Anil:
On Tue, 12 May 2009, Anil wrote:
> I am trying to do something like this:
>
> However, I get:
> root:~# flowadm add-flow -l vnic0 -a transport=TCP,UDP vnic0
BTW, this will end up creating a TCP-only flow (and not a TCP or UDP). (I
think we should get an error here, will check.)
> root:~# flowadm add-flow -l vnic0 -a transport=TCP,local_port=80 vnic0port80
> flowadm: add flow failed: flow(s) with incompatible attributes exists
>
from the flowadm(1m) man page:
"
The following five types of combinations of attributes are supported:
local_ip[/prefixlen]=address
remote_ip[/prefixlen]=address
transport={tcp|udp|sctp|icmp|icmpv6}
transport={tcp|udp|sctp},local_port=port
dsfield=val[:dsfield_mask]
On a given link, the combinations above are mutually exclusive.
An attempt to create flows of different types will fail.
"
So, in if you have a protocol (tcp) based flow, you can't add another
(on the same link) with protocol-port (tcp/80).
We will revisit these restrictions in the future..
thanks!
-venu
> I must be missing something obvious here... I want to priorities regular
> TCP/UDP traffic vs port 80 traffic.
> --
> This message posted from opensolaris.org
> _______________________________________________
> crossbow-discuss mailing list
> crossbow-discuss at opensolaris.org
> http://mail.opensolaris.org/mailman/listinfo/crossbow-discuss
>
