This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Aran Clary Deltac, This is a computer-generated error report created automatically by CPANPLUS, version 0.84. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Fri Feb 1 05:22:13 2008] Trying to get 'http://www.cpan.org/authors/id/K/KO/KOKOGIKO/CHECKSUMS' [MSG] [Fri Feb 1 05:22:14 2008] Checksum matches for 'Geo-Point-Plugin-Transform-0.0.1.tar.gz' [MSG] [Fri Feb 1 05:22:15 2008] Extracted 'Geo-Point-Plugin-Transform-0.0.1/' [MSG] [Fri Feb 1 05:22:15 2008] Extracted 'Geo-Point-Plugin-Transform-0.0.1/README' [MSG] [Fri Feb 1 05:22:15 2008] Extracted 'Geo-Point-Plugin-Transform-0.0.1/Build.PL' [MSG] [Fri Feb 1 05:22:15 2008] Extracted 'Geo-Point-Plugin-Transform-0.0.1/Makefile.PL' [MSG] [Fri Feb 1 05:22:15 2008] Extracted 'Geo-Point-Plugin-Transform-0.0.1/t/' [MSG] [Fri Feb 1 05:22:15 2008] Extracted 'Geo-Point-Plugin-Transform-0.0.1/t/01.transform.t' [MSG] [Fri Feb 1 05:22:16 2008] Extracted 'Geo-Point-Plugin-Transform-0.0.1/t/00.load.t' [MSG] [Fri Feb 1 05:22:16 2008] Extracted 'Geo-Point-Plugin-Transform-0.0.1/Changes' [MSG] [Fri Feb 1 05:22:16 2008] Extracted 'Geo-Point-Plugin-Transform-0.0.1/lib/' [MSG] [Fri Feb 1 05:22:16 2008] Extracted 'Geo-Point-Plugin-Transform-0.0.1/lib/Geo/' [MSG] [Fri Feb 1 05:22:16 2008] Extracted 'Geo-Point-Plugin-Transform-0.0.1/lib/Geo/Point/' [MSG] [Fri Feb 1 05:22:16 2008] Extracted 'Geo-Point-Plugin-Transform-0.0.1/lib/Geo/Point/Plugin/' [MSG] [Fri Feb 1 05:22:16 2008] Extracted 'Geo-Point-Plugin-Transform-0.0.1/lib/Geo/Point/Plugin/Transform.pm' [MSG] [Fri Feb 1 05:22:16 2008] Extracted 'Geo-Point-Plugin-Transform-0.0.1/META.yml' [MSG] [Fri Feb 1 05:22:16 2008] Extracted 'Geo-Point-Plugin-Transform-0.0.1/MANIFEST' [MSG] [Fri Feb 1 05:22:16 2008] Extracted 'Geo::Point::Plugin::Transform' to '/home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Geo-Point-Plugin-Transform-0.0.1' [MSG] [Fri Feb 1 05:22:20 2008] # running Build.PL /home/cpan/perl5.8.8/bin/perl Build.PL - ERROR: Geo::Point is not installed - ERROR: Geo::Proj is not installed ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions of the modules indicated above before proceeding with this installation Checking whether your kit is complete... Looks good Checking prerequisites... Creating new 'Build' script for 'Geo-Point-Plugin-Transform' version '0.0.1' [MSG] [Fri Feb 1 05:22:20 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Feb 1 05:22:20 2008] Module 'Geo::Point::Plugin::Transform' requires 'Geo::Point' version '0' to be installed [MSG] [Fri Feb 1 05:22:20 2008] Module 'Geo::Point::Plugin::Transform' requires 'Geo::Proj' version '0' to be installed [MSG] [Fri Feb 1 05:22:21 2008] Trying to get 'http://www.cpan.org/authors/id/M/MA/MARKOV/CHECKSUMS' [MSG] [Fri Feb 1 05:22:23 2008] Checksum matches for 'Geo-Point-0.06.tar.gz' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/t/' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/t/22rstr.t' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/t/pod.t' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/t/11point.t' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/t/20pstr.t' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/t/21lstr.t' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/t/09proj.t' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/t/10dms.t' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/lib/' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/lib/Geo/' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/lib/Geo/Shape.pod' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/lib/Geo/Surface.pm' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/lib/Geo/Proj.pm' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/lib/Geo/Proj.pod' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/lib/Geo/Line.pm' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/lib/Geo/Shape.pm' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/lib/Geo/Line.pod' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/lib/Geo/Surface.pod' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/lib/Geo/Point.pod' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/lib/Geo/Space.pod' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/lib/Geo/Space.pm' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/lib/Geo/Point.pm' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/README' [MSG] [Fri Feb 1 05:22:23 2008] Extracted 'Geo-Point-0.06/Makefile.PL' [MSG] [Fri Feb 1 05:22:24 2008] Extracted 'Geo-Point-0.06/META.yml' [MSG] [Fri Feb 1 05:22:24 2008] Extracted 'Geo-Point-0.06/ChangeLog' [MSG] [Fri Feb 1 05:22:24 