Here is my dmesg.boot with DEBUG and DEBUG_GEOM on - it boots fine. Still crashes the same way without them, though. ... Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved.
NetBSD 6.99.41 (D) #2: Tue May 13 12:45:46 BST 2014 root@support6.delcam.local:/root/a64/compile/D total memory = 3071 MB avail memory = 2965 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 AMD Rhapsody (Rev 4) mainbus0 (root) ACPI: RSDP 0xf6fc0 000024 (v02 PTLTD ) ACPI: XSDT 0xbff7b450 00003C (v01 PTLTD XSDT 06040000 LTP 00000000) ACPI: FACP 0xbff7ee46 0000F4 (v03 AMD HAMMER 06040000 PTEC 000F4240) ACPI: DSDT 0xbff7b48c 003946 (v01 AMD-K8 AMDACPI 06040000 MSFT 0100000E) ACPI: FACS 0xbff7ffc0 000040 ACPI: APIC 0xbff7ef3a 000076 (v01 PTLTD APIC 06040000 LTP 00000000) ACPI: SPCR 0xbff7efb0 000050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001) ACPI: All ACPI Tables successfully acquired cpu0 at mainbus0 apid 0: AMD Opteron(tm) Processor 246, id 0xf5a cpu0: erratum 86 present cpu0: erratum 104 present cpu0: erratum 101 present cpu0: WARNING: errata present, BIOS upgrade may be cpu0: WARNING: necessary to ensure reliable operation cpu1 at mainbus0 apid 1: AMD Opteron(tm) Processor 246, id 0xf5a ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x11, 24 pins ioapic1 at mainbus0 apid 3: pa 0xf0000000, version 0x11, 4 pins ioapic2 at mainbus0 apid 4: pa 0xf0001000, version 0x11, 4 pins acpi0 at mainbus0: Intel ACPICA 20131218 acpi0: X/RSDT: OemId <PTLTD , XSDT ,06040000>, AslId < LTP,00000000> acpi0: SCI interrupting at int 9 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 SYSR (PNP0C02) WARNING: module error: vfs load failed for `acpiverbose', error 45 at acpi0 not configured pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12 pckbc2 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1 FDC0 (PNP0700) WARNING: module error: vfs load failed for `acpiverbose', error 45 at acpi0 not configured UAR1 (PNP0501) WARNING: module error: vfs load failed for `acpiverbose', error 45 at acpi0 not configured UAR2 (PNP0501) WARNING: module error: vfs load failed for `acpiverbose', error 45 at acpi0 not configured LPT (PNP0400) WARNING: module error: vfs load failed for `acpiverbose', error 45 at acpi0 not configured ACPI: Enabled 1 GPEs in block 00 to 0F ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-646) WARNING: module error: vfs load failed for `acpiverbose', error 45 attimer1: attached to pcppi1 pckbd0 at pckbc2 (kbd slot) pckbc2: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc2 (aux slot) pckbc2: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0WARNING: module error: vfs load failed for `pciverbose', error 45 WARNING: module error: vfs load failed for `pciverbose', error 45 : vendor 0x1022 product 0x7454 (rev. 0x13) agp0 at pchb0: 2 Miscellaneous Control unit(s) found. agp0: aperture at 0xe0000000, size 0x10000000 ppb0 at pci0 dev 1 function 0WARNING: module error: vfs load failed for `pciverbose', error 45 WARNING: module error: vfs load failed for `pciverbose', error 45 : vendor 0x1022 product 0x7455 (rev. 0x13) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vga0 at pci1 dev 0 function 0WARNING: module error: vfs load failed for `pciverbose', error 45 WARNING: module error: vfs load failed for `pciverbose', error 45 : vendor 0x1002 product 0x4154 (rev. 0x80) wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 radeondrm0 at vga0: ATI FireGL AT T2 radeondrm0: AGP at 0xe0000000 256MB radeondrm0: Initialized radeon 1.29.0 20080613 ppb1 at pci0 dev 6 function 0WARNING: module error: vfs load failed for `pciverbose', error 45 WARNING: module error: vfs load failed for `pciverbose', error 45 : vendor 0x1022 product 0x7460 (rev. 