 'http://www.cpan.org/authors/id/G/GR/GROMMEL/CHECKSUMS' [MSG] [Tue Jan 29 16:11:34 2008] Checksum matches for 'Math-Round-0.06.tar.gz' [MSG] [Tue Jan 29 16:11:35 2008] Extracted 'Math-Round-0.06/' [MSG] [Tue Jan 29 16:11:35 2008] Extracted 'Math-Round-0.06/Changes' [MSG] [Tue Jan 29 16:11:35 2008] Extracted 'Math-Round-0.06/Makefile.PL' [MSG] [Tue Jan 29 16:11:35 2008] Extracted 'Math-Round-0.06/MANIFEST' [MSG] [Tue Jan 29 16:11:35 2008] Extracted 'Math-Round-0.06/META.yml' [MSG] [Tue Jan 29 16:11:35 2008] Extracted 'Math-Round-0.06/README' [MSG] [Tue Jan 29 16:11:35 2008] Extracted 'Math-Round-0.06/Round.pm' [MSG] [Tue Jan 29 16:11:35 2008] Extracted 'Math-Round-0.06/test.pl' [MSG] [Tue Jan 29 16:11:35 2008] Extracted 'Math::Round' to '/home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06' [MSG] [Tue Jan 29 16:11:36 2008] Writing Makefile for Math::Round [MSG] [Tue Jan 29 16:11:36 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Tue Jan 29 16:11:37 2008] Manifying blib/man3/Math::Round.3 [MSG] [Tue Jan 29 16:11:38 2008] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl 1..11 ok 1 round............ok 2 round_even.......ok 3 round_odd........ok 4 round_rand.......ok 5 nearest..........ok 6 nearest_ceil.....ok 7 nearest_floor....ok 8 nearest_rand.....ok 9 nlowmult.........ok 10 nhimult..........ok 11 All tests successful. [MSG] [Tue Jan 29 16:11:38 2008] Sending test report for 'Math-Round-0.06' [MSG] [Tue Jan 29 16:11:38 2008] Ok, not sending test report [MSG] [Tue Jan 29 16:11:40 2008] /home/cpan/perl588/bin/perl Build --makefile_env_macros 1 Copying lib/Geo/LocaPoint.pm -> blib/lib/Geo/LocaPoint.pm Manifying blib/lib/Geo/LocaPoint.pm -> blib/libdoc/Geo::LocaPoint.3 [ERROR] [Tue Jan 29 16:11:44 2008] MAKE TEST failed: /home/cpan/perl588/bin/perl Build --makefile_env_macros 1 test t/00.load.........# Testing Geo::LocaPoint 0.0.1 ok t/01.ll2lcp.......Can't locate Test/Base.pm in @INC (@INC contains: /home/cpan/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib/arch lib /home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib /home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib /home/cpan/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib /home/cpan/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi-64int /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at t/01.ll2lcp.t line 2. BEGIN failed--compilation aborted at t/01.ll2lcp.t line 2. Dubious, test returned 2 (wstat 512, 0x200) No subtests run t/02.lcp2ll.......Can't locate Test/Base.pm in @INC (@INC contains: /home/cpan/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib/arch lib /home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib /home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib /home/cpan/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib /home/cpan/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi-64int /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at t/02.lcp2ll.t line 2. BEGIN failed--compilation aborted at t/02.lcp2ll.t line 2. Dubious, test returned 2 (wstat 512, 0x200) No subtests run t/perlcritic......Can't locate Test/Perl/Critic.pm in @INC (@INC contains: /home/cpan/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib/arch lib /home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib /home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib /home/cpan/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib /home/cpan/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi-64int /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at t/perlcritic.t line 3. Dubious, test returned 2 (wstat 512, 0x200) No subtests run t/pod.............skipped: Test::Pod 1.14 required for testing POD Test Summary Report ------------------- t/01.ll2lcp.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/02.lcp2ll.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/perlcritic.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output Files=5, Tests=1, 2 wallclock secs ( 0.12 usr 0.32 sys + 0.39 cusr 0.62 csys = 1.45 CPU) Result: FAIL Failed 3/5 test programs. 0/1 subtests failed. *** Error code 255 Stop in /home/cpan/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1 (line 64 of Makefile). [MSG] [Tue Jan 29 16:11:44 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Test::Base Test::Perl::Critic As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'KOKOGIKO ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Test::Base' => '0', # or a minimum working version 'Test::Perl::Critic' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Math::Round 0.06 0 Test::More 0.62 0 version 0.74 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:. PERL5LIB = :/home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/lib:/home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/arch:/home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib:/home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/lib:/home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib/arch:/home/cpan/perl588/.cpanplus/5.8.8/build/Math-Round-0.06/blib:/home/cpan/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib/lib:/home/cpan/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib/arch:/home/cpan/perl588/.cpanplus/5.8.8/build/Geo-LocaPoint-0.0.1/blib PERL5_CPANPLUS_IS_RUNNING = 9037 PERL5_CPANPLUS_IS_VERSION = 0.83_08 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/ksh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cpan/perl588/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 1000 0 1000 EGID: $) = 1000 0 1000 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=openbsd, osvers=4.2, archname=OpenBSD.i386-openbsd-thread-multi-64int uname='openbsd wynionyn.bingosnet.co.uk 4.2 generic#375 i386 ' config_args='-Dprefix=/home/cpan/perl588 -Dusethreads -Duse64bitint -Uusemymalloc' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-pthread -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include', optimize='-O2', cppflags='-pthread -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include' ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.2' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags ='-pthread -Wl,-E -L/usr/local/lib' libpth=/usr/local/lib /usr/lib libs=-lm -lutil -lc perllibs=-lm -lutil -lc libc=/usr/lib/libc.so.41.0, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' ' cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib'