2008] Extracted 'Geo-Point-0.06/MANIFEST' [MSG] [Fri Feb 1 05:22:24 2008] Extracted 'Geo::Point' to '/home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Geo-Point-0.06' [MSG] [Fri Feb 1 05:22:24 2008] Checking if your kit is complete... Looks good Warning: prerequisite Geo::Distance 0.06 not found. Warning: prerequisite Geo::Proj4 0.96 not found. Warning: prerequisite Math::Polygon 0.003 not found. Writing Makefile for Geo::Point [MSG] [Fri Feb 1 05:22:24 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Feb 1 05:22:24 2008] Module 'Geo::Point' requires 'Geo::Distance' version '0.06' to be installed [MSG] [Fri Feb 1 05:22:24 2008] Module 'Geo::Point' requires 'Geo::Proj4' version '0.96' to be installed [MSG] [Fri Feb 1 05:22:24 2008] Module 'Geo::Point' requires 'Math::Polygon' version '0.003' to be installed [MSG] [Fri Feb 1 05:22:25 2008] Trying to get 'http://www.cpan.org/authors/id/B/BL/BLUEFEET/CHECKSUMS' [MSG] [Fri Feb 1 05:22:25 2008] Checksum matches for 'Geo-Distance-0.11.tar.gz' [MSG] [Fri Feb 1 05:22:25 2008] Extracted 'Geo-Distance-0.11/' [MSG] [Fri Feb 1 05:22:25 2008] Extracted 'Geo-Distance-0.11/README' [MSG] [Fri Feb 1 05:22:25 2008] Extracted 'Geo-Distance-0.11/Changes' [MSG] [Fri Feb 1 05:22:25 2008] Extracted 'Geo-Distance-0.11/test.pl' [MSG] [Fri Feb 1 05:22:25 2008] Extracted 'Geo-Distance-0.11/Makefile.PL' [MSG] [Fri Feb 1 05:22:25 2008] Extracted 'Geo-Distance-0.11/Distance.pm' [MSG] [Fri Feb 1 05:22:26 2008] Extracted 'Geo-Distance-0.11/MANIFEST' [MSG] [Fri Feb 1 05:22:26 2008] Extracted 'Geo::Distance' to '/home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Geo-Distance-0.11' [MSG] [Fri Feb 1 05:22:26 2008] Checking if your kit is complete... Looks good Writing Makefile for Geo::Distance [MSG] [Fri Feb 1 05:22:26 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Feb 1 05:22:29 2008] cp Distance.pm blib/lib/Geo/Distance.pm Manifying blib/man3/Geo::Distance.3 [ERROR] [Fri Feb 1 05:22:29 2008] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/cpan/perl5.8.8/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl Can't locate DBI.pm in @INC (@INC contains: blib/lib blib/arch /home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Geo-Distance-0.11/blib/lib /home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Geo-Distance-0.11/blib/arch /home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Geo-Distance-0.11/blib /home/cpan/perl5.8.8/lib/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl5.8.8/lib/5.8.8 /home/cpan/perl5.8.8/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl5.8.8/lib/site_perl/5.8.8 /home/cpan/perl5.8.8/lib/site_perl .) at test.pl line 3. BEGIN failed--compilation aborted at test.pl line 3. # Looks like your test died before it could output anything. *** Error code 255 Stop. make: stopped in /home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Geo-Distance-0.11 [MSG] [Fri Feb 1 05:22:29 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: DBI As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'Aran Clary Deltac ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'DBI' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin PERL5LIB = :/home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Geo-Distance-0.11/blib/lib:/home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Geo-Distance-0.11/blib/arch:/home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Geo-Distance-0.11/blib PERL5_CPANPLUS_IS_RUNNING = 10820 PERL5_CPANPLUS_IS_VERSION = 0.84 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/pkg/bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cpan/perl5.8.8/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 100 100 EGID: $) = 100 100 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=netbsd, osvers=4.0, archname=i386-netbsd-thread-multi-64int uname='netbsd diafol.bingosnet.co.uk 4.0 netbsd 4.0 (generic) #0: sun dec 16 00:20:10 pst 2007 [EMAIL PROTECTED]:homebuildsabnetbsd-4-0-releasei386200712160005z-objhomebuildsabnetbsd-4-0-releasesrcsysarchi386compilegeneric i386 ' config_args='-e -Dprefix=/home/cpan/perl5.8.8 -Dusethreads -Duse64bitint -Dusemymalloc=n' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/pkg/include', optimize='-O', cppflags='-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/pkg/include' ccversion='', gccversion='4.1.2 20061021 prerelease (NetBSD nb3 20061125)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib' libpth=/usr/pkg/lib /lib /usr/lib libs=-lm -lcrypt -lutil -lc -lposix -lpthread perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E ' cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
