This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Zoffix Znet, This is a computer-generated report for POE-Component-CPAN-SQLite-Info-0.07 on 5.8.5, created automatically by CPAN-Reporter-1.08 and sent to the CPAN Testers mailing list. If you have received this email directly, it is because the person testing your distribution chose to send a copy to your CPAN email address; there may be a delay before the official report is received and processed by CPAN Testers. Thank you for uploading your work to CPAN. While attempting to build or test this distribution, the distribution signaled that support is not available either for this operating system or this version of Perl. Nevertheless, any diagnostic output produced is provided below for reference. Sections of this report: * Tester comments * Program output * Prerequisites * Environment and other context ------------------------------ TESTER COMMENTS ------------------------------ Additional comments from tester: [none provided] ------------------------------ PROGRAM OUTPUT ------------------------------ Output from '/usr/bin/make test': PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/maint-5.8/pAAnJ0Y/[EMAIL PROTECTED]/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/01-initialization.............. # Failed test 'use POE::Component::CPAN::SQLite::Info;' # at t/01-initialization.t line 13. # Tried to use 'POE::Component::CPAN::SQLite::Info'. # Error: Perl v5.8.8 required--this is only v5.8.5, stopped at /home/sand/.cpan/build/POE-Component-CPAN-SQLite-Info-0.07-xYXE7e/blib/lib/POE/Component/CPAN/SQLite/Info.pm line 3. # BEGIN failed--compilation aborted at /home/sand/.cpan/build/POE-Component-CPAN-SQLite-Info-0.07-xYXE7e/blib/lib/POE/Component/CPAN/SQLite/Info.pm line 3. # Compilation failed in require at (eval 70) line 2. # BEGIN failed--compilation aborted at (eval 70) line 2. # Looks like you failed 1 test of 9. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/9 subtests t/02-method-same-session.........Perl v5.8.8 required--this is only v5.8.5, stopped at /home/sand/.cpan/build/POE-Component-CPAN-SQLite-Info-0.07-xYXE7e/blib/lib/POE/Component/CPAN/SQLite/Info.pm line 3. BEGIN failed--compilation aborted at /home/sand/.cpan/build/POE-Component-CPAN-SQLite-Info-0.07-xYXE7e/blib/lib/POE/Component/CPAN/SQLite/Info.pm line 3. Compilation failed in require at (eval 33) line 1. BEGIN failed--compilation aborted at (eval 33) line 1. could not import qw(Component::CPAN::SQLite::Info) at t/02-method-same-session.t line 7 BEGIN failed--compilation aborted at t/02-method-same-session.t line 7. # Looks like your test died before it could output anything. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 23/23 subtests t/03-event-same-session..........Perl v5.8.8 required--this is only v5.8.5, stopped at /home/sand/.cpan/build/POE-Component-CPAN-SQLite-Info-0.07-xYXE7e/blib/lib/POE/Component/CPAN/SQLite/Info.pm line 3. BEGIN failed--compilation aborted at /home/sand/.cpan/build/POE-Component-CPAN-SQLite-Info-0.07-xYXE7e/blib/lib/POE/Component/CPAN/SQLite/Info.pm line 3. Compilation failed in require at (eval 33) line 1. BEGIN failed--compilation aborted at (eval 33) line 1. could not import qw(Component::CPAN::SQLite::Info) at t/03-event-same-session.t line 11 BEGIN failed--compilation aborted at t/03-event-same-session.t line 11. # Looks like your test died before it could output anything. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 21/21 subtests t/04-method-another-session......Perl v5.8.8 required--this is only v5.8.5, stopped at /home/sand/.cpan/build/POE-Component-CPAN-SQLite-Info-0.07-xYXE7e/blib/lib/POE/Component/CPAN/SQLite/Info.pm line 3. BEGIN failed--compilation aborted at /home/sand/.cpan/build/POE-Component-CPAN-SQLite-Info-0.07-xYXE7e/blib/lib/POE/Component/CPAN/SQLite/Info.pm line 3. Compilation failed in require at (eval 33) line 1. BEGIN failed--compilation aborted at (eval 33) line 1. could not import qw(Component::CPAN::SQLite::Info) at t/04-method-another-session.t line 12 BEGIN failed--compilation aborted at t/04-method-another-session.t line 12. # Looks like your test died before it could output anything. