Il 21/02/08, Marco Marzetti<[EMAIL PROTECTED]> ha scritto: > > Il giorno gio, 21/02/2008 alle 13.00 +0100, Andrea Calo ha scritto: > > > Salve a tutti, > > ho il seguente problema. Ho un collegamento punto-punto su ATM a 2Mbit. > > L'interfaccia mi risulta in UP ma non passa traffico IP. Premetto che > > fino a ieri da 5 anni funzionava tutto. Se provo a pingare l'ip > > dell'altro router, il ping non va. > > se faccio invece un ping ATM end-loopbak funziona: > > > > <<router#ping atm interface atM 1/0.25 VP VC end-loopback > > Type escape sequence to abort. > > Sending 5, 53-byte end-to-end OAM echoes, timeout is 2 seconds: > > !!!!!>> > > > > questo mi fa capire che fino al MUX (si chiama cosi?) non ci sono > > problemi. Quindi il problema sta lato router periferico. Se fosse > > stato il DCE però io avrei dovuto vedere l'interfaccia in down cosa > > che non è. Quindi non riesco a capire se il problema è del router > > stesso o se è un problema di chi mi fornisce la connettività, Telecom > > in questo caso. > > > > Questo è uno show dell'interfaccia lato mio: > > > > <<router#sh interfaces atm 1/0.25 > > ATM1/0.25 is up, line protocol is up > > Hardware is ENHANCED ATM PA > > Description: PUNTO-PUNTO CON CLIENTE > > Internet address is xxx.xxx.xxx.xxx/30 > > MTU 4470 bytes, BW 33920 Kbit, DLY 200 usec, > > reliability 255/255, txload 8/255, rxload 12/255 > > Encapsulation ATM > > 2352 packets input, 4784 cells, 216391 bytes > > 2409 packets output, 4823 cells, 218476 bytes > > 51 OAM cells input, 51 OAM cells output > > AAL5 CRC errors : 0 > > AAL5 SAR Timeouts : 0 > > AAL5 Oversized SDUs : 0>> > > > > questa è la conf dell'interface > > > > interface ATM1/0.25 point-to-point > > description PUNTO-PUNTO CON CLIENTE > > ip address xxx.xxx.xxx.xxx 255.255.255.252 > > ip access-group 120 in > > ip access-group 101 out > > pvc XXX/YY > > abr 1638 1024 > > oam-pvc manage > > encapsulation aal5snap > > ! > > ! > > > > Qualcuno sa aiutarmi? > > > _______________________________________________ > > Cug mailing list > > http://www.areanetworking.it/index_docs.php > > [email protected] > > http://ml.areanetworking.it/mailman/listinfo/cug > > > Hai provato a pingare il segment anzichè la loopback-end? > Forse è solo un problema di tratta ATM tra i due switch del provider. > > > _______________________________________________ > Cug mailing list > http://www.areanetworking.it/index_docs.php > [email protected] > http://ml.areanetworking.it/mailman/listinfo/cug > >
Ho provato a fare il ping come mi hai consigliato tu e anche quello va. <<router#ping atm interface atm 1/0.25 Vp Vc seg-loopback Type escape sequence to abort. Sending 5, 53-byte segment OAM echoes, timeout is 2 seconds: !!!!!>> a cosa serve di preciso il seg-loopback? Ciao e grazie per la risposta _______________________________________________ Cug mailing list http://www.areanetworking.it/index_docs.php [email protected] http://ml.areanetworking.it/mailman/listinfo/cug