0x07) pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled ohci0 at pci2 dev 0 function 0WARNING: module error: vfs load failed for `pciverbose', error 45 WARNING: module error: vfs load failed for `pciverbose', error 45 : vendor 0x1022 product 0x7464 (rev. 0x0b) csr: 02800017 ohci0: interrupting at ioapic0 pin 19 WARNING: module error: vfs load failed for `pciverbose', error 45 ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 ohci1 at pci2 dev 0 function 1WARNING: module error: vfs load failed for `pciverbose', error 45 WARNING: module error: vfs load failed for `pciverbose', error 45 : vendor 0x1022 product 0x7464 (rev. 0x0b) csr: 02800017 ohci1: interrupting at ioapic0 pin 19 WARNING: module error: vfs load failed for `pciverbose', error 45 ohci1: OHCI version 1.0, legacy support usb1 at ohci1: USB revision 1.0 ohci2 at pci2 dev 4 function 0WARNING: module error: vfs load failed for `pciverbose', error 45 WARNING: module error: vfs load failed for `pciverbose', error 45 : vendor 0x1033 product 0x0035 (rev. 0x41) csr: 02100016 ohci2: interrupting at ioapic0 pin 17 WARNING: module error: vfs load failed for `pciverbose', error 45 ohci2: OHCI version 1.0 usb2 at ohci2: USB revision 1.0 ohci3 at pci2 dev 4 function 1WARNING: module error: vfs load failed for `pciverbose', error 45 WARNING: module error: vfs load failed for `pciverbose', error 45 : vendor 0x1033 product 0x0035 (rev. 0x41) csr: 02100016 ohci3: interrupting at ioapic0 pin 18 WARNING: module error: vfs load failed for `pciverbose', error 45 ohci3: OHCI version 1.0 usb3 at ohci3: USB revision 1.0 ehci0 at pci2 dev 4 function 2WARNING: module error: vfs load failed for `pciverbose', error 45 WARNING: module error: vfs load failed for `pciverbose', error 45 : vendor 0x1033 product 0x00e0 (rev. 0x02) ehci0: interrupting at ioapic0 pin 19 WARNING: module error: vfs load failed for `pciverbose', error 45 ehci0: EHCI version 0.95 ehci0: companion controllers, 3 ports each: ohci2 ohci3 usb4 at ehci0: USB revision 2.0 bge0 at pci2 dev 5 function 0: Broadcom BCM5705 Gigabit Ethernet bge0: interrupting at ioapic0 pin 19 bge0: HW config 00000155, 00000015, 00000000, 00000000 bge0: ASIC BCM5705 A3 (0x3003), Ethernet address 00:0f:ea:5d:15:a1 bge0: setting short Tx thresholds brgphy0 at bge0 phy 1: BCM5705 1000BASE-T media interface, rev. 2 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto satalink0 at pci2 dev 6 function 0: Silicon Image SATALink 3114 (rev. 0x02) satalink0: 33MHz PCI bus satalink0: bus-master DMA support present satalink0: using ioapic0 pin 18 for native-PCI interrupt atabus0 at satalink0 channel 0 atabus1 at satalink0 channel 1 atabus2 at satalink0 channel 2 atabus3 at satalink0 channel 3 pcib0 at pci0 dev 7 function 0WARNING: module error: vfs load failed for `pciverbose', error 45 WARNING: module error: vfs load failed for `pciverbose', error 45 : vendor 0x1022 product 0x7468 (rev. 0x05) viaide0 at pci0 dev 7 function 1: AMD AMD8111 IDE Controller (rev. 0x03) viaide0: bus-master DMA support present viaide0: primary channel configured to compatibility mode viaide0: primary channel interrupting at ioapic0 pin 14 atabus4 at viaide0 channel 0 viaide0: secondary channel configured to compatibility mode viaide0: secondary channel interrupting at ioapic0 pin 15 atabus5 at viaide0 channel 1 amdpm0 at pci0 dev 7 function 3WARNING: module error: vfs load failed for `pciverbose', error 45 WARNING: module error: vfs load failed for `pciverbose', error 45 : vendor 0x1022 product 0x746b (rev. 0x05) timecounter: Timecounter "amdpm0" frequency 3579545 Hz quality 1000 amdpm0: 24-bit timer iic at amdpm0 not configured amdpm0: random number generator enabled (apprx. 