In article <pine.neb.4.64.1409081844230.5...@6bone.informatik.uni-leipzig.de>, <6b...@6bone.informatik.uni-leipzig.de> wrote: >hello, > >some time ago I reported about a problem with a lsi1030 controller and a >eurostor scsi storage. Now I orderd an adaptec controller. But the same >problem occurs. With linux the storage works fine but netbsd reports a hba >error. > >So I think it is a general problem between netbsd and the eurostor >storage. I tried out some adjustments at the quirk list, but without any >success. > > >linux reports for the adaptec controller: > >[ 39.860038] scsi6 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 >[ 39.860038] <Adaptec 29320LPE PCIe Ultra320 SCSI adapter> >[ 39.860038] aic7901: Ultra320 Wide Channel A, SCSI Id=7, >PCI-X 101-133MHz, 512 SCBs >[ 39.860691] scsi 6:0:0:0: Direct-Access ES-6600 12 Bay Volume >R001 PQ : 0 ANSI: 5 >[ 39.860700] scsi target6:0:0: asynchronous >[ 39.860703] scsi6:A:0:0: Tagged Queuing enabled. Depth 32 >[ 39.860714] scsi target6:0:0: Beginning Domain Validation >[ 39.862644] scsi target6:0:0: wide asynchronous >[ 39.864205] scsi target6:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU >QAS RTI WRF LOW PCOMP (6.25 ns, offset 127) >[ 39.871592] scsi target6:0:0: Ending Domain Validation >[ 39.871821] sd 6:0:0:0: Attached scsi generic sg5 type 0 >[ 39.872107] sd 6:0:0:0: [sdc] 1953121280 512-byte logical blocks: >(999 GB/931 GiB) >[ 40.644106] sd 6:0:0:0: [sdc] Write Protect is off >[ 40.644111] sd 6:0:0:0: [sdc] Mode Sense: cb 00 00 08 >[ 41.158148] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: >enabled, doesn't support DPO or FUA > > >Any ideas what I can try to get the storage workable?
What is that storage exactly? What does NetBSD report? christos