Hi,
I am new to vnic and I m trying to setup a zone using one.
I followed a guide I found on a blog however at the end, somehow, the zone
can't ping anything but itself and the global domain.
I can ping the zone just fine though from other computers.
Global domain (192.168.2.50):
----------------------------
root at server:/etc# dladm show-link
LINK CLASS MTU STATE BRIDGE OVER
bnx1 phys 1500 up -- --
bnx0 phys 1500 up -- --
devdb0 vnic 1500 up -- bnx0
Zone devdb (192.168.2.52):
--------------------------------
root at server:/etc# zonecfg -z devdb info
zonename: devdb
zonepath: /data/zones/devdb
brand: ipkg
autoboot: false
bootargs:
pool:
limitpriv:
scheduling-class:
ip-type: exclusive
hostid:
net:
address not specified
physical: devdb0
defrouter not specified
root at devdb:~# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
inet 127.0.0.1 netmask ff000000
devdb0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 192.168.2.52 netmask ffffff00 broadcast 192.168.2.255
ether 2:8:20:f2:e1:23
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252
index 1
inet6 ::1/128
root at devdb:~# netstat -nr
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
-------------------- -------------------- ----- ----- ---------- ---------
default 192.168.2.1 UG 1 0
192.168.2.0 192.168.2.52 U 1 0 devdb0
127.0.0.1 127.0.0.1 UH 1 0 lo0
The default gateway is pretty weird as it does not show the used interface.
That might be the issue but I don't know how to fix it.
Did i miss something else ? any idea ?
Thanks in advance !
Chris
--
This message posted from opensolaris.org