57ms) pchb1 at pci0 dev 24 function 0WARNING: module error: vfs load failed for `pciverbose', error 45 WARNING: module error: vfs load failed for `pciverbose', error 45 : vendor 0x1022 product 0x1100 (rev. 0x00) pchb2 at pci0 dev 24 function 1WARNING: module error: vfs load failed for `pciverbose', error 45 WARNING: module error: vfs load failed for `pciverbose', error 45 : vendor 0x1022 product 0x1101 (rev. 0x00) pchb3 at pci0 dev 24 function 2WARNING: module error: vfs load failed for `pciverbose', error 45 WARNING: module error: vfs load failed for `pciverbose', error 45 : vendor 0x1022 product 0x1102 (rev. 0x00) amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration pchb4 at pci0 dev 25 function 0WARNING: module error: vfs load failed for `pciverbose', error 45 WARNING: module error: vfs load failed for `pciverbose', error 45 : vendor 0x1022 product 0x1100 (rev. 0x00) pchb5 at pci0 dev 25 function 1WARNING: module error: vfs load failed for `pciverbose', error 45 WARNING: module error: vfs load failed for `pciverbose', error 45 : vendor 0x1022 product 0x1101 (rev. 0x00) pchb6 at pci0 dev 25 function 2WARNING: module error: vfs load failed for `pciverbose', error 45 WARNING: module error: vfs load failed for `pciverbose', error 45 : vendor 0x1022 product 0x1102 (rev. 0x00) amdnb_misc1 at pci0 dev 25 function 3: AMD NB Misc Configuration isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 pci3 at mainbus0 bus 8 pci3: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok ppb2 at pci3 dev 3 function 0WARNING: module error: vfs load failed for `pciverbose', error 45 WARNING: module error: vfs load failed for `pciverbose', error 45 : vendor 0x1022 product 0x7450 (rev. 0x12) pci4 at ppb2 bus 9 pci4: i/o space, memory space enabled rtk0 at pci4 dev 1 function 0: Realtek 8139 10/100BaseTX (rev. 0x10) rtk0: interrupting at ioapic1 pin 1 rtk0: Ethernet address 00:c0:df:13:2a:be rlphy0 at rtk0 phy 7: Realtek internal PHY rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto aapic0 at pci3 dev 3 function 1WARNING: module error: vfs load failed for `pciverbose', error 45 WARNING: module error: vfs load failed for `pciverbose', error 45 : vendor 0x1022 product 0x7451 (rev. 0x01) ppb3 at pci3 dev 4 function 0WARNING: module error: vfs load failed for `pciverbose', error 45 WARNING: module error: vfs load failed for `pciverbose', error 45 : vendor 0x1022 product 0x7450 (rev. 0x12) pci5 at ppb3 bus 14 pci5: i/o space, memory space enabled pdcsata0 at pci5 dev 2 function 0: Promise PDC20375 SATA150 controller (rev. 0x02) pdcsata0: interrupting at ioapic2 pin 2 pdcsata0: bus-master DMA support present atabus6 at pdcsata0 channel 0 atabus7 at pdcsata0 channel 1 atabus8 at pdcsata0 channel 2 aapic1 at pci3 dev 4 function 1WARNING: module error: vfs load failed for `pciverbose', error 45 WARNING: module error: vfs load failed for `pciverbose', error 45 : vendor 0x1022 product 0x7451 (rev. 0x01) acpicpu0 at cpu0: ACPI CPU acpicpu0: C1: HLT, lat 0 us, pow 0 mW acpicpu1 at cpu1: ACPI CPU timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 satalink0: port 0: device present, speed: 1.5Gb/s satalink0: port 1: device present, speed: 1.5Gb/s satalink0: port 2: device present, speed: 1.5Gb/s satalink0: port 3: device present, speed: 1.5Gb/s wd0 at atabus0 drive 0 wd0: <WDC WD360GD-00FNA0> wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 35304 MB, 71730 cyl, 16 head, 63 sec, 512 bytes/sect x 72303840 sectors uhub0 at usb1: vendor 0x1022 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered uhub1 at usb3: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb0: vendor 0x1022 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 3 ports with 3 removable, self powered uhub3 at