This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear David Coppit, This is a computer-generated report for Mail-Mbox-MessageParser-1.5000 on 5.9.3, created automatically by CPAN-Reporter-1.08 and sent to the CPAN Testers mailing list. If you have received this email directly, it is because the person testing your distribution chose to send a copy to your CPAN email address; there may be a delay before the official report is received and processed by CPAN Testers. Thank you for uploading your work to CPAN. However, it appears that there were some problems with your distribution. If these results are not what you expect or if you would like to learn how to avoid FAIL reports for missing dependencies, unsupported operating systems, etc., please consult "Notes for CPAN Authors" on the CPAN Testers Wiki: http://cpantest.grango.org Sections of this report: * Tester comments * Program output * Prerequisites * Environment and other context ------------------------------ TESTER COMMENTS ------------------------------ Additional comments from tester: [none provided] ------------------------------ PROGRAM OUTPUT ------------------------------ Output from '/usr/bin/make test': PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/perl/pH9YdMx/[EMAIL PROTECTED]/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/appended_mailbox.t t/bzip2.t t/endline.t t/filehandle_compressed.t t/filehandle_noncompressed.t t/filename_compressed.t t/filename_noncompressed.t t/grep.t t/gzip.t t/length.t t/line_number.t t/number.t t/offset.t t/prologue.t t/reset.t t/separators.t t/stdin_compressed.t t/stdin_uncompressed.t t/undef_return_value.t t/appended_mailbox..............ok t/bzip2.........................ok t/endline.......................ok t/filehandle_compressed.........ok t/filehandle_noncompressed......Couldn't initialize cache at t/Test/Utils.pm line 100. # Looks like you planned 44 tests but only ran 37. # Looks like your test died just after 37. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 7/44 subtests t/filename_compressed...........ok t/filename_noncompressed........ok t/grep..........................ok t/gzip..........................ok t/length........................ # Failed test 'Computing differences between t/results/length_invalid-boundaries.stdout and t/temp/length_invalid-boundaries_0_1.stdout' # at t/length.t line 97. # Failed test 'Computing differences between t/results/length_mailarc-1-dos.stdout and t/temp/length_mailarc-1-dos_0_0.stdout' # at t/length.t line 97. # Failed test 'Computing differences between t/results/length_mailarc-1-dos.stdout and t/temp/length_mailarc-1-dos_1_0.stdout' # at t/length.t line 97. # Failed test 'Computing differences between t/results/length_mailarc-1-dos.stdout and t/temp/length_mailarc-1-dos_0_1.stdout' # at t/length.t line 97. # Failed test 'Computing differences between t/results/length_mailarc-1.stdout and t/temp/length_mailarc-1_0_0.stdout' # at t/length.t line 97. # Failed test 'Computing differences between t/results/length_mailarc-1.stdout and t/temp/length_mailarc-1_1_0.stdout' # at t/length.t line 97. # Failed test 'Computing differences between t/results/length_mailarc-1.stdout and t/temp/length_mailarc-1_0_1.stdout' # at t/length.t line 97. # Failed test 'Computing differences between t/results/length_mailarc-2.stdout and t/temp/length_mailarc-2_0_1.stdout' # at t/length.t line 97. # Failed test 'Computing differences between t/results/length_mailarc-3.stdout and t/temp/length_mailarc-3_0_0.stdout' # at t/length.t line 97. # Failed test 'Computing differences between t/results/length_mailarc-3.stdout and t/temp/length_mailarc-3_1_0.stdout' # at t/length.t line 97. # Failed test 'Computing differences between t/results/length_mailarc-3.stdout and t/temp/length_mailarc-3_0_1.stdout' # at t/length.t line 97. # Failed test 'Computing differences between t/results/length_mailbox with space.stdout and t/temp/length_mailbox with space_0_1.stdout' # at t/length.t line 97. # Failed test 'Computing differences between t/results/length_mailseparators.stdout and t/temp/length_mailseparators_0_1.stdout' # at t/length.t line 97. # Failed test 'Computing differences between t/results/length_newlines_at_beginning.stdout and t/temp/length_newlines_at_beginning_0_0.stdout' # at t/length.t line 97. Couldn't initialize cache at t/Test/Utils.pm line 100. # Looks like you planned 30 tests but only ran 28. # Looks like you failed 14 tests of 28 run. # Looks like your test died just after 28. