This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear SHLOMIF,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.82. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Tue Feb  5 19:25:35 2008] Trying to get 
'http://www.cpan.org/authors/id/S/SH/SHLOMIF/CHECKSUMS'
[MSG] [Tue Feb  5 19:25:37 2008] Checksum matches for 
'IO-Socket-INET6-2.52.tar.gz'
[MSG] [Tue Feb  5 19:25:37 2008] Extracted 'IO-Socket-INET6-2.52/'
[MSG] [Tue Feb  5 19:25:37 2008] Extracted 'IO-Socket-INET6-2.52/t/'
[MSG] [Tue Feb  5 19:25:37 2008] Extracted 'IO-Socket-INET6-2.52/t/io_udp6.t'
[MSG] [Tue Feb  5 19:25:37 2008] Extracted 
'IO-Socket-INET6-2.52/t/io_multihomed6.t'
[MSG] [Tue Feb  5 19:25:37 2008] Extracted 'IO-Socket-INET6-2.52/t/host6.t'
[MSG] [Tue Feb  5 19:25:37 2008] Extracted 'IO-Socket-INET6-2.52/t/io_sock6.t'
[MSG] [Tue Feb  5 19:25:37 2008] Extracted 'IO-Socket-INET6-2.52/META.yml'
[MSG] [Tue Feb  5 19:25:37 2008] Extracted 'IO-Socket-INET6-2.52/INET6.pm'
[MSG] [Tue Feb  5 19:25:37 2008] Extracted 'IO-Socket-INET6-2.52/MANIFEST'
[MSG] [Tue Feb  5 19:25:37 2008] Extracted 'IO-Socket-INET6-2.52/ChangeLog'
[MSG] [Tue Feb  5 19:25:37 2008] Extracted 'IO-Socket-INET6-2.52/Makefile.PL'
[MSG] [Tue Feb  5 19:25:37 2008] Extracted 'IO-Socket-INET6-2.52/README'
[MSG] [Tue Feb  5 19:25:37 2008] Extracted 'IO::Socket::INET6' to 
'/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52'
[MSG] [Tue Feb  5 19:25:39 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite Socket6 0.12 not found.
Writing Makefile for IO::Socket::INET6

[MSG] [Tue Feb  5 19:25:39 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Tue Feb  5 19:25:39 2008] Module 'IO::Socket::INET6' requires 'Socket6' 
version '0.12' to be installed 
[MSG] [Tue Feb  5 19:25:40 2008] Trying to get 
'http://www.cpan.org/authors/id/U/UM/UMEMOTO/CHECKSUMS'
[MSG] [Tue Feb  5 19:25:40 2008] Checksum matches for 'Socket6-0.19.tar.gz'
[MSG] [Tue Feb  5 19:25:41 2008] Extracted 'Socket6-0.19'
[MSG] [Tue Feb  5 19:25:41 2008] Extracted 'Socket6-0.19/t'
[MSG] [Tue Feb  5 19:25:41 2008] Extracted 'Socket6-0.19/gai.h'
[MSG] [Tue Feb  5 19:25:41 2008] Extracted 'Socket6-0.19/getnameinfo.c'
[MSG] [Tue Feb  5 19:25:41 2008] Extracted 'Socket6-0.19/MANIFEST'
[MSG] [Tue Feb  5 19:25:41 2008] Extracted 'Socket6-0.19/config.h.in'
[MSG] [Tue Feb  5 19:25:41 2008] Extracted 'Socket6-0.19/configure.in'
[MSG] [Tue Feb  5 19:25:41 2008] Extracted 'Socket6-0.19/META.yml'
[MSG] [Tue Feb  5 19:25:41 2008] Extracted 'Socket6-0.19/Socket6.xs'
[MSG] [Tue Feb  5 19:25:41 2008] Extracted 'Socket6-0.19/im-140.diff'
[MSG] [Tue Feb  5 19:25:41 2008] Extracted 'Socket6-0.19/inet_pton.c'
[MSG] [Tue Feb  5 19:25:41 2008] Extracted 'Socket6-0.19/aclocal.m4'
[MSG] [Tue Feb  5 19:25:41 2008] Extracted 'Socket6-0.19/ChangeLog'
[MSG] [Tue Feb  5 19:25:41 2008] Extracted 'Socket6-0.19/inet_ntop.c'
[MSG] [Tue Feb  5 19:25:41 2008] Extracted 'Socket6-0.19/configure'
[MSG] [Tue Feb  5 19:25:41 2008] Extracted 'Socket6-0.19/gailookup.pl.in'
[MSG] [Tue Feb  5 19:25:41 2008] Extracted 'Socket6-0.19/ftpmirror-1.96.diff'
[MSG] [Tue Feb  5 19:25:41 2008] Extracted 'Socket6-0.19/config.pl.in'
[MSG] [Tue Feb  5 19:25:42 2008] Extracted 'Socket6-0.19/Socket6.pm'
[MSG] [Tue Feb  5 19:25:42 2008] Extracted 'Socket6-0.19/README'
[MSG] [Tue Feb  5 19:25:42 2008] Extracted 'Socket6-0.19/Makefile.PL'
[MSG] [Tue Feb  5 19:25:42 2008] Extracted 'Socket6-0.19/getaddrinfo.c'
[MSG] [Tue Feb  5 19:25:42 2008] Extracted 'Socket6-0.19/t/use.t'
[MSG] [Tue Feb  5 19:25:42 2008] Extracted 'Socket6' to 
'/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Socket6-0.19'
[MSG] [Tue Feb  5 19:26:13 2008] checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking whether your Perl5 have PL_sv_undef... yes
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for getaddrinfo... yes
checking for getnameinfo... yes
checking for gethostbyname2... yes
checking for getipnodebyname... yes
checking for getipnodebyaddr... yes
checking for inet_pton... yes
checking for inet_ntop... yes
checking whether you have sa_len in struct sockaddr... yes
checking whether you have sin6_scope_id in struct sockaddr_in6... yes
checking for socklen_t... yes
configure: creating ./config.status
config.status: creating config.pl
config.status: creating gailookup.pl
config.status: creating config.h
Checking if your kit is complete...
Looks good
Writing Makefile for Socket6

