In article <[email protected]>, Kurt Schreiner <[email protected]> wrote: >Hi, > >running a kernel build frome -current source updated some minutes ago >I still get a panic running init: > >00:06:14.668108 --------------------------------- screen start >--------------------------------- >00:06:14.668338 sd2: fabricating a geometry >00:06:14.668617 sd2: 12288 MB, 12288 cyl, 64 head, 32 sec, 512 >bytes/sect x 25165824 sectors >00:06:14.668909 mpt0: page type 0x4 not changeable >00:06:14.669192 mpt0: unable to write Device Page 1 >00:06:14.669465 sd0: fabricating a geometry >00:06:14.669739 sd1: fabricating a geometry >00:06:14.670042 sd2: fabricating a geometry >00:06:14.670315 boot device: sd0 >00:06:14.670588 root on sd0a dumps on sd0b >00:06:14.670861 root file system type: ffs >00:06:14.671134 check_exec: rejecting 0xc804eef0 due to too high entry >address (> 0xbfc00000) >00:06:14.671408 check_exec: rejecting 0xc804eef0 due to too high entry >address (> 0xbfc00000) >00:06:14.671681 exec /sbin/init: error 8 >00:06:14.671980 init: trying /sbin/oinit >00:06:14.672259 exec /sbin/oinit: error 2 >00:06:14.672531 init: trying /sbin/init.bak >00:06:14.672809 exec /sbin/init.bak: error 2 >00:06:14.673087 init: trying /rescue/init >00:06:14.673365 panic: init died (signal 6, exit 12) >00:06:14.673642 fatal breakpoint trap in supervisor mode >00:06:14.673921 trap type 1 code 0 eip c0159b44 cs 8 eflags 246 cr2 >daf36000 ilevel 0 esp daeea9 >00:06:14.674198 7c >00:06:14.674477 curlwp 0xc30802c0 pid 1 lid 1 lowest kstack 0xdaee8000 >00:06:14.674754 Stopped in pid 1.1 (init) at netbsd:breakpoint+0x4: >popl %ebp >00:06:14.675033 db{2}> > >This is from a Netbsd-i386-VM running on VirtualBox 4.3.6 (on MacOSX)
should be fixed now. christos
