I just have one single partition. ________________________________________ From: Hwang, Dongseong Sent: Thursday, September 19, 2013 6:56 PM To: Kapade, Mrunal; crosswalk-dev@lists.crosswalk-project.org Subject: RE: Not able to build xwalk rpm for Tizen
Hi, Is your GBS_ROOT in the partition in which your home directory is? Refer to CAUTION! in https://github.com/crosswalk-project/crosswalk-website/wiki/Build-Crosswalk#building-an-rpm-package-for-tizen Br, DS ________________________________________ From: Kapade, Mrunal Sent: Thursday, September 19, 2013 11:09 PM To: Hwang, Dongseong; crosswalk-dev@lists.crosswalk-project.org Subject: RE: Not able to build xwalk rpm for Tizen I had the same hunch yesterday so I increased the free space from ~20GB to ~30GB but no success. Then after your email I freed up additional ~30GB space but got the same result. :( Frustrating thing is, it does the complete rebuild everytime I do gbs build even though it fails in the archive creation stage. Is there a way to avoid complete rebuild and just resume back at the archive creation or whatever the last step was? Mrunal ________________________________________ From: Hwang, Dongseong Sent: Thursday, September 19, 2013 4:44 AM To: Kapade, Mrunal; crosswalk-dev@lists.crosswalk-project.org Subject: RE: Not able to build xwalk rpm for Tizen I have the similar experience when my storage is not enough. Could you check how much your HDD/SDD remain? [ 2998s] error: create archive failed on file /home/abuild/rpmbuild/SOURCES/crosswalk-1.29.4.0.tar: cpio: Bad magic Br, DS ________________________________________ From: crosswalk-dev-boun...@lists.crosswalk-project.org [crosswalk-dev-boun...@lists.crosswalk-project.org] on behalf of Kapade, Mrunal [mrunal.kap...@intel.com] Sent: Thursday, September 19, 2013 2:04 AM To: crosswalk-dev@lists.crosswalk-project.org Subject: [Crosswalk-dev] Not able to build xwalk rpm for Tizen Hi, I am following the instructions on the wiki, https://github.com/crosswalk-project/crosswalk-website/wiki/Development-on-Tizen to build the crosswalk rpm for Tizen for the first time. In the "Bake rpm" step I am following the instructions on https://github.com/crosswalk-project/crosswalk-website/wiki/Build-Crosswalk#building-an-rpm-package-for-tizen. After I run "gbs build -A i586" it runs the build for an hour or so but somehow fails in the end with the error saying, [ 2998s] error: create archive failed on file /home/abuild/rpmbuild/SOURCES/crosswalk-1.29.4.0.tar: cpio: Bad magic Last few lines from the log are pasted below, ... [ 2864s] cpio: crosswalk-1.29.4.0/src/program_lexer.l: Cannot stat: No such file or directory [ 2864s] cpio: crosswalk-1.29.4.0/src/program_parse.tab.c: Cannot stat: No such file or directory [ 2864s] cpio: crosswalk-1.29.4.0/src/program_parse.tab.h: Cannot stat: No such file or directory [ 2864s] cpio: crosswalk-1.29.4.0/src/program_parse.y: Cannot stat: No such file or directory [ 2865s] 301174 blocks ... [ 2995s] Processing files: crosswalk-1.29.4.0-0.i586 [ 2995s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 2995s] cmVxdWVzdD4KPC9tYW5pZmVzdD4= [ 2995s] [ 2995s] Provides: libffmpegsumo.so [ 2995s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 2995s] Requires: /bin/sh /usr/bin/env libX11.so.6 libXcomposite.so.1 libXcursor.so.1 libXdamage.so.1 libXext.so.6 libXfixes.so.3 libXi.so.6 libXrandr.so.2 libXrender.so.1 libasound.so.2 