[MSG] [Tue Feb  5 19:26:13 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Tue Feb  5 19:26:31 2008] cp Socket6.pm blib/lib/Socket6.pm
/Volumes/Media/smoke/perl562/bin/perl 
/Volumes/Media/smoke/perl562/lib/5.6.2/ExtUtils/xsubpp -noprototypes -typemap 
/Volumes/Media/smoke/perl562/lib/5.6.2/ExtUtils/typemap  Socket6.xs > 
Socket6.xsc && mv Socket6.xsc Socket6.c
gcc -c   -pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing 
-I/usr/local/include -O3   -DVERSION=\"0.19\" -DXS_VERSION=\"0.19\"  
"-I/Volumes/Media/smoke/perl562/lib/5.6.2/darwin-thread-multi/CORE"   Socket6.c
Socket6.xs: In function 'XS_Socket6_getaddrinfo':
Socket6.xs:668: warning: assignment discards qualifiers from pointer target type
Socket6.xs: In function 'XS_Socket6_gai_strerror':
Socket6.xs:724: warning: assignment discards qualifiers from pointer target type
Running Mkbootstrap for Socket6 ()
chmod 644 Socket6.bs
rm -f blib/arch/auto/Socket6/Socket6.bundle
LD_RUN_PATH="" env MACOSX_DEPLOYMENT_TARGET=10.3 cc  -bundle -undefined 
dynamic_lookup -L/usr/local/lib Socket6.o  -o 
blib/arch/auto/Socket6/Socket6.bundle      
chmod 755 blib/arch/auto/Socket6/Socket6.bundle
cp Socket6.bs blib/arch/auto/Socket6/Socket6.bs
chmod 644 blib/arch/auto/Socket6/Socket6.bs

[MSG] [Tue Feb  5 19:26:33 2008] MAKE TEST passed: PERL_DL_NONLAZY=1 
/Volumes/Media/smoke/perl562/bin/perl "-MExtUtils::Command::MM" "-e" 
"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/use....ok
All tests successful.
Files=1, Tests=3,  0 wallclock secs ( 0.12 cusr +  0.04 csys =  0.16 CPU)

[MSG] [Tue Feb  5 19:26:33 2008] Successfully sent 'pass' report for 
'Socket6-0.19'
[MSG] [Tue Feb  5 19:26:38 2008] cp INET6.pm blib/lib/IO/Socket/INET6.pm
Manifying blib/man3/IO::Socket::INET6.3

