The way I got mine out was to put a thin card under the left and right at the same time, and it releases the catch. I couldn't get a credit card under there, so I had to use my insurance card which is thinner. Then it just pops out....
------------------ Nicholas Crego Yellow 88 CRX Si Commercial Instrument, Single and Multiengine Rated Pilot, Certificated Flight Instructor. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Stephen R. Johns Sent: Friday, May 17, 2002 2:03 PM To: Crx-Post Subject: CRX: Hatch Washer Nozzle Mine gets plugged up, so I use a pin to break up the gunk, then use compressed air to push it away from the nozzle. But, since I don't know how to get the nozzle out of the car and detached from the line, the gunk always comes back in a day or two. Anyone know how to remove the rear washer nozzle? The front ones are easy since you can get to their bottoms easily. I am hoping that I don't have to take apart hald the interior to get access to the rear nozzle. I couldn't find anything about this in Haynes, so if it is in there, let me know what page. Any info greatly appreciated.
