* Thierry Moreau (thierry.mor...@connotech.com) wrote:
> On 19/04/18 04:22 PM, Victor Martinez wrote:
> > * Fredrik Rinnestam (fred...@rinnestam.se) wrote:
> > > On 2018-04-19 13:59, Thierry Moreau wrote:
> > > > From the Archlinux partition I removed every /<dir> except /boot. Then
> > > > untarred the generic 64b release -- thanks -- to this device.
> > > >
> > > > The Odroid C2 boots with this. I was able to log root/root, and then
> > > > shutdown -h now. But there is no display (I did observe success by the
> > > > keyboard capslock LED going live, and then dead). Lack of display
> > > > shouldn't be too difficult to troubleshoot.
> > >
> > > You should have left /lib/modules in place too
> > >
> > Good catch Fredrik!
> > Hope it helps Thierry.
> >
>
> Yes, good advice. My kernel installation notes indeed referred to
> /lib/{modules,firmware}.
>
I understand the the version inside those directories should be right.
> It did not change the blank display (blank screen hdmi output signal, not
> "no hdmi signal").
>
Is there any specific option for the bootloader?
> - Thierry
>
Regards,
---
Victor Martinez
Learning bit by bit | http://vjml.es
_______________________________________________
crux-arm mailing list
crux-arm@crux-arm.nu
https://crux-arm.nu/mailman/listinfo/crux-arm