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 16/30 subtests t/line_number................... # Failed test 'Computing differences between t/results/line_number_invalid-boundaries.stdout and t/temp/line_number_invalid-boundaries_0_1.stdout' # at t/line_number.t line 97. # Failed test 'Computing differences between t/results/line_number_mailarc-1-dos.stdout and t/temp/line_number_mailarc-1-dos_0_0.stdout' # at t/line_number.t line 97. # Failed test 'Computing differences between t/results/line_number_mailarc-1-dos.stdout and t/temp/line_number_mailarc-1-dos_1_0.stdout' # at t/line_number.t line 97. # Failed test 'Computing differences between t/results/line_number_mailarc-1-dos.stdout and t/temp/line_number_mailarc-1-dos_0_1.stdout' # at t/line_number.t line 97. # Failed test 'Computing differences between t/results/line_number_mailarc-1.stdout and t/temp/line_number_mailarc-1_0_0.stdout' # at t/line_number.t line 97. # Failed test 'Computing differences between t/results/line_number_mailarc-1.stdout and t/temp/line_number_mailarc-1_1_0.stdout' # at t/line_number.t line 97. # Failed test 'Computing differences between t/results/line_number_mailarc-1.stdout and t/temp/line_number_mailarc-1_0_1.stdout' # at t/line_number.t line 97. # Failed test 'Computing differences between t/results/line_number_mailarc-2.stdout and t/temp/line_number_mailarc-2_0_1.stdout' # at t/line_number.t line 97. # Failed test 'Computing differences between t/results/line_number_mailarc-3.stdout and t/temp/line_number_mailarc-3_0_0.stdout' # at t/line_number.t line 97. # Failed test 'Computing differences between t/results/line_number_mailarc-3.stdout and t/temp/line_number_mailarc-3_1_0.stdout' # at t/line_number.t line 97. # Failed test 'Computing differences between t/results/line_number_mailarc-3.stdout and t/temp/line_number_mailarc-3_0_1.stdout' # at t/line_number.t line 97. # Failed test 'Computing differences between t/results/line_number_mailbox with space.stdout and t/temp/line_number_mailbox with space_0_1.stdout' # at t/line_number.t line 97. # Failed test 'Computing differences between t/results/line_number_mailseparators.stdout and t/temp/line_number_mailseparators_0_1.stdout' # at t/line_number.t line 97. # Failed test 'Computing differences between t/results/line_number_newlines_at_beginning.stdout and t/temp/line_number_newlines_at_beginning_0_0.stdout' # at t/line_number.t line 97. Couldn't initialize cache at t/Test/Utils.pm line 100. # Looks like you planned 30 tests but only ran 28. # Looks like you failed 14 tests of 28 run. # Looks like your test died just after 28. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 16/30 subtests t/number........................ # Failed test 'Computing differences between t/results/number_invalid-boundaries.stdout and t/temp/number_invalid-boundaries_0_1.stdout' # at t/number.t line 97. # Failed test 'Computing differences between t/results/number_mailarc-1-dos.stdout and t/temp/number_mailarc-1-dos_0_0.stdout' # at t/number.t line 97. # Failed test 'Computing differences between t/results/number_mailarc-1-dos.stdout and t/temp/number_mailarc-1-dos_1_0.stdout' # at t/number.t line 97. # Failed test 'Computing differences between t/results/number_mailarc-1-dos.stdout and t/temp/number_mailarc-1-dos_0_1.stdout' # at t/number.t line 97. # Failed test 'Computing differences between t/results/number_mailarc-1.stdout and t/temp/number_mailarc-1_0_0.stdout' # at t/number.t line 97. # Failed test 'Computing differences between t/results/number_mailarc-1.stdout and t/temp/number_mailarc-1_1_0.stdout' # at t/number.t line 97. # Failed test 'Computing differences between t/results/number_mailarc-1.stdout and t/temp/number_mailarc-1_0_1.stdout' # at t/number.t line 97. # Failed test 'Computing differences between t/results/number_mailarc-2.stdout and t/temp/number_mailarc-2_0_1.stdout' # at t/number.t line 97. # Failed test 'Computing differences between t/results/number_mailarc-3.stdout and t/temp/number_mailarc-3_0_0.stdout' # at t/number.t line 97. # Failed test 'Computing differences between t/results/number_mailarc-3.stdout and t/temp/number_mailarc-3_1_0.stdout' # at t/number.t line 97. # Failed test 'Computing differences between