usb2: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 3 ports with 3 removable, self powered uhub4 at usb4: vendor 0x1033 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 5 ports with 5 removable, self powered wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(satalink0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) wd1 at atabus1 drive 0 wd1: <ST3120827AS> wd1: drive supports 16-sector PIO transfers, LBA48 addressing wd1: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors wd1: GPT GUID: ef1257a1-6735-11e3-b719-000fea5d15a1 pdcsata0 port 1: device present, speed: 1.5Gb/s pdcsata0 port 0: device present, speed: 1.5Gb/s dk0 at wd1: ef1257d9-6735-11e3-b719-000fea5d15a1 dk0: 234441581 blocks at 34, type: ffs wd1: 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd1(satalink0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) wd2 at atabus2 drive 0 wd2: <WDC WD360ADFD-00NLR4> wd2: drive supports 16-sector PIO transfers, LBA48 addressing wd2: 35304 MB, 71730 cyl, 16 head, 63 sec, 512 bytes/sect x 72303840 sectors wd2: 32-bit data port wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd2(satalink0:2:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) wd3 at atabus3 drive 0 wd3: <WDC WD360ADFD-00NLR5> wd3: drive supports 16-sector PIO transfers, LBA48 addressing wd3: 35304 MB, 71730 cyl, 16 head, 63 sec, 512 bytes/sect x 72303840 sectors wd3: 32-bit data port wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd3(satalink0:3:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) wd4 at atabus6 drive 0 uhidev0 at uhub0 port 2 configuration 1 interface 0 uhidev0: HP HP USB Laser Mouse, rev 2.00/31.00, addr 2, iclass 3/1 ums0 at uhidev0: 3 buttons, W and Z dirs wsmouse1 at ums0 mux 0 pdcsata0:0:0: lost interrupt type: ata tc_bcount: 512 tc_skip: 0 wd4: <ST3120827AS> wd4: drive supports 16-sector PIO transfers, LBA48 addressing wd4: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors wd4: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd4(pdcsata0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) wd5 at atabus7 drive 0 pdcsata0:1:0: lost interrupt type: ata tc_bcount: 512 tc_skip: 0 wd5: <ST3120827AS> wd5: drive supports 16-sector PIO transfers, LBA48 addressing wd5: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors wd5: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd5(pdcsata0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) Kernelized RAIDframe activated pad0: outputs: 44100Hz, 16-bit, stereo audio0 at pad0: half duplex, playback, capture match_bootwedge: dk0 found=0 match_bootwedge: wd0 found=0 match_bootwedge: wd1 found=0 match_bootwedge: wd2 found=0 match_bootwedge: wd3 found=0 match_bootwedge: wd4 found=1 match_bootwedge: wd5 found=0 findroot: BTINFO_BOOTWEDGE wd4 matchbiosdisks: disk 80: flags 2 matchbiosdisks: disk 81: flags 2 matchbiosdisks: disk 82: flags 1 matchbiosdisks: disk 83: flags 1 matchbiosdisks: disk 84: flags 1 matchbiosdisks: disk 85: flags 1 matchbiosdisks: trying to match (dk0) dk: matched with 0 dev ck 0 bios ck ffa matched with 1 dev ck 0 bios ck fdb matchbiosdisks: trying to match (wd0) wd: matched with 0 dev ck ec8 bios ck ffa matched with 1 dev ck ec8 bios ck fdb matchbiosdisks: trying to match (wd1) wd: matched with 0 dev ck ffffffec bios ck ffa matched with 1 dev ck ffffffec bios ck fdb matchbiosdisks: trying to match (wd2) wd: matched with 0 dev ck ec8 bios ck ffa matched with 1 dev ck ec8 bios ck fdb matchbiosdisks: trying to match (wd3) wd: matched with 0 dev ck ec8 bios ck ffa matched with 1 dev ck ec8 bios ck fdb matchbiosdisks: trying to match (wd4) wd: matched with 0 dev ck ffa bios ck ffa matchbiosdisks: matched BIOS disk 80 with wd4 matched with 1 dev ck ffa