libasound.so.2(ALSA_0.9) libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.11) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.2.3) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.6) libc.so.6(GLIBC_2.7) libc.so.6(GLIBC_2.8) libc.so.6(GLIBC_2.9) libcairo.so.2 libdbus-1.so.3 libdl.so.2 libdl.so.2(GLIBC_2.0) libdl.so.2(GLIBC_2.1) libexpat.so.1 libfontconfig.so.1 libfreetype.so.6 libgcc_s.so.1 libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GCC_3.3.1) libgcc_s.so.1(GCC_3.4) libgcc_s.so.1(GCC_4.0.0) libgcc_s.so.1(GLIBC_2.0) libglib-2.0.so.0 libgobject-2.0.so.0 libicudata.so.48 libicui18n.so.48 libicuuc.so.48 libm.so.6 libm.so.6(GLIBC_2.0) libm.so.6(GLIBC_2.1) libnspr4.so libnss3.so libnss3.so(NSS_3.10) libnss3.so(NSS_3.11) libnss3.so(NSS_ 3.11.1) libnss3.so(NSS_3.11.2) libnss3.so(NSS_3.12) libnss3.so(NSS_3.12.1) libnss3.so(NSS_3.12.3) libnss3.so(NSS_3.12.4) libnss3.so(NSS_3.2) libnss3.so(NSS_3.3) libnss3.so(NSS_3.4) libnss3.so(NSS_3.5) libnss3.so(NSS_3.6) libnss3.so(NSS_3.7) libnss3.so(NSS_3.8) libnss3.so(NSS_3.9) libnss3.so(NSS_3.9.2) libnssutil3.so libnssutil3.so(NSSUTIL_3.12) libnssutil3.so(NSSUTIL_3.12.3) libpango-1.0.so.0 libpangocairo-1.0.so.0 libplc4.so libpthread.so.0 libpthread.so.0(GLIBC_2.0) libpthread.so.0(GLIBC_2.1) libpthread.so.0(GLIBC_2.2) libpthread.so.0(GLIBC_2.3.2) libpthread.so.0(GLIBC_2.3.3) librt.so.1 librt.so.1(GLIBC_2.2) libsmime3.so libsmime3.so(NSS_3.10) libsmime3.so(NSS_3.2) libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.10) libstdc++.so.6(GLIBCXX_3.4.11) libstdc++.so.6(GLIBCXX_3.4.14) libstdc++.so.6(GLIBCXX_3.4.9) libudev.so.0 libxml2.so.2 libxml2.so.2(LIBXML2_2.4.30) libxml2.so.2(LIBXML2_2.6.0) libxml2.so.2(LIBXML2_2.6.6) libxslt.s o.1 [ 2995s] Processing files: crosswalk-debuginfo-1.29.4.0-0.i586 [ 2997s] Processing files: crosswalk-debugsource-1.29.4.0-0.i586 [ 2998s] Processing files: crosswalk-emulator-support-1.29.4.0-0.i586 [ 2998s] Provides: libosmesa.so [ 2998s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 2998s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GCC_3.4) libgcc_s.so.1(GLIBC_2.0) libm.so.6 libm.so.6(GLIBC_2.0) libm.so.6(GLIBC_2.1) libpthread.so.0 libpthread.so.0(GLIBC_2.0) libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(GLIBCXX_3.4) [ 2998s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/crosswalk-1.29.4.0-0.i386 [ 2998s] error: create archive failed on file /home/abuild/rpmbuild/SOURCES/crosswalk-1.29.4.0.tar: cpio: Bad magic warning: build failed, Leaving the logs in /home/mrunal/GBS-ROOT/local/repos/mobile_public/i586/logs/fail/crosswalk-1.29.4.0-0/log error: *** Error Summary *** === the following packages failed to build due to rpmbuild issue (1) === crosswalk-mobile_public-i586: /home/mrunal/GBS-ROOT/local/repos/mobile_public/i586/logs/fail/crosswalk-1.29.4.0-0/log I can also send the complete log file in case you are interested. I have Ubuntu 12.04 and have gbs and mic installed as per the instructions. I also have the .gbs.conf setup as per the instructions in the Wiki. Am I missing something? Anyone faced similar issue? Thanks, Mrunal <https://github.com/crosswalk-project/crosswalk-website/wiki/Build-Crosswalk> _______________________________________________ Crosswalk-dev mailing list Crosswalk-dev@lists.crosswalk-project.org https://lists.crosswalk-project.org/mailman/listinfo/crosswalk-dev _______________________________________________ Crosswalk-dev mailing list Crosswalk-dev@lists.crosswalk-project.org https://lists.crosswalk-project.org/mailman/listinfo/crosswalk-dev
