Masanobu SAITOH <[email protected]> writes:
> 0) Did you check /var/log/message if device timouts occured?
No timeouts. Everything behaves as if there were no incoming traffic.
> 1) Is Intel AMT set to enable by BIOS?
No, it's not.
> 2) Could you show me the output of "ifconfig -v wm0"
wm0: flags=0x8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
capabilities=7ff80<TSO4,IP4CSUM_Rx,IP4CSUM_Tx,TCP4CSUM_Rx>
capabilities=7ff80<TCP4CSUM_Tx,UDP4CSUM_Rx,UDP4CSUM_Tx,TCP6CSUM_Rx>
capabilities=7ff80<TCP6CSUM_Tx,UDP6CSUM_Rx,UDP6CSUM_Tx,TSO6>
enabled=0
ec_capabilities=7<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU>
ec_enabled=0
address: 00:26:b9:cd:21:c2
media: Ethernet 100baseTX full-duplex
status: active
input: 0 packets, 0 bytes
output: 20 packets, 2608 bytes, 9 multicasts
inet 169.254.22.67 netmask 0xffff0000 broadcast 169.254.255.255
inet6 fe80::226:b9ff:fecd:21c2%wm0 prefixlen 64 scopeid 0x1
> Is it possible to test with 7.0(RELEASE) and the latest snapshot
> of netbsd-7 branch?
I'll burn a couple of CDs, and try those tonight.
-tih
--
Elections cannot be allowed to change anything. --Dr. Wolfgang Schäuble