[ERROR] [Tue Feb  5 19:26:42 2008] MAKE TEST failed:  PERL_DL_NONLAZY=1 
/Volumes/Media/smoke/perl562/bin/perl "-MExtUtils::Command::MM" "-e" 
"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/host6.............Bareword "AF_INET6" not allowed while "strict subs" in use 
at 
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52/blib/lib/IO/Socket/INET6.pm
 line 54.
Bareword "AF_INET6" not allowed while "strict subs" in use at 
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52/blib/lib/IO/Socket/INET6.pm
 line 31.
Compilation failed in require at t/host6.t line 33.
BEGIN failed--compilation aborted at t/host6.t line 33.
dubious
        Test returned status 255 (wstat 65280, 0xff00)
t/io_multihomed6....Bareword "AF_INET6" not allowed while "strict subs" in use 
at 
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52/blib/lib/IO/Socket/INET6.pm
 line 54.
Bareword "AF_INET6" not allowed while "strict subs" in use at 
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52/blib/lib/IO/Socket/INET6.pm
 line 31.
Compilation failed in require at t/io_multihomed6.t line 55.
BEGIN failed--compilation aborted at t/io_multihomed6.t line 55.
dubious
        Test returned status 255 (wstat 65280, 0xff00)
t/io_sock6..........Bareword "AF_INET6" not allowed while "strict subs" in use 
at 
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52/blib/lib/IO/Socket/INET6.pm
 line 54.
Bareword "AF_INET6" not allowed while "strict subs" in use at 
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52/blib/lib/IO/Socket/INET6.pm
 line 31.
Compilation failed in require at t/io_sock6.t line 45.
BEGIN failed--compilation aborted at t/io_sock6.t line 45.
dubious
        Test returned status 255 (wstat 65280, 0xff00)
t/io_udp6...........Bareword "AF_INET6" not allowed while "strict subs" in use 
at 
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52/blib/lib/IO/Socket/INET6.pm
 line 54.
Bareword "AF_INET6" not allowed while "strict subs" in use at 
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52/blib/lib/IO/Socket/INET6.pm
 line 31.
Compilation failed in require at t/io_udp6.t line 75.
BEGIN failed--compilation aborted at t/io_udp6.t line 75.
dubious
        Test returned status 255 (wstat 65280, 0xff00)
FAILED--4 test scripts could be run, alas--no output ever seen

[MSG] [Tue Feb  5 19:26:42 2008] DEFAULT 'proceed_on_test_failure' HANDLER 
RETURNING 'sub return value'

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
          Module Name                        Have     Want
          Socket6                            0.19     0.12

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 3.07e-02.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin
    PERL5LIB = 
:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Socket6-0.19/blib/lib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Socket6-0.19/blib/arch:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Socket6-0.19/blib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Socket6-0.19/blib/lib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Socket6-0.19/blib/arch:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Socket6-0.19/blib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52/blib/lib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52/blib/arch:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Socket-INET6-2.52/blib
    PERL5_CPANPLUS_IS_EXECUTING = 
    PERL5_CPANPLUS_IS_RUNNING = 19032
    PERL5_CPANPLUS_IS_VERSION = 0.82
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /Volumes/Media/smoke/perl562/bin/perl
    UID:  $<  = 502
    EUID: $>  = 502
    GID:  $(  = 502 502
    EGID: $)  = 502 502


-------------------------------


--

Summary of my perl5 (revision 5.0 version 6 subversion 2) configuration:
  Platform:
    osname=darwin, osvers=8.10.0, archname=darwin-thread-multi
    uname='darwin bingos-power-mac-g4-agp-graphics.local 8.10.0 darwin kernel 
version 8.10.0: wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc 
power macintosh powerpc '
    config_args=''
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define 
usemultiplicity=define
    useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
  Compiler:
    cc='cc', ccflags ='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp 
-fno-strict-aliasing -I/usr/local/include',
    optimize='-O3',
    cppflags='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp 
-fno-strict-aliasing -I/usr/local/include'
    ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)', 
gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', 
lseeksize=8
    alignbytes=8, usemymalloc=n, prototype=define
  Linker and Libraries:
    ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib
    libs=-ldbm -ldl -lm -lc
    perllibs=-ldl -lm -lc
    libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a
  Dynamic Linking:
    dlsrc=dl_dyld.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
    cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup 
-L/usr/local/lib'

Reply via email to