t/results/number_mailarc-3.stdout and t/temp/number_mailarc-3_0_1.stdout' # at t/number.t line 97. # Failed test 'Computing differences between t/results/number_mailbox with space.stdout and t/temp/number_mailbox with space_0_1.stdout' # at t/number.t line 97. # Failed test 'Computing differences between t/results/number_mailseparators.stdout and t/temp/number_mailseparators_0_1.stdout' # at t/number.t line 97. # Failed test 'Computing differences between t/results/number_newlines_at_beginning.stdout and t/temp/number_newlines_at_beginning_0_0.stdout' # at t/number.t line 97. Couldn't initialize cache at t/Test/Utils.pm line 100. # Looks like you planned 30 tests but only ran 28. # Looks like you failed 14 tests of 28 run. # Looks like your test died just after 28. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 16/30 subtests t/offset........................ # Failed test 'Computing differences between t/results/offset_invalid-boundaries.stdout and t/temp/offset_invalid-boundaries_0_1.stdout' # at t/offset.t line 97. # Failed test 'Computing differences between t/results/offset_mailarc-1-dos.stdout and t/temp/offset_mailarc-1-dos_0_0.stdout' # at t/offset.t line 97. # Failed test 'Computing differences between t/results/offset_mailarc-1-dos.stdout and t/temp/offset_mailarc-1-dos_1_0.stdout' # at t/offset.t line 97. # Failed test 'Computing differences between t/results/offset_mailarc-1-dos.stdout and t/temp/offset_mailarc-1-dos_0_1.stdout' # at t/offset.t line 97. # Failed test 'Computing differences between t/results/offset_mailarc-1.stdout and t/temp/offset_mailarc-1_0_0.stdout' # at t/offset.t line 97. # Failed test 'Computing differences between t/results/offset_mailarc-1.stdout and t/temp/offset_mailarc-1_1_0.stdout' # at t/offset.t line 97. # Failed test 'Computing differences between t/results/offset_mailarc-1.stdout and t/temp/offset_mailarc-1_0_1.stdout' # at t/offset.t line 97. # Failed test 'Computing differences between t/results/offset_mailarc-2.stdout and t/temp/offset_mailarc-2_0_1.stdout' # at t/offset.t line 97. # Failed test 'Computing differences between t/results/offset_mailarc-3.stdout and t/temp/offset_mailarc-3_0_0.stdout' # at t/offset.t line 97. # Failed test 'Computing differences between t/results/offset_mailarc-3.stdout and t/temp/offset_mailarc-3_1_0.stdout' # at t/offset.t line 97. # Failed test 'Computing differences between t/results/offset_mailarc-3.stdout and t/temp/offset_mailarc-3_0_1.stdout' # at t/offset.t line 97. # Failed test 'Computing differences between t/results/offset_mailbox with space.stdout and t/temp/offset_mailbox with space_0_1.stdout' # at t/offset.t line 97. # Failed test 'Computing differences between t/results/offset_mailseparators.stdout and t/temp/offset_mailseparators_0_1.stdout' # at t/offset.t line 97. # Failed test 'Computing differences between t/results/offset_newlines_at_beginning.stdout and t/temp/offset_newlines_at_beginning_0_0.stdout' # at t/offset.t line 97. Couldn't initialize cache at t/Test/Utils.pm line 100. # Looks like you planned 30 tests but only ran 28. # Looks like you failed 14 tests of 28 run. # Looks like your test died just after 28. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 16/30 subtests t/prologue...................... # Failed test at t/prologue.t line 84. Couldn't initialize cache at t/Test/Utils.pm line 100. # Looks like you planned 33 tests but only ran 28. # Looks like you failed 1 test of 28 run. # Looks like your test died just after 28. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 6/33 subtests t/reset.........................Use of uninitialized value $length_to_read in subtraction (-) at /home/sand/.cpan/build/Mail-Mbox-MessageParser-1.5000-rVGgCR/blib/lib/Mail/Mbox/MessageParser/Grep.pm line 413. Use of uninitialized value $length_to_read in numeric ne (!=) at /home/sand/.cpan/build/Mail-Mbox-MessageParser-1.5000-rVGgCR/blib/lib/Mail/Mbox/MessageParser/Grep.pm line 412. Use of uninitialized value in numeric gt (>) at /home/sand/.cpan/build/Mail-Mbox-MessageParser-1.5000-rVGgCR/blib/lib/Mail/Mbox/MessageParser/Grep.pm line 309. Error: Cannot adjust cache data. Please email the author with your mailbox to have him fix the problem. In the meantime, disable the grep implementation. # Looks like you planned 60 tests but only ran 14. # Looks like your test died just after 14. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 46/60 subtests t/separators.................... # Failed test 'Number of emails in t/mailboxes/separators2.sep' # at t/separators.t line 97. # got: '1' # expected: '2' # Failed test 'Number of emails in t/mailboxes/separators1.sep' # at t/separators.t line 97. # got: '1' # expected: '4' # Failed test 'Number of emails in t/mailboxes/separators1.sep' # at t/separators.t line 97. # got: '1' # expected: '4' # Failed test 'Number of emails in t/mailboxes/separators1.sep' # at t/separators.t line 97. # got: '1' # expected: '4' # Looks like you failed 4 tests of 6. Dubious, test returned 4 (wstat 1024, 0x400) Failed 4/6 subtests t/stdin_compressed..............ok t/stdin_uncompressed............ok t/undef_return_value............Couldn't initialize cache at t/Test/Utils.pm line 100. # Looks like you planned 33 tests but only ran 28. # Looks like your test died just after 28. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 5/33 subtests Test Summary Report ------------------- t/filehandle_noncompressed.t (Wstat: 65280 Tests: 37 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 44 tests but ran 37. t/length.t (Wstat: 65280 Tests: 28 Failed: 14) Failed tests: 9-15, 18-21, 24, 27-28 Non-zero exit status: 255 Parse errors: Bad plan. You planned 30 tests but ran 28. t/line_number.t (Wstat: 65280 Tests: 28 Failed: 14) Failed tests: 9-15, 18-21, 24, 27-28 Non-zero exit status: 255 Parse errors: Bad plan. You planned 30 tests but ran 28. t/number.t (Wstat: 65280 Tests: 28 Failed: 14) Failed tests: 9-15, 18-21, 24, 27-28 Non-zero exit status: 255 Parse errors: Bad plan. You planned 30 tests but ran 28. t/offset.t (Wstat: 65280 Tests: 28 Failed: 14) Failed tests: 9-15, 18-21, 24, 27-28 Non-zero exit status: 255 Parse errors: Bad plan. You planned 30 tests but ran 28. t/prologue.t (Wstat: 65280 Tests: 28 Failed: 1) Failed test: 28 Non-zero exit status: 255 Parse errors: Bad plan. You planned 33 tests but ran 28. t/reset.t (Wstat: 65280 Tests: 14 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 60 tests but ran 14. t/separators.t (Wstat: 1024 Tests: 6 Failed: 4) Failed tests: 3-6 Non-zero exit status: 4 t/undef_return_value.t (Wstat: 65280 Tests: 28 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 33 tests but ran 28. Files=19, Tests=285, 19 wallclock secs ( 0.58 usr 0.04 sys + 14.36 cusr 1.50 csys = 16.48 CPU) Result: FAIL Failed 9/19 test programs. 61/285 subtests failed. make: *** [test_dynamic] Fehler 255 ------------------------------ PREREQUISITES ------------------------------ Prerequisite modules loaded: requires: Module Need Have ----------------- ---- ------ FileHandle::Unget 0 0.1621 Storable 0 2.15 Test::More 0 0.74 Text::Diff 0 0.35 ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: LANG = de_DE.UTF-8 PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin PERL5LIB = PERL5_CPANPLUS_IS_RUNNING = 6506 PERL5_CPAN_IS_RUNNING = 6506 SHELL = /usr/bin/zsh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): $^X = /home/src/perl/repoperls/installed-perls/perl/pH9YdMx/[EMAIL PROTECTED]/bin/perl $UID/$EUID = 1005 / 1005 $GID = 1005 1005 $EGID = 1005 1005 Perl module toolchain versions installed: Module Have ------------------- ------- CPAN 1.9205 Cwd 3.27 ExtUtils::CBuilder 0.21 ExtUtils::Command 1.13 ExtUtils::Install 1.44 ExtUtils::MakeMaker 6.42 ExtUtils::Manifest 1.51 ExtUtils::ParseXS 2.11_01 File::Spec 3.27 Module::Build 0.2808 Module::Signature 0.55 Test::Harness 3.07 Test::More 0.74 YAML 0.66 YAML::Syck 1.01 version 0.48 -- Summary of my perl5 (revision 5 version 9 subversion 3) configuration: Platform: osname=linux, osvers=2.6.11-xen0, archname=i686-linux-64int uname='linux k75 2.6.11-xen0 #5 sun jun 19 11:50:51 cest 2005 i686 gnulinux ' config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/perl/pH9YdMx/[EMAIL PROTECTED] -Dinstallusrbinperl=n -Uversiononly -Doptimize=-g -des -Duse64bitint -Dusedevel' hint=recommended, useposix=true, d_sigaction=define useithreads=undef, usemultiplicity=undef useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g', cppflags='-DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='4.0.3 20051023 (prerelease) (Debian 4.0.2-3)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc libc=/lib/libc-2.3.5.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.3.5' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