bios ck fdb matchbiosdisks: trying to match (wd5) wd: matched with 0 dev ck fdb bios ck ffa matched with 1 dev ck fdb bios ck fdb matchbiosdisks: matched BIOS disk 81 with wd5 Component on: wd0a: 72303777 Row: 0 Column: 0 Num Rows: 1 Num Columns: 3 Version: 2 Serial Number: 2013090401 Mod Counter: 2686 Clean: Yes Status: 0 sectPerSU: 64 SUsPerPU: 1 SUsPerRU: 1 RAID Level: 5 blocksize: 512 numBlocks: 72303680 Autoconfig: Yes Root partition: No Last configured as: raid1 Component on: wd2a: 72303777 Row: 0 Column: 1 Num Rows: 1 Num Columns: 3 Version: 2 Serial Number: 2013090401 Mod Counter: 2686 Clean: Yes Status: 0 sectPerSU: 64 SUsPerPU: 1 SUsPerRU: 1 RAID Level: 5 blocksize: 512 numBlocks: 72303680 Autoconfig: Yes Root partition: No Last configured as: raid1 Component on: wd3a: 72303777 Row: 0 Column: 2 Num Rows: 1 Num Columns: 3 Version: 2 Serial Number: 2013090401 Mod Counter: 2686 Clean: Yes Status: 0 sectPerSU: 64 SUsPerPU: 1 SUsPerRU: 1 RAID Level: 5 blocksize: 512 numBlocks: 72303680 Autoconfig: Yes Root partition: No Last configured as: raid1 Component on: wd4a: 234441585 Row: 0 Column: 1 Num Rows: 1 Num Columns: 2 Version: 2 Serial Number: 2013083001 Mod Counter: 1549 Clean: Yes Status: 0 sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1 RAID Level: 1 blocksize: 512 numBlocks: 234441472 Autoconfig: Yes Root partition: Force Last configured as: raid0 Component on: wd5a: 234441585 Row: 0 Column: 0 Num Rows: 1 Num Columns: 2 Version: 2 Serial Number: 2013083001 Mod Counter: 1549 Clean: Yes Status: 0 sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1 RAID Level: 1 blocksize: 512 numBlocks: 234441472 Autoconfig: Yes Root partition: Force Last configured as: raid0 Found: wd0a at 0 Found: wd2a at 1 Found: wd3a at 2 RAID autoconfigure Configuring raid1: Starting autoconfiguration of RAID set... Looking for 0 in autoconfig Found: wd0a at 0 Looking for 1 in autoconfig Found: wd2a at 1 Looking for 2 in autoconfig Found: wd3a at 2 raid1: allocating 30 buffers of 32768 bytes. raid1: RAID Level 5 raid1: Components: /dev/wd0a /dev/wd2a /dev/wd3a raid1: Total Sectors: 144607360 (70609 MB) raid1: GPT GUID: 5b5a0aae-1568-11e3-8834-000fea5d15a1 dk1 at raid1: 5b5a0ae5-1568-11e3-8834-000fea5d15a1 dk1: 144607293 blocks at 34, type: ffs Found: wd5a at 0 Found: wd4a at 1 RAID autoconfigure Configuring raid0: Starting autoconfiguration of RAID set... Looking for 0 in autoconfig Found: wd5a at 0 Looking for 1 in autoconfig Found: wd4a at 1 raid0: allocating 20 buffers of 65536 bytes. raid0: RAID Level 1 raid0: Components: /dev/wd5a /dev/wd4a raid0: Total Sectors: 234441472 (114473 MB) boot device: raid0 root on raid0a dumps on raid0b dump_misc_init: max_paddr = 0xbff70000 mountroot: trying smbfs... mountroot: trying ntfs... mountroot: trying nfs... mountroot: trying msdos... mountroot: trying lfs... mountroot: trying ext2fs... mountroot: trying ffs... root file system type: ffs init: copying out path `/sbin/init' 11 bge0: link state DOWN (was UNKNOWN) rtk0: link state UP (was UNKNOWN) wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) bge0: link state UP (was DOWN) ------------- Chavdar On 12 May 2014 17:18, Christos Zoulas <chris...@zoulas.com> wrote: > On May 12, 4:24pm, ci4...@gmail.com (Chavdar Ivanov) wrote: > -- Subject: Re: Strange boot problems on amd64-current (6.99.40) > > | Just for the record, the suggested patch did not make any difference > | for my problem, which otherwise appears to be linked to this > | discussion - root on raidframe. In my case GENERIC still boots fine if > | I enable DEBUG and DIAGNOSTIC. > > That's a different issue. Can I have your boot messages with the same > debugging as Paul gave before? > > christos -- ----