On 10:48 AM 08/02/02 -0400, Glanz, Phillipa said... >ok so guys -- i got all the locks replaced and recoded --including my >ignition and everything worked out great --until - i got out to my car this >morn-- started her up and TRIED to turn on the heat -nothing-- tried hot >cold 1 2 3 4 etc.. umm all settings and NOTHING! >what would cause this? how would i check what is causing the problem?? what >are a few tests I can do to Diagnose this? >Oh and all the lights behind the buttons work and u can kinda sorta hear a >wirring sound when you TRY to turn it on! >is it maybe the fan?? a belt??
Check the fuse first. If that's OK then you will need to verify that there is voltage (+12VDC) going to the fan blower motor. I believe it's a blue/white wire. I would also check to make sure that the fan switch is securely attached. You may want to pull it and then push it back in to make sure. I ran into this when I last took my center console apart last summer. In my haste, I didn't check the fan switch connection... I recalled connecting it back but I didn't give it a slight tug to make sure it was locked in. Needless to say it wasn't and I was getting intermittent fan performance. Robert K. Kuhn CRX Owners Group President (http://www.crx.org/southcal) 1990 Honda CRXsi (http://drive.to/jiggy) ICQ # 3714283 (nickname: godzilla)
