Fred,
You need to replace the water inlet/outlet hoses that go to the heater core inside the cabin. Check out http://www.hondaautomotiveparts.com and look up your year, model, etc. and select "Water-Valve-Duct" from the list. You need the three hoses, Water Inlet hoses A & B and Water Outlet hose. Don't worry about the B16 engine- I've got a D16Z6 (VTEC) in mine and the hoses all match right up. George '89 DX-Hybrid-D16Z6, 119k miles "Seats, Suspension, Engine, next=Nos?" -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Fred Bocskor Sent: Saturday, May 18, 2002 6:45 PM To: CRX Mailing List Subject: CRX: Coolant Leak Okay, ever since I brought my 89 B16A CRX out, I've had an incessant coolant leak. I did the headgasket test, and no go there. I finally tracked it down tonight to the rear of the engine. It's a lot better than I had hoped for. There are two coolant hoses near the back of the engine, just behind and slightly underneath the intake manifold. One of them is right below the throttle body and bends in a u-shape. The other runs from there to the back of the block it seems. What I'm looking for is what other people with B16A swaps used to replace those hoses (parts from what car? stock si?). Any help in general is appreciated, I'd like to get this taken care of soon (I have tomorrow off!). Thanks...Fred
