Hi,
I'm afraid I have some problems understanding how crossbow is supposed to work
;)
On my machine (OpenSolaris, snv_111) I'm running VirtualBox with couple of
linux / XP
installation and additionally a zone with exclusive IP.
My network configuration looks like this:
[6]elsinore:~>dladm show-link
LINK CLASS MTU STATE OVER
bge0 phys 1500 up --
etherstub0 etherstub 9000 unknown --
vnic1 vnic 9000 up etherstub0
vnic2 vnic 9000 up etherstub0
[9]elsinore:~>ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
inet 127.0.0.1 netmask ff000000
bge0: flags=1104843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,ROUTER,IPv4> mtu 1500
index 2
inet 10.1.1.116 netmask fffffe00 broadcast 10.1.1.255
ether 0:19:b9:23:c6:8a
vnic2: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 9000 index
4
inet 192.168.112.254 netmask ffffff00 broadcast 192.168.112.255
ether 2:8:20:fe:8a:63
VirtualBox machines are using bridged neworking, connecting to one of the
virtual vnic2.
vnic2 is plumbed on the host machine, it has assigned IP and it's up.
Additionally I run ipnat
on my host machine (elsinore) for the VirtualBox machines. This all works
brilliantly, my virutal mahines
can access the network, can see my host machine, can see each other.
vnic2 is using 192.168.112.254/24
Zone (called web) is using vnic1. vnic1 is configured to use 192.168.112.253.
I can access zone from my host machine, zone can access the network, but with
one distinction.
I can't access my virtualbox machines.
while trying to ping 192.168.112.253 from one of the VBox systems snoop on the
zone shows ICMP packet incoming, and being send back, but it never arrives to
the VBox system... There's no firewall on the way, all machines are on the same
IP class, ipnat on solaris passess all packets.
What's wrong? ;)
--
Best Regards,
Michal
--
This message posted from opensolaris.org