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 23/23 subtests t/05-event-another-session.......Perl v5.8.8 required--this is only v5.8.5, stopped at /home/sand/.cpan/build/POE-Component-CPAN-SQLite-Info-0.07-xYXE7e/blib/lib/POE/Component/CPAN/SQLite/Info.pm line 3. BEGIN failed--compilation aborted at /home/sand/.cpan/build/POE-Component-CPAN-SQLite-Info-0.07-xYXE7e/blib/lib/POE/Component/CPAN/SQLite/Info.pm line 3. Compilation failed in require at (eval 33) line 1. BEGIN failed--compilation aborted at (eval 33) line 1. could not import qw(Component::CPAN::SQLite::Info) at t/05-event-another-session.t line 12 BEGIN failed--compilation aborted at t/05-event-another-session.t line 12. # Looks like your test died before it could output anything. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 23/23 subtests t/06-errors......................Perl v5.8.8 required--this is only v5.8.5, stopped at /home/sand/.cpan/build/POE-Component-CPAN-SQLite-Info-0.07-xYXE7e/blib/lib/POE/Component/CPAN/SQLite/Info.pm line 3. BEGIN failed--compilation aborted at /home/sand/.cpan/build/POE-Component-CPAN-SQLite-Info-0.07-xYXE7e/blib/lib/POE/Component/CPAN/SQLite/Info.pm line 3. Compilation failed in require at (eval 33) line 1. BEGIN failed--compilation aborted at (eval 33) line 1. could not import qw(Component::CPAN::SQLite::Info) at t/06-errors.t line 7 BEGIN failed--compilation aborted at t/06-errors.t line 7. # Looks like your test died before it could output anything. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 5/5 subtests t/kwalitee.......................skipped: Test::Kwalitee not installed; skipping t/pod-coverage...................ok t/pod............................ok Test Summary Report ------------------- t/01-initialization.t (Wstat: 256 Tests: 9 Failed: 1) Failed test: 9 Non-zero exit status: 1 t/02-method-same-session.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 23 tests but ran 0. t/03-event-same-session.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 21 tests but ran 0. t/04-method-another-session.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 23 tests but ran 0. t/05-event-another-session.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 23 tests but ran 0. t/06-errors.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 5 tests but ran 0. Files=9, Tests=11, 5 wallclock secs ( 0.09 usr 0.01 sys + 2.78 cusr 0.31 csys = 3.19 CPU) Result: FAIL Failed 6/9 test programs. 1/11 subtests failed. make: *** [test_dynamic] Fehler 255 ------------------------------ PREREQUISITES ------------------------------ Prerequisite modules loaded: requires: Module Need Have ---------------------- ------ ------ ! Carp 1.04 1.03 CPAN::SQLite::Info 0.18 0.19 File::Spec 3.2501 3.27 LWP::UserAgent 2.036 2.036 POE 0.9999 0.9999 POE::Filter::Line 1.192 1.1920 POE::Filter::Reference 1.2187 1.2187 POE::Wheel::Run 1.2179 1.2179 Test::More 0 0.74 ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: LANG = de_DE.UTF-8 PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin PERL5LIB = PERL5_CPANPLUS_IS_RUNNING = 14544 PERL5_CPAN_IS_RUNNING = 14544 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/bin/zsh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): $^X = /home/src/perl/repoperls/installed-perls/maint-5.8/pAAnJ0Y/[EMAIL PROTECTED]/bin/perl $UID/$EUID = 1005 / 1005 $GID = 1005 1005 $EGID = 1005 1005 Perl module toolchain versions installed: Module Have ------------------- ------- CPAN 1.92_56 Cwd 3.27 ExtUtils::CBuilder 0.22 ExtUtils::Command 1.13 ExtUtils::Install 1.44 ExtUtils::MakeMaker 6.43_01 ExtUtils::Manifest 1.51 ExtUtils::ParseXS 2.18 File::Spec 3.27 Module::Build 0.2808 Module::Signature 0.55 Test::Harness 3.08 Test::More 0.74 YAML 0.66 YAML::Syck 1.01 version 0.74 -- Summary of my perl5 (revision 5 version 8 subversion 5) configuration: Platform: osname=linux, osvers=2.6.18-4-k7, archname=i686-linux-thread-multi-64int uname='linux k75 2.6.18-4-k7 #1 smp mon mar 26 17:57:15 utc 2007 i686 gnulinux ' config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/maint-5.8/pAAnJ0Y/[EMAIL PROTECTED] -Dinstallusrbinperl=n -Uversiononly -des -Dusethreads -Duse64bitint -Dusedevel -Doptimize=-g -Dnoextensions=Encode' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
