This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear MOPY, This is a computer-generated error report created automatically by CPANPLUS, version 0.84. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Wed Feb 6 19:20:22 2008] Trying to get 'http://www.cpan.org/authors/id/M/MO/MOPY/CHECKSUMS' [MSG] [Wed Feb 6 19:20:23 2008] Checksum matches for 'Convert-Temperature-0.02.tar.gz' [MSG] [Wed Feb 6 19:20:24 2008] Extracted 'Convert-Temperature-0.02/' [MSG] [Wed Feb 6 19:20:24 2008] Extracted 'Convert-Temperature-0.02/META.yml' [MSG] [Wed Feb 6 19:20:24 2008] Extracted 'Convert-Temperature-0.02/README' [MSG] [Wed Feb 6 19:20:24 2008] Extracted 'Convert-Temperature-0.02/MANIFEST' [MSG] [Wed Feb 6 19:20:24 2008] Extracted 'Convert-Temperature-0.02/lib/' [MSG] [Wed Feb 6 19:20:24 2008] Extracted 'Convert-Temperature-0.02/lib/Convert/' [MSG] [Wed Feb 6 19:20:24 2008] Extracted 'Convert-Temperature-0.02/lib/Convert/Temperature.pm' [MSG] [Wed Feb 6 19:20:24 2008] Extracted 'Convert-Temperature-0.02/Changes' [MSG] [Wed Feb 6 19:20:24 2008] Extracted 'Convert-Temperature-0.02/Makefile.PL' [MSG] [Wed Feb 6 19:20:24 2008] Extracted 'Convert-Temperature-0.02/t/' [MSG] [Wed Feb 6 19:20:24 2008] Extracted 'Convert-Temperature-0.02/t/Convert-Temperature.t' [MSG] [Wed Feb 6 19:20:24 2008] Extracted 'Convert::Temperature' to '/home/chris/perl588/.cpanplus/5.8.8/build/Convert-Temperature-0.02' [MSG] [Wed Feb 6 19:20:26 2008] Checking if your kit is complete... Looks good WARNING: Setting ABSTRACT via file 'lib/Convert/Temperature.pm' failed at /home/chris/perl588/lib/5.8.8/ExtUtils/MakeMaker.pm line 615 Writing Makefile for Convert::Temperature [MSG] [Wed Feb 6 19:20:26 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Wed Feb 6 19:20:33 2008] cp lib/Convert/Temperature.pm blib/lib/Convert/Temperature.pm Manifying blib/man3/Convert::Temperature.3 [ERROR] [Wed Feb 6 19:20:36 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/Convert-Temperature......"my" variable $res masks earlier declaration in same scope at t/Convert-Temperature.t line 22. "my" variable $res masks earlier declaration in same scope at t/Convert-Temperature.t line 25. "my" variable $res masks earlier declaration in same scope at t/Convert-Temperature.t line 28. "my" variable $res masks earlier declaration in same scope at t/Convert-Temperature.t line 31. # Failed test 'Temperature is ok' # at t/Convert-Temperature.t line 26. # got: '288.15' # expected: '255.372222222222' # Looks like you failed 1 test of 7. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/7 subtests Test Summary Report ------------------- t/Convert-Temperature.t (Wstat: 256 Tests: 7 Failed: 1) Failed test: 5 Non-zero exit status: 1 Files=1, Tests=7, 1 wallclock secs ( 0.06 usr 0.00 sys + 0.16 cusr 0.01 csys = 0.24 CPU) Result: FAIL Failed 1/1 test programs. 1/7 subtests failed. make: *** [test_dynamic] Error 1 [MSG] [Wed Feb 6 19:20:36 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 LANG = en_GB.UTF-8 PATH = /usr/local/bin:/usr/bin:/bin:/usr/games PERL5LIB = :/home/chris/perl588/.cpanplus/5.8.8/build/Convert-Temperature-0.02/blib/lib:/home/chris/perl588/.cpanplus/5.8.8/build/Convert-Temperature-0.02/blib/arch:/home/chris/perl588/.cpanplus/5.8.8/build/Convert-Temperature-0.02/blib PERL5_CPANPLUS_IS_RUNNING = 10151 PERL5_CPANPLUS_IS_VERSION = 0.84 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen.linux Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/chris/perl588/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 1000 1000 46 44 29 25 24 20 EGID: $) = 1000 1000 46 44 29 25 24 20 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.18-5-alpha-generic, archname=alpha-linux-thread-multi uname='linux debbie 2.6.18-5-alpha-generic #1 tue oct 2 23:07:38 utc 2007 alpha gnulinux ' config_args='-e' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8